Máy đột dập tay quay FEHLMANN

green RAL 6026.

Made in Switzerland

Máy đột dập tay quay WEIDMANN

for broaching, straightening, pressing, bending, riveting, embossing, punching. Rugged construction, large inside height, long stroke, gear spline shaft of high-quality case-hardened steel, bearing points of the drive shaft ground, force-feed lubrication.

Appropriate accessories:
370080 Table

Available upon request: Mechanical presses with large, adjustable installation height (up to 1000 mm) and stroke up to 315 mm.

Made in Switzerland

Máy đột dập tay gạt FUTURO

Constant pressure over the entire stroke; direct force transfer enables sensitive pressing; ram secured against turning; stroke setting via adjusting screw or stop; lever home position adjustable 360°; long, honed, high precision ram guide; adjustable return force. Rack and pinion presses are ideal for press-fitting long parts and for creating long joins.

Appropriate spare parts:
370572 Return spring FUTURO

Made in Germany

Máy đột dập tay gạt MÄDER

with rack, therefore constant pressure over the entire stroke, direct force transfer enables sensitive pressing; ram secured against turning, stroke setting via adjusting screw or stop, lever home position adjustable 360°, long, honed, high precision ram guide.

Made in Germany

Máy đột dập tay gạt MÄDER

Mäder HP 40, classic watchmaker's rack and pinion press. The small, compact design makes it possible to carry out precision work with high tactility and dexterity in the lower force segment. The table hole is aligned with the ram hole to enable the tool to be changed quickly and precisely. This is particularly advantageous for producing small batches or individual components. Infinitely adjustable stroke length and freely positionable hand lever.

Made in Germany

Máy đột dập tay gạt FUTURO

Factory-set pressure point; press head easily height-adjustable; hardened and ground ram; long, honed, high precision ram guide; ground press table.
Toggle presses reach their rated force only at the end of the ram stroke. With the toggle lever mechanism, a relatively low force of about 150 N is enough to produce the high working pressure of the press. For this reason they are used in applications where the full force of the press is only required for a short distance at the end of the stroke, e.g. in component assembly, punching, riveting, embossing, gluing etc.

Appropriate spare parts:
370572 Return spring FUTURO

Made in Germany

Máy đột dập tay gạt MÄDER

For punching, bending, embossing, assembly, pressing, straightening, riveting, bonding; suitable for profiled strips, assembly work, etc.; simple hand operation, precise end position repetition, standard table with fine height adjustment, reading 0.1 mm, height adjustment with quick-action lever. Supplied with support plate and 2 Allen keys.

Designs:
370610.0100 KP 2.1 N -
370610.0200 KP 2.1 N-vario Advantage of type vario: Optimal linear force transfer over the entire stroke, e.g. pressing force 30 kN with 6 mm stroke; punch stroke adjustable.

Appropriate accessories:
371030 Hole punch
371040 Die
371050 Punch sleeve
371060 Stripper
371070 Slot punch
371080 Slot die
371090 Square hole punch
371100 Square die
371110 Tool magazine
371120 Material stop
371140 Radius punch cutter
371160 Band metal shearing tool

Made in Germany

Máy đột dập tay gạt MÄDER

For punching, bending, embossing, assembly, pressing, straightening, riveting, bonding; suitable for sheet metal working; simple hand operation, precise end position repetition, standard table with fine height adjustment, reading 0.1 mm, height adjustment with quick-action lever. Supplied with support plate and 2 Allen keys.

Designs:
370620.0100 KP 2.1 W
370620.0200 KP 2.1 W-vario Advantage of type vario: Optimal linear force transfer over the entire stroke, e.g. pressing force 30 kN with 6 mm stroke; punch stroke adjustable.

Appropriate accessories:
371030 Hole punch
371040 Die
371050 Punch sleeve
371060 Stripper
371070 Slot punch
371080 Slot die
371090 Square hole punch
371100 Square die
371110 Tool magazine
371120 Material stop
371140 Radius punch cutter
371160 Band metal shearing tool

Made in Germany

Máy đột dập dùng khí nén MÄDER

Micro-Press is a pneumatic press for low compressive forces with a stable press stand. Ideally suited for joining and forming applications in which the components require low pressing-in pressure and precise stroke depths, such as applications in micromechanics, electronics manufacturing and medical technology. All presses with precision-guided square ram, adjustable stroke length, height-adjustable press head and virtually maintenance-free cylinder.


Accessories such as two-hand controls and tools on request.

Made in Germany

Máy đột dập dùng khí nén MÄDER

For punching, bending, embossing, assembly, pressing, straightening, riveting, bonding; suitable for profiled strips, assembly work, etc.; standard table with fine height adjustment, reading accuracy to 0.1 mm, with quick-action lever, with integrated stroke limitation. Supplied with die support plate and 3 Allen keys.

Appropriate accessories:
371030 Hole punch
371040 Die
371050 Punch sleeve
371060 Stripper
371070 Slot punch
371080 Slot die
371090 Square hole punch
371100 Square die
371110 Tool magazine
371120 Material stop
371140 Radius punch cutter
371160 Band metal shearing tool


Other models available upon request

Made in Germany

Máy đột dập dùng khí nén MÄDER

Mäder KP 3.1 W, high-quality pneumatic toggle press for punching, bending, stamping, assembling, pressing, aligning, riveting and gluing; suitable for profiles, assembly work, etc.; the height of the standard table can be finely adjusted, 0.1-mm reading, with fast-clamping lever and integrated stroke limiter. Supplied with die support plate and three Allen keys. Pneumatic toggle presses do not reach their nominal force until the end of the stroke, the bottom dead centre. The toggle press mechanism is therefore used to achieve the high working pressure of the press while keeping air requirements to a minimum. Thanks to this low air consumption, pneumatic toggle presses are a cost-effective production tool, both at the time of purchase and over the long term.

Appropriate accessories:
371030 Hole punch
371040 Die
371050 Punch sleeve
371060 Stripper
371070 Slot punch
371080 Slot die
371090 Square hole punch
371100 Square die
371110 Tool magazine
371120 Material stop
371140 Radius punch cutter
371160 Band metal shearing tool


Other models available upon request

Made in Germany