Cảo chữ C SUPERTOOL

Since the jaw depth is large, you can tighten the depth deeply. Since the head is hexagonal, you can tighten it with a wrench at the end. The adapter (sink at the tip of the screw) can be replaced. Cationic electrodeposition coating.

tag: cc50e, cc75e, cc100e, cc125e, cc150, cc200

Made in Japan

Cảo chữ F thông minh BESSEY

The GearKlamp transmission clamp enables you to master all clamping tasks comfortably, even under extremely cramped conditions — including in spaces that have been inaccessible or hard to access with clamping tools in the past.

Product features
- Two-component plastic handle positioned around the rail so the clamp can be used in tight spaces
- Easy-to-move trapezoidal thread spindle with swivelling pressure plate
- Quick-release shift button to quickly adjust sliding bar
- Clamping force up to 2000 N

Made in Germany

Cảo chữ F NERIOX-319524

According to DIN 5117, made of malleable cast iron, hollow profile rail ribbed on one side, zinc-plated, spindle black finished, with beechwood handle and plastic protective caps.

Cảo chữ F TURNUS-319525

Malleable cast iron, with solid steel rail corrugated on both sides, galvanized, black-oxide finish on spindle.

Made in Germany

Cảo chữ F NERIOX-319538

Made of steel, hardened and tempered, sliding clamp die-forged, bright zinc-plated, spindle with black finished.

Cảo chữ F TURNUS-319565

of steel, tempered, zinc-plated. Ergonomic lever handle, self-locking detent tooth segment, plastic-coated release lever.

Made in Germany

Cảo chữ F TURNUS-319575

heavy design, rail and fixed bow of drawn profile steel, tempered, sliding bow drop-forged, zinc-plated, spindle with gunmetal finish, pressure plate movable up to 35°, making it possible to clamp even slanted workpieces. For extremely heavy loads in steelworking, locksmith shops, mechanical engineering, etc. For max. clamping pressure up to approx. 12 000 N at 150 mm clamping width.

Made in Germany

Cảo chữ F TURNUS-319581

heavy design, rail and fixed bow of drawn profile steel, tempered, sliding bow drop-forged, zinc-plated, spindle with gunmetal finish, pressure plate movable up to 35°, making it possible to clamp even slanted workpieces. For extremely heavy loads in steelworking, locksmith shops, mechanical engineering, etc. For max. clamping pressure up to approx. 22'000 N at 150 mm clamping width.

Made in Germany

Cảo chữ F TURNUS-319596

heavy design, rail and fixed bow of drawn profile steel, tempered, sliding bow drop-forged, zinc-plated, spindle with gunmetal finish, pressure plate movable up to 35°, making it possible to clamp even slanted workpieces. Ideal for clamping T-girders, U-profiles and for reaching over objects.

Made in Germany

Cảo chữ C kẹp nhanh BAHCO

Bahco QCG, with comfortable handle for operation from any angle, even upside down and back to front. Narrow design for use in confined spaces. Quick-change clamping device for use as a clamp or spreader. Soft and medium-soft pads with V-groove for gripping pipes or brackets. Easy to convert into a spreader, simple release mechanism, delivered with product data in a durable plastic case.

Made in Sweden

Cảo chữ C kẹp nhanh BAHCO

Bahco QCB, with comfortable handle for operation from any angle, even upside down and back to front. Variable quick release mechanism increases power and makes it easier to reach the clamping force as the head is in contact with the workpiece. Quick-change clamping device for use as a clamp or spreader. Replaceable jaws with V-grooves. Easy to convert into a spreader, simple release mechanism.

Made in Sweden

Cảo chữ C QUICK-GRIP-319610

One-handed clamp with revolver handle and trigger lever for setting the clamping pressure, quick clamping pressure setting, trigger lever for instant release of the clamp. Clamping jaws and handle of high-tech glass fibre reinforced nylon, extremely rugged. Clamping rod of hardened steel, soft caps to protect the workpieces.

Made in Usa

Cảo chữ F BAHCO

Bahco 420SH, professional screw clamp with one movable and one fixed clamping arm on a galvanised profile steel rail. Specially designed high-performance handle for a comfortable grip. Robust, weather-resistant design, galvanised guide rail and screw, plastic protective caps on the movable clamping surfaces, suitable for a wide range of surface shapes. High-quality plastic protective caps protect the clamped workpieces.

Made in Sweden

Cảo chữ F FUTURO

Robust malleable cast iron screw clamp with a clamping force of up to 5500 N, stable hollow profile rail with fluting, high-quality and ergonomic two-component handle for high force transmission, protective caps on the clamping surfaces.

Made in Germany

Cảo chữ F FUTURO

Robust all-steel screw clamp with a clamping force of up to 5000 N, tempered sliding and fixed clamp for spring and elastic clamping, high-quality and ergonomic two-component handle for high force transmission.

Made in Germany

Cảo kẹp nhanh KANT-TWIST 

first-rate industrial design; closes quickly on workpieces of any thickness, hand-tightening is sufficient, no overwinding or slipping-off of the holding surfaces, solid construction, clamps 40% stronger than common clamps, but only weighs half as much.

Made in Usa

Cảo kẹp nhanh KANT-TWIST 

first-rate industrial design; closes quickly on workpieces of any thickness, hand-tightening is sufficient, no overwinding or slipping-off of the holding surfaces, solid construction, clamps 40% stronger than common clamps, but only weighs half as much. Stainless design, for use primarily when working with chemicals.
 

Made in Usa

Cảo kẹp nhanh KANT-TWIST 

first-rate industrial design; closes quickly on workpieces of any thickness, hand-tightening is sufficient, no overwinding or slipping-off of the holding surfaces, solid construction, clamps 40% stronger than common clamps, but only weighs half as much. Made of aluminium, with parallel guide.

Made in Usa

Cảo kẹp nhanh KANT-TWIST 

For round parts, top-quality industrial design; clamps quickly onto workpieces of any thickness, hand tightening is enough, no overtightening, gripping surfaces will not "walk off centre", solid construction, clamps 40% more strongly than conventional clamps but weighs half as much.
 

Made in Usa