Bộ mũi khoan đa tầng MAKE

In metal case.

Consisting of:
157500.0100: 1 pieces Multistep drill Type Multistep L1-S 4.0-12.0 mm
157500.0200: 1 pieces Multistep drill Type Multistep L2-S 6.0-20.0 mm
157500.0300: 1 pieces Multistep drill Type Multistep L3-S 6.0-30.0 mm

Made in Germany

Mũi khoan đa tầng MAKE

Type Multistep, HSS, TiN, with two spiral-shaped cutting grooves and fixed drill, cylindrical shank with three-surface grind.
Because of TiN coating has longer useful life, higher cutting speeds and reduced edge build-ups.

Mua bộ mũi khoan tầng:

157540 Set of multistep drills

Made in Germany

Bộ mũi khoan đa tầng MAKE

TiN coating, in metal case.

TiN coating gives longer service life, higher cutting speeds and reduced edge build-ups.

Consisting of:
157530.0100: 1 pieces Multistep drill Type Multistep, HSS, TiN L1-S TiN 4.0-12.0mm
157530.0200: 1 pieces Multistep drill Type Multistep, HSS, TiN L2-S TIN 6.0-20.0 mm
157530.0300: 1 pieces Multistep drill Type Multistep, HSS, TiN L3-S TIN 6.0-30.0 mm

Made in Germany

Mũi khoan đa tầng MAKE

Multistep, HSS, cylindrical shank with three-surface grind, and through-hole, replaceable drill section 7 mm.
Application
Usable for soft and stainless steel sheet metal, a wide ange of plastics, Plexiglas, fibreglass, for metals up to 4 mm thick.
Essential for mounting and assembly tasks as it can be used in hand-held drills. No pre-drilling necessary; drills directly into solid material without problems.
replacement bits

Appropriate spare parts:
157610 Replacement drills

Made in Germany

Mũi khoan đa tầng MAKE

Multistep PG, HSS, cylindrical shank with three-surface grind and through-hole, replaceable drill section 7 mm.mm
Application
Designed for electrical applications, sized for holes for steel conduit threads (Panzer Gewinde, PG). Considerable savings of work time when producing holes for PG.

Designs:
E 1: For though holes
E 2: For tap holes

Appropriate spare parts:
157610 Replacement drills

Made in Germany

Mũi khoan đa tầng MAKE

Multistep E3S, plasma-nitrided, HSS, with three surface grind and through-hole, with 7 mm drill section.
Application
For fine metric threads to DIN 60403, tap holes and through holes.

Appropriate spare parts:
157610 Replacement drills

Made in Germany

Mũi khoan đa tầng MAKE

Hexagon mount 1/4"
Designed for mounting in three-jaw chuck or directly in all 1/4" hexagon mounts of pneumatic and cordless drivers. Drills holes in steel and non-ferrous metals up to 5 mm thick. Precision-ground quality from high-tempered HSS.

Made in United kingdom

Mũi khoan đa tầng HHS-E Co5 FUTURO

HSS-E Co5, coated, cylinder(without flat, HA), three-surface grind
In a practical plastic box.
Properties:
Sturdy design for drilling and chamfering in one operation. The additional 60° groove is used for deburring thin-walled sheet metal.
Special coating to increase the service life and improve the surface quality.

Made in Germany

Bộ mũi khoan đa tầng HHS-E Co5 FUTURO

HSS-E Co5, coated, cylinder(without flat, HA), three-surface grind
In a practical plastic box.
Properties:
Sturdy design for drilling and chamfering in one operation. The additional 60° groove is used for deburring thin-walled sheet metal.
Special coating to increase the service life and improve the surface quality.

Consisting of:
157650.0100: 1 pieces Multistep drill FUTURO HSS-E Co5, coated 4…12
157650.0200: 1 pieces Multistep drill FUTURO HSS-E Co5, coated 4…20
157650.0300: 1 pieces Multistep drill FUTURO HSS-E Co5, coated 4…30

Made in Germany

Mũi khoan nón MAKE

Type KSB conical
HSS, cylindrical shank with three-surface grind, cone 20°, twist ground inside.
The progressive boring drill makes holes in thin materials without pre-boring, and expands existing holes. Can also be used for slanted holes and tubes.

Is part of:
157750 Set of taper drills
 

Made in Germany

Mũi khoan nón MAKE

Type KSB tapered
HSS, TiN coating, cylindrical shank with three-surface grind, taper 20°, twist ground inside.
The progressive boring drill makes holes in thin materials without pre-boring, and expands existing holes. Can also be used for slanted holes and tubes.
Because of TiN coating has longer useful life, higher cutting speeds and reduced edge build-ups.

Is part of:
157760 Set of taper drills

Made in Germany

Bộ mũi khoan nón MAKE

In metal case.

Consisting of:
157700.0100: 1 pieces Progressive boring bit HSS Type KSB 20° conical, cylinder shaft Size 0 3.0-14.0 mm
157700.0200: 1 pieces Progressive boring bit HSS Type KSB 20° conical, cylinder shaft Size 1 8.0-20.0 mm
157700.0300: 1 pieces Progressive boring bit HSS Type KSB 20° conical, cylinder shaft Size 2 16.0-30.5 mm

Made in Germany

Bộ mũi khoan nón MAKE

With TiN coating, in metal case.
TiN coating gives longer service life, higher cutting speeds and reduced edge build-ups.

Consisting of:
157710.0100: 1 pieces Progressive boring bit KSB Cylinder shaft, HSS-TiN Size 0 TIN 3.0-14.0 mm
157710.0200: 1 pieces Progressive boring bit KSB Cylinder shaft, HSS-TiN Size 1 TIN 8.0-20.0 mm
157710.0300: 1 pieces Progressive boring bit KSB Cylinder shaft, HSS-TiN Size 2 TIN 16.0-30.5 mm

Made in Germany

Mũi khoan nón MAKE

Hexagon mount 1/4".
Suitable for mounting in three-jaw chuck or directly in all 1/4" hexagon mounts on drills and portable drivers. For holes in all ferrous and non-ferrous metals to a thickness of 2 mm.

Made in United kingdom