Bộ vam tháo vòng bi trong SUPERTOOL-1647148

Features
A special tool for pulling out the inner ring of bearings.
Chuck the inner claw to the inner diameter of the bearing and set it on the stand. After that, turn the nut to remove the bearing.
The maximum reach of the nail is 150 mm.

tag: bp15s, bp30s, bp30fs

Made in Japan

Cảo tháo vòng bi trong SUPERTOOL-2836645

tag: bpj0, bpj1, bpj2, bpj3, bpj4, bpj5, bpj6, bpj7

Made in Japan

Vam đĩa chặn SUPERTOOL-2884607

Features
With a claw thickness of 1 mm or less, it fits in narrow gaps.
A type that alternately tightens the nuts of both male screws.
It is an auxiliary tool that is ideal for pulling out bearings and gears that are G / GL type and have no gaps for claws to enter.

tag: bs1, bs2, bs4

Made in Japan

Vam đĩa chặn SUPERTOOL-2884615

Features
With a claw thickness of 1 mm or less, it fits in narrow gaps.
It is a type that tightens only the speeder screw.
It is an auxiliary tool that is ideal for pulling out bearings and gears that are G / GL type and have no gaps for claws to enter.

tag: bs1s, bs2s

Made in Japan

Bộ vam tháo vòng bi FACOM

Facom U.306J1, sheet metal box containing 1 outside puller U.306A140, 7-140 mm, 3 inside arms U306G2, 1 slide hammer U.306M, 1 counterstay U.40, 1 set nuts/washers.

Appropriate spare parts:
365240 External puller FACOM
365250 Accessories FACOM
 

Made in Italy

Bộ vam tháo vòng bi KUKKO 70-A

To remove grooved ball bearings without causing damage and without having to dismantle the shaft. Pulling hook developed specifically for precise installation in the bearing's tracks for ideal level of support and better extension force. Quick and secure selection thanks to markings on the pulling hooks. Set in L-BOXX.

Made in Germany

Bộ vam tháo vòng bi KUKKO

for ball bearings which sit on the shaft in a housing, access is in the bearing rings, which means that the ball cage has to be destroyed. After that the ball segments are introduced into the pull tabs between the inner and outer ring of the bearing corresponding to the balls of the bearing and set by turning 90°.

Packaging:
365300.0100 69-A ...365300.0200 69-B : L-BOXX mini
365300.0300 69-C : L-BOXX

Made in Germany

Bộ vam tháo vòng bi KUKKO K-22

Kukko K-22, universal composition for extracting internal bearings, bearing outer rings and bushes. The arms of the counter stays can be adjusted effortlessly due to an internal spring, 2-shell design of the internal puller with extra large gripping edges allows for secure extraction, internal pullers have an internal stop safety device against overvoltage and overload effects, combinable both with counter stays or sliding hammers.

Designs:
365305.0100 K-22-A Set with counter stay 22-1, 4 x 2-shell internal pullers 21-00, 21-02, 21-2 and 21-4, sliding hammer device 22-0, 3-C handle for sliding hammer G-22 and threaded adapter M7 to M10 GA7-10, supplied in handy i-Boxx with foam insert

Appropriate spare parts:
365470 Inside puller KUKKO
365480 Bridge yoke KUKKO
365485 Slide hammer KUKKO

Made in Germany

Bộ vam tháo vòng bi SIMATOOL

For removal of deep-groove ball bearings without removing the shaft, puller handle made of quality steel with joint and elastic retaining ring for optimal force transfer to the bearing; case contains 6 sets of puller legs and 2 threaded spindles, selection table for deep-groove ball bearings.

Made in Switzerland

Bộ vam tháo vòng bi SIMATOOL

50-piece combination kit for fast, precise and safe installation and removal of bearings with bore diameters from 10 to 30 mm and easy assembly of bushes, sealing rings, pulleys etc. A versatile installation tool with impact sleeves and fitting impact rings is included. A three-leg puller for deep-groove ball bearings up to 85 mm bore diameter is available for the removal. Delivered in plastic case, with selection table and instructions.

Made in Switzerland

Bộ vam tháo vòng bi KUKKO K-20-15

For removing and separating ball bearings, roller bearings, inner rings and other flush parts. Delivered in L-BOXX (2 Pcs.) 

