Cờ lê cân lực STAHLWILLE 730NR

Stahlwille 730 NR, with reversible insert ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

Đầu vặn đã gắn kèm sản phẩm

Có thể thay bằng các đầu vặn khác:

331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Linh kiện gốc:
331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực đầu tháo rời thay thế STAHLWILLE 730 N

Stahlwille 730 N, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

tag: 730n

Made in Germany

Cờ lê cân lực STAHLWILLE 730R

Stahlwille 730 R, with reversible adapter ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers, accuracy ±4% according to DIN/ISO 6789, with factory test certificate, rugged construction, quick setting of torque with slide and locking button.

Đầu vặn Đàbao gồm

Có thể dùng đầu vặn khác thay thế:

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

Link kiện gốc:

331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực STAHLWILLE 730, 730Quick

Stahlwille 730, for clockwise and counter-clockwise tightening. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.
Stahlwille 730 Quick, for clockwise and counter-clockwise tightening. More ergonomic and with increased comfort; improved access and operation of the clamping lever recessed in the handle. Optimised ball handle for fatigue-free work. The new design with opposite, V-shaped mounts and integrated magnifier allows settings to be adjusted quickly and accurately - even from an awkward angle. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

Made in Germany

Cờ lê cân lực STAHLWILLE 730 FIX

Stahlwille 730 Fix, for series production tasks; the adjusting knob can be removed after the torque has been set, preventing inadvertent changes to the settings. The Torx® tamper-resistant screw also protects against unwanted manipulation, just like the enclosed adhesive seal; settings cannot be adjusted without breaking the seal. For clockwise and counter-clockwise tightening by turning over the insert tools. Robust design, rapid adjustment of torque with QuickSelect; the torque is set and then locked by pulling out the adjusting knob and turning it. Two-component handle with ergonomic green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol). A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached; accuracy ±3% in accordance with DIN 6789. No need for manual reset to zero, since the measuring element is only under load while force is being applied. Supplied with factory certificate, Torx® tamper-resistant screw and adhesive seal. Without insert tool.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Made in Germany

Cờ lê cân lực STAHLWILLE

Stahlwille Manoskop 755, without setting scale, for series production work; setting via torque tester on the Allen screw at the end of the handle. Repeatability ±4%. The reversible adapter tools permit anticlockwise work.
Adapter tools NOT included.

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

tag: 755/4, 755/10, 755/20, 755/30

Made in Germany

Cờ lê cân lực điện tử STAHLWILLE 730 D

STAHLWILLE Manoskop 730 D combines indicating and triggering functions in a single device, both function modes can be selected independently of each other. Quick adjustment via keypad; large display; tactile and acoustic signalling at slip point; with tolerance value input and visual evaluation via green and red display colours; memory for up to 7500 torques, can be evaluated via USB interface, display deviation ± 2% ± 1 digit. Display function even with left-hand torques. Automatic indication of next calibration date. Included in delivery: 2x 1.5-V batteries, factory test certificate and case, insertion tool not included.

Designs:
331435.0100...331435.0200: in plastic case
331435.0300...331435.0700: in sheet steel box

Appropriate accessories:
331460 Accessories for electronic torque wrench STAHLWILLE
331600 Ratchet insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool


Appropriate batteries:
2 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).

Made in Germany

Cờ lê cân lực điện tử STAHLWILLE 701/2

• indicating
• slim, compact shape for smaller torques from 1 N·m upwards
• measuring units: N·m, cN·m, ft·lb, in·lb
• measurements independent of the point of application of force
• additional functions using SENSOMASTER 4 software (not included, free download at www.stahlwille.de):

- adjustable joints

- evaluation of tightening operation by means of coloured LEDs, buzzer and vibration

- calibrating interval adjustable

- logging function

• supplied with 3.6 V lithium battery, type 14500, packed in accordance with UN3091, Class 9
• calibration in conjunction with perfectControl® calibrating unit No 7794 or complete calibration system No 7706. Readjustment does not require disassembly
• certificate in accordance with DIN EN ISO 6789-2:2017
• in sturdy plastic box
• display deviation value ± 4%

96 50 46 02 - As for 96 50 45 02, but without battery (not hazardous)

tag: 701/2

Made in Germany

Cờ lê cân lực điện tử STAHLWILLE 730 DR

STAHLWILLE Manoskop 730 DR combines indicating and triggering functions in a single device, both function modes can be selected independently of each other. Quick adjustment via keypad; large display; tactile and acoustic signalling at slip point; with tolerance value input and visual evaluation via green and red display colours; memory for up to 7500 torques, can be evaluated via USB interface, display deviation ± 2% ± 1 digit, display function even with left-hand torques. Automatic indication of next calibration date. Included in delivery: Reversible ratchet insert, 2x 1.5-V batteries, factory test certificate and case.

Designs:
10...100 Nm...20...200 Nm: in plastic case
40...400 Nm: in sheet metal box

Appropriate accessories:
331460 Accessories for electronic torque wrench STAHLWILLE
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Appropriate batteries:
2 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).

