Thùng dụng cụ FACOM Jet M3S

Facom Jet M3S, drawers with full extension and individual drawer retention Safety Lock System, prevents opening of several drawers at the same time. Holds 3 tool modules per drawer; extremely rugged sheet steel construction with SOFT buffers on the four corners, static load capacity 900 kg, worktop made of deep-drawn aluminium 2 mm thick reinforced with wood board 15 mm thick, fully integrated push handle, 2 side edges which retract under load with holders for 16 screwdrivers, 2 fixed edges front and back.

Central locking with folding key; 4 heavy duty wheels Ø 125 mm, 2 swivelling, 2 fixed, 1 with locking brake; epoxy-powder paintwork; side walls perforated for hanging tools on hooks or holders.

Side walls and rear wall can accommodate a variety of accessories such as holders for jerrycans, additional cabinet etc.

Tool trolley is delivered WITHOUT contents

Made in France

Thùng dụng cụ 8 ngăn FACOM JET.8NM3A

Facom Jet M3A, holding capacity of 3 tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the 4 corners, reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for 8 screwdrivers, which slide into the worktop under heavy loads. Centralised locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 swivelling, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.

Made in France

Thùng dụng cụ FACOM JET.8NM3AS

Facom Jet M3AS, holding capacity of three tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the four corners. Equipped with the Safety Lock System, which prevents several drawers from being opened at the same time, therefore preventing the trolley from falling forwards. Reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for eight screwdrivers. Centralised locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 swivelling, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.

Tool trolley is delivered WITHOUT contents

Made in France

Module dụng cụ tổng hợp FACOM CM.162CH

In plastic trays, supplied in 12 modules for 4 drawers.

Content:
439845.0200 CM.162CH MOD.RL161-26 - 1/4" hex socket set
MOD.440-1XL - 17 combination wrenches 6 - 24 mm
MOD.SL161-46 - 1/2" hex socket set
MOD.MI7 - striking tools
MOD.CPE - 3 mechanic's pliers
MOD.PR12 - 2 adjustable pliers
MOD.A1 - 8 Protwist screwdrivers slot and Phillips
MOD.A2 - 8 Protwist screwdrivers slot, Phillips and Pozidrive
MOD.ANXR -7 Protwist screwdrivers for Torx screws
MOD.467FJ12 - 12 Hinged ratchet combination wrenches 8 - 19 mm
MOD.JL161-36 - 3/8" hex socket set
MOD.HLB - hex sockets long 3/8" - 7 - 11 mm + 1/2" - 12 - 19 mm

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Appropriate spare parts:
439890 Module FACOM, impact tool set
439900 Module FACOM, adjustable pliers
439936 Module FACOM, screwdrivers for Resitorx® screws

Made in France

Khay nhựa đựng tuýp vặn & lục giác FACOM MOD.R161-26

In plastic tray.

Content:
439870.0100 MOD.R161-26 10 hex socket bits 5.5-14 mm, sliding tee, ratchet, 2 extensions 55 + 150 mm, spinner handle, coupler 1/4", universal joint, 3 bits for slotted screws sizes 4.5, 6.5, 8, 2 bits for Pozidriv Nos. 1+2, 4 bits for Allen screws sizes 3-6mm and 10 hexagon keys 2-10 mm

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Made in France

Khay nhựa tô vít FACOM MOD.AT1

In plastic tray.

Content:
439876.0200 MOD.AT1 6 slotted screwdrivers 2.5 x 75, 3.5 x 100, 4 x 100, 5.5 x 125, 6.5 x 150, 8 x 175 and 2 Phillips screwdrivers PH Nos. 1 + 2

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Made in France

Khay nhựa đựng bộ tuýp 1/2'' FACOM MOD.S161-36

In plastic tray.

Content:
439880.0100 MOD.S161-36 17 hex socket bits sizes 10-32 mm, ratchet, 2 extensions 125 + 250 mm, universal joint

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Appropriate spare parts:
328940 Hex socket FACOM OGV^®
329300 Reversible ratchet FACOM
329520 Extension FACOM
329650 Universal joint FACOM

Made in France

Khay nhựa đựng cờ lê FACOM MOD.440-1

In plastic tray.