Containing:
1 puller 20-1+, span 90 mm, clamping depth 100 mm
1 pulle 20-2+, span 160 mm, clamping depth 150 mm
1 pair pulling hooks 1-192-P, clamping depth 200 mm
1 pair pulling hooks 2-302-P, clamping depth 300 mm
1 separating unit for ball bearings 15-2, clamping range 115 mm
1 hydraulic press, power 15 t, stroke 12 mm

Made in Germany

Bộ vam tháo vòng bi KUKKO K-2030-10-S

2- and 3-arm universal puller set in L-BOXX, with narrow puller legs for very narrow clearance.
Contents:
1 2-arm puller 20-10-SP, clamping width 120 mm, clamping depth 100 - 350 mm
1 3-arm puller 30-10-SP, clamping width 130 mm, clamping depth 100 - 350mm
1 mechanical pressure spindle 614250 length 250 mm, thread M 14 x 1.5 mm

Made in Germany

Bộ vam tháo bánh răng KUKKO

In L-BOXX, for detaching ball joints, gear wheels etc., where there is no space for a hook. Set with separating unit, pulling unit and extension pair.

Appropriate spare parts:
365390 Separating unit KUKKO
365410 Pulling unit KUKKO
365420 Extensions KUKKO

Made in Germany

Bộ vam tháo bi trong FACOM

Facom U.49PJ1, for easy and reliable pulling of ball bearings, etc., consisting of:
6 inside pullers U.49P2 - U.49P7
2 non-tapped beams U.53KL0 and U.52KL2
1 adaptor tip U.49BR1

Made in Italy

Bộ vam giật KUKKO KS-22-01

For quick pulling of ball bearings and especially in tight spaces instead of normal bridge yokes. After applying the inside puller, screw the slide hammer rod to the wedge spindle and operate slide hammer. Ergonomically shaped solid handle for optimal force transfer. During the pulling operation the slide hammer rod disappears completely into the handle, thus avoiding crushing and abrasions on hands. Delivered in plastic case, containing:
1 slide hammer KS-22-01-GH 1.7 kg
6 adapters M3...M10, for mounting on slide hammer
3 adapters for mounting the inside puller 21-0...21-8

Made in Germany

Bộ vam giật KUKKO 223

For pulling and extracting parts with threaded holes. The appropriate threaded insert is screwed into the threaded hole in the part to be extracted, which is subsequently performed by striking forcefully with the slide hammer. Indispensable for pulling pins with internal thread, such as DIN 7978/ISO8736 or DIN 7979/ISO 8735. Puller, complete, consisting of:
1 slide hammer KS-22-01-GH
10 threaded inserts M3, M4, M5, M6, M8, M10, M12, M14, M16, M18

Made in Germany

Bộ vam tháo vòng bi KUKKO 24-B

large puller and extractor set in 2 L-BOXX.
Contents:
1 2-arm puller 43-1, clamping width 60 mm, clamping depth 50 mm
1 2-arm puller 20-1, clamping width 90 mm, clamping depth 100 mm
1 2-arm puller 20-2, clamping width 160 mm, clamping depth 150 mm
8 Interior extractor 21-1 to 21-8, for holes 12 - 70 mm
2 Counter-supports 22-1 + 22-2
1 pulling chuck 23, for ball bearing-inner rings Ø 5 - 32 mm

Appropriate spare parts:
365030 2-leg puller KUKKO
365150 Small puller KUKKO
365470 Inside puller KUKKO
365480 Bridge yoke KUKKO

Made in Germany

Bộ vam tháo vòng bi SUPERTOOL-3683583

Features
Ideal for pulling out bearings and gears without gaps.
A puller set that is ideal for pulling out pulleys with large diameters.
Use
For pulling out narrow gaps.

tag: g1000, g2000, g4000

Made in Japan

Bộ vam tháo vòng bi SUPERTOOL-3684075

Features
A puller set that is ideal for pushing in and pulling out bearings, gears, pulleys, etc. that are deep in depth.
Use
For pulling out work with narrow gaps.

tag: p1000, p2000, p4000

Made in Japan