Eto bàn khoan chính xác cao TRUSCO

Features
As standard equipment, it comes with a V-groove cap (hardness HRC50-55) that is convenient for tightening round and deformed objects, and has excellent holding power.

TAG: PV75, PV100, PV125

Made in Japan

Eto bàn khoan chính xác cao NERIOX

With three face-milled contact surfaces: Normal position, right and front side. Machine different sides without the need for re-clamping. Simple design, cast body, with universal mounting fixture, movable jaw guided laterally, fixed jaw with V-blocks, both clamping jaws with offset.

Made in Germany

Eto máy chính xác NERIOX

Made from tool steel, hardened and ground on all sides, parallelism and squareness 0.005 mm/100 mm, useable on 4 seats. Horizontal and vertical V-block in the movable jaw.

Made in Germany

Eto máy chính xác PFL

fast, precise, powerful, large clamping widths. Rugged main body of cast iron GG 70, support surfaces and guides hardened and ground, clamping screw with ball bearing for maximum clamping forces.
Tolerance ± 0.01 mm.

Appropriate accessories:
310530 Jaws PFL
310535 Accessories PFL


Supplied together with 1 pair of single-step clamping jaws, 2 chuck keys.

Made in Switzerland

Má kẹp PFL

Usable with:
310520 Machine vice PFL

Other jaws available upon request.

Made in Switzerland

Linh kiện cho Eto máy PFL

Appropriate accessories:
260120 T slot block
260140 T-slot block
260160 T-slot block long
760510 Socket head cap screws fully threaded
760515 Socket head cap screws partially threaded

Usable with:
410520 Machine vice PFL

Other accessories available upon request.

Made in Switzerland

Eto máy chính xác ROEHM

modern design of special cast construction. Long design of the movable jaw, spindle protected against fouling and swarf. Clamping jaws reversible, one side smooth, the other with flutes.

Appropriate accessories:
310555 Swivel plate RÖHM


Jaw width 200 mm on request.

Made in Germany

Đế xoay Eto RÖHM

with scale

Usable with:
310550 Machine vice RÖHM RS

Made in Germany

Eto máy chính xác NERIOX

Mechanical clamping system, steel body with hardened and ground guides, low construction, clamping repeatability 0.02 mm, with hold-down jaws.
Slot for T-nut: 20mm

Made in Germany

Eto máy áp lực cao NC FUTURO

Compact NC high pressure vice, ground on one side, with power intensifier, mechanical/mechanical manually operated.
 

• Basic side clamping
• Long cast iron body (GGG) with chip grooves
• Drive spindle with default clamping force
• Stable chip protection against ingress of chips

Scope of delivery: With stepped jaws and crank handle.

Made in Germany

Má kẹp Eto thủy lực KOPAL

Quick and reliable clamping of multiple workpieces of different thicknesses or forms at the same time, the pressure fingers distributed over the entire jaw width transfer the full clamping force to the components, for thickness differences up to 8 mm, suitable for all vices, quick assembly, per piece.

Max. clamping force:
Type F 12: 12 contact fingers: 42 kN
Type F 14: 14 contact fingers: 49 kN
Type F 18: 12 contact fingers: 92 kN

Appropriate accessories:
310795 Set of inserts KOPAL For Force pistons with threaded hole


Other versions are available (with V-jaws, larger jaw widths).

Made in France

Set of inserts KOPAL, For Force pistons with threaded hole

Interchangeable inserts
The different inserts allow clamping of unshaped/non-machined parts.