Content:
439884.0100 MOD.440-1 16 combination wrenches 440 - 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24 mm

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Appropriate spare parts:
321269 Combination wrench FACOM OGV^®

Made in France

Khay nhựa đựng búa, đục & đột FACOM MOD.MI7

In plastic tray.

Content:
439890.0200 MOD.MI7 1 cross pein hammer 500 g, 1 plastic hammer Ø 32 mm, 3 parallel pin punches 4, 5 + 6 mm, 1 centre punch 6 x 115 mm, 1 flat chisel 24 x 200 mm

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Made in France

Khay nhựa đựng cờ lê FACOM MOD.44-1

In plastic tray.

Content:
439895.0100 MOD.44-1 9 open-end wrenches 44 - 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 21 x 23, 22 x 24 mm

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Appropriate spare parts:
321269 Combination wrench FACOM OGV^®

Made in France

Khay nhựa đựng kìm FACOM MOD.PR12

In plastic tray.

Content:
439900.0200 MOD.PR12 1 multigrip pliers 250 mm, 1 automatic locking pliers 250 mm

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Appropriate spare parts:
321269 Combination wrench FACOM OGV^®

Made in France

Khay nhựa đựng kìm FACOM MOD.CPEA0

In plastic tray.

Content:
439905.0200 MOD.CPEA0 1 telephone pliers 200 mm, combination pliers 180 mm, 1 diagonal cutters 160 mm

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Appropriate spare parts:
321269 Combination wrench FACOM OGV^®

Made in France

Khay nhựa đựng kìm mở phe FACOM MOD.PC

In plastic tray.

Content:
439910.0100 MOD.PC 2 circlip pliers (1, 90° curved) for external circlips 18 - 60 mm, 2 circlip pliers (1, 90° curved) for internal circlips 18 - 60 mm

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Appropriate spare parts:
345000 Circlip pliers for internal rings FACOM
345020 Circlip pliers for internal rings FACOM
345090 Circlip pliers for external rings FACOM
345110 Circlip pliers for external rings FACOM

Made in France

Khay nhựa đựng đột chốt FACOM MOD.CG

In plastic tray.

Content:
439915.0100 MOD.CG Comprising: 6 parallel pin punches 249.G Ø 2 - 8 mm, 4 taper punches 247.G Ø 4 - 8 mm, 1 centre punch 6 mm

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Made in France

Khay nhựa đựng đục & đột FACOM MOD.CG1

In plastic tray.

Content:
439916.0100 MOD.CG1 3 parallel pin punches 249.G Ø 12, 14, 16 mm, flat chisels 263.G of width 19, 20, 22 mm, cross-cut chisel 265.G of width 18 mm

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Appropriate spare parts:
353600 Parallel pin punch FACOM

Made in France

Khay nhựa đựng cờ lê FACOM, OGV® MOD.440-2PB

In plastic tray.

Content:
439919.0100 MOD.440-2PB 4 combination wrenches 440 - 27, 29, 30, 32 mm

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Appropriate spare parts:
321269 Combination wrench FACOM OGV^®

Made in France

Khay nhựa đựng cờ lê FACOM MOD.44-2

In plastic tray.

Content:
439925.0100 MOD.44-2 3 open-end wrenches 44 - 26 x 28, 27 x 29, 30 x 32 mm

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Appropriate spare parts:
321060 Double open-end wrench FACOM

Made in France

Khay nhựa tô vít FACOM MOD.AT2

In plastic tray.

Content:
439931.0200 MOD.AT2 2 slotted screwdrivers 2 x 75 + 2.5 x 75, 2 Phillips screwdrivers Nos. 0 x 75, 3 x 150, 4 Pozidriv screwdrivers Nos. 0 x 75, 1 x 100, 2 x 125, 3 x 150

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Made in France

Khay nhựa tô vít đầu sao FACOM MOD.ATXR

In plastic tray.

Content:
439936.0200 MOD.ATXR 7 screwdrivers for Resitorx® screws T10 x 75, T15 x 75, T20 x 100, T25 x 100, T27 x 100, T30 x 125, T40 x 150

Usable with:
439803 Tool caddy FACOM
439804 Tool caddy FACOM
439807 Tool caddy FACOM

Made in France