Made in Germany

Cờ lê cân lực điện tử STAHLWILLE 713R

STAHLWILLE Sensotork^® 713R, with angle of rotation measurement; torque and angle of rotation are visible at the same time; convenient angle measurement without reference arm in an extremely large angle range. Backlit display also for evaluation of the tightening operation (traffic-light colours) Simple and flexible operation through menu navigation on large display, particularly large measuring range (from 5% to 100% of the nominal value) with a display deviation of ± 1% of the measured value. With reversible ratchet adapter tool, with quick-release safety lock, for clockwise and anticlockwise tightening, measurement not dependent on the force application point, wide choice of different units of measurement; warning time for visual, tactile and audible signals can be set; individually adjustable adapter tool lengths; password-protected against accidental changes and unauthorized access; with data output; complies with DKD-R 3-7, class 2 and DIN EN ISO 6789.Package contents: reversible ratchet socket, 2 batteries 1.5 V, factory test certificate and case.

Designs:
3...60 Nm...10...200 Nm: in plastic case
20...400 Nm: in sheet-steel case

Appropriate accessories:
331460 Accessories for electronic torque wrench STAHLWILLE
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Appropriate spare parts:
331600 Ratchet insert STAHLWILLE

TAG: 713R/6, 713R/20, 713R/40

Made in Germany

Cờ lê lực điện tử STAHLWILLE

STAHLWILLE MANOSKOP® 714 - indicating and click-type. Display deviation value torque ± 2 %, ± 1 digit; display deviation value angle ± 1 %, ± 1 digit, 4 measuring modes (torque, angle, torque backed up by angle, angle backed up by torque), high-definition colour display with additional side-mounted indicator lamps, freely configurable menu structure. 3 function modes: cut-out, peak (indicating mode with peak value) and track (indicating mode with current value), micro USB interface. Angle-controlled measurement without a reference arm, data storage (= 2,500 tightening jobs), as many as 200 joints can be programmed in up to 25 preset sequences, different tolerance limits can be set for each joint. Acoustic and visual assessment of the joint, the automatic keypad lock prevents inadvertent changes. Overload protection by means of acoustic and visual signals and a fail-safe system (clockwise), automatic notification of the next calibration date, either by the number of joints or the time interval. Units of measure: N m, ft lb, in lb. Tightening torque is automatically corrected if a deviating extension is entered, immediately reusable after release. Clockwise and anticlockwise tightening - it may be necessary to refit the insert tool rotated through 180° for anticlockwise tightening in the cut-out mode. Tactile and acoustic trigger signal, torque and angle are simultaneously visible. Package contents: 2 certificates (torque, angle), SENSOMASTER Basic software, USB cable, 4 micro-batteries, in case (without insert tool).

Appropriate accessories:
331560 Lithium-ion battery STAHLWILLE
331562 Docking station STAHLWILLE
331563 Rest for docking station STAHLWILLE
331565 Software STAHLWILLE SENSOMASTER
331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Appropriate batteries:
4 pieces 055050.0400 - LR03 / 1.5 V (AAA) (included in scope of delivery).

Made in Germany

Cờ lê cân lực điện tử STAHLWILLE

STAHLWILLE MANOSKOP® 714 - indicating and click-type, with reversible ratchet socket. Display deviation value torque ± 2 %, ± 1 digit; display deviation value angle ± 1 %, ± 1 digit, 4 measuring modes (torque, angle, torque backed up by angle, angle backed up by torque), high-definition colour display with additional side-mounted indicator lamps, freely configurable menu structure. 3 function modes: cut-out, peak (indicating mode with peak value) and track (indicating mode with current value), micro USB interface. Angle-controlled measurement without a reference arm, data storage (= 2,500 tightening jobs), as many as 200 joints can be programmed in up to 25 preset sequences, different tolerance limits can be set for each joint. Acoustic and visual assessment of the joint, the automatic keypad lock prevents inadvertent changes. Overload protection by means of acoustic and visual signals and a fail-safe system (clockwise), automatic notification of the next calibration date, either by the number of joints or the time interval. Units of measure: N m, ft lb, in lb. Tightening torque is automatically corrected if a deviating extension is entered, immediately reusable after release. Clockwise and anticlockwise tightening - it may be necessary to refit the insert tool rotated through 180° for anticlockwise tightening in the cut-out mode. Tactile and acoustic trigger signal, torque and angle are simultaneously visible. Package contents: reversible ratchet socket, 2 certificates (torque, angle), SENSOMASTER Basic software, USB cable, 4 micro-batteries, in case.

Appropriate accessories:
331560 Lithium-ion battery STAHLWILLE
331562 Docking station STAHLWILLE
331563 Rest for docking station STAHLWILLE
331565 Software STAHLWILLE SENSOMASTER
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Appropriate spare parts:
331600 Ratchet insert STAHLWILLE
LT000054333 735/100 - Ratchet insert tool
Appropriate batteries:
4 pieces 055050.0400 - LR03 / 1.5 V (AAA) (included in scope of delivery).

Made in Germany

Cờ lê cân lực điện tử TOP

Features
Both right and left directions can be measured.
The LCD backlight allows you to see the measured values ​​even when working in dark places.
Measured torque values ​​(in peak hold mode) can be recorded.
The arrival of the target torque value is notified by the lighting of the LED and the sound.
With 72 gears and a ratchet drive angle of 5°, the swing width is small, making it possible to work in narrow spaces.
It is compact with a round head.
Usage
Bicycles, automobiles, architecture, construction, water supply, electric power industry, etc.
For tightening that requires torque management, measurement of return torque, etc.

Made in Japan