Application:
abgerundet: for wavy and curved parts
flach: for machined parts
geriffelt: for rough parts
spitz: for wavy and curved parts

Usable with:
310790 Hydraulic vice jaw KOPAL

Made in France

Eto máy 5 trục ALLMATIC TeleCentric 70

Area of application:

Ideal for use on 5-axis machining centres
Conventional clamping and grip clamping possible

Product features:
- Telescopic spindle, interference contour remains unchanged
- Centric, simple programming without zero offset
- Allowance of the material is symmetrically distributed
- Accessibility of the workpiece is independent of the span
- Symmetrical design = workpiece remains centred and parallel
- Quick change jaw system, tool-free jaw change using quick release
10 seconds per pair of jaws
- Reversible jaws: for min./max. spans with a jaw pair
- Constant clamping force by means of low-maintenance telescopic spindle

Appropriate accessories:
311005 Accessories ALLMATIC TeleCentric


Scope of delivery:
1 TeleCentric 70 without jaws
1 support plate for transport
1 hand crank for pre-setting

Made in Germany

Linh kiện Eto máy 5 trục ALLMATIC TeleCentric

Usable with:
311000 5-axis power vice ALLMATIC TeleCentric 70
311020 NC high pressure vice ALLMATIC NC 8

Made in Germany

Eto máy áp lực cao ALLMATIC NC 8

Area of application:

Ideal for use on 3- and 4-axis machining centres
For conventional clamping

Product features:

- Tool-free power setting in 11 stages with a mechanical stop for safe operation
- Constant, reproducible clamping force using mechanical power booster
- Proven low-maintenance and encapsulated high-pressure spindle resulting in minimal cleaning effort
- Base frame from GJS-60
- Guideway inductively hardened and ground
- Aligning slots on the bottom
- Standard with mounting holes Ø 25H6 M10 for zero point clamping systems; Pitch 200 mm ± 0.01 mm
- Flatness of base frame 0.01 mm
- Height of base frame ground -0.02 mm
- Width of base frame ground -0.05 mm, meaning this side can be used
- Quick change system for attachment jaws and stepped bars
- Total length is independent of the size of the workpiece
- 3 threads per side for lateral workpiece stops M8
- Connecting thread for angle drive


Scope of delivery:
- 1 high pressure vice with stepped jaws
- 1 hand crank
- 4 adjustable clamps

Made in Germany

Eto máy siêu chính xác FRIBOSA, with spindle and V-block

In precision design, system precision 0.005 mm, all relevant surfaces are orthogonal and true to gauge, made of top-rate steel, hardened and ground on all sides, the hold-down system prevents the workpiece from lifting off and firmly secures it in position, no juddering of the workpieces, the spindle with trapezoidal thread can withstand high clamping pressures, suitable for use in drilling, surface grinding, milling, jig boring and in rooms for precision measuring. Horizontal V-block in the movable jaw.

Appropriate accessories:
312180 Crank
312290 Guide flange


Package contents: without clamping lever.

Made in Switzerland

Eto máy chính xác FRIBOSA, with spindle and bore, without V-block

Smooth with bores for holding soft jaws.
In precision design, system precision 0.005 mm, all relevant surfaces are orthogonal and true to gauge, made of top-rate steel, hardened and ground on all sides, the hold-down system prevents the workpiece from lifting off and firmly secures it in position, no juddering of the workpieces, the spindle with trapezoidal thread can withstand high clamping pressures, suitable for use in drilling, surface grinding, milling, jig boring and in rooms for precision measuring.

Appropriate accessories:
312180 Crank
312280 Soft jaw
312290 Guide flange


Package contents: without clamping lever.

Made in Switzerland

Tay xoay Eto FRIBOSA

Usable with:
312100 Hold-down machine vice FRIBOSA with spindle and V-block
312120 Hold-down machine vice FRIBOSA with spindle and bore, without V-block
312200 Hold-down machine vice FRIBOSA without spindle with V-block
312220 Hold-down machine vice FRIBOSA without spindle and bore, without V-block

Made in Switzerland

Eto máy chính xác FRIBOSA, without spindle with V-block

Precision version without spindle, system accuracy 0.003 mm. The workpiece is clamped using an Allen key (with handle). When the vice is released, the movable jaw is automatically pushed away from the workpiece. The workpiece can be removed without any further intervention (it is not necessary to push the jaw away by hand) Area of application: on all machine tools, but primarily for measuring and monitoring purposes and plunge EDM. Horizontal V-block in the movable jaw.

Appropriate accessories:
312180 Crank
312290 Guide flange


Package contents: With chuck key.

Made in Switzerland