Thùng dụng cụ 8 ngăn FACOM JET.8NM3A

Facom Jet M3A, holding capacity of 3 tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the 4 corners, reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for 8 screwdrivers, which slide into the worktop under heavy loads. Centralised locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 swivelling, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.

Tags: JET8NM3A

Made in France

Thùng dụng cụ FACOM JET.8NM3AS

Facom Jet M3AS, holding capacity of three tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the four corners. Equipped with the Safety Lock System, which prevents several drawers from being opened at the same time, therefore preventing the trolley from falling forwards. Reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for eight screwdrivers. Centralised locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 swivelling, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.

Tool trolley is delivered WITHOUT contents

Tags: JET8NM3AS

Made in France

Thùng dụng cụ 7 ngăn FACOM Jet M4A

Facom Jet M4A with 7 drawers, capacity of 4 tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the 4 corners, reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for 8 screwdrivers, which slide into the worktop under heavy loads. Central locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 steering, 2 fixed, each with a locking brake. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.

Tool trolley is delivered WITHOUT contents

Tags: JET7NM4A, JET7M4A

Made in France

Thùng dụng cụ 6 ngăn FACOM JET.6NM3AS

Facom Jet M3AS, with 6 drawers, capacity of 3 tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the four corners. Featuring the Safety Lock System, which prevents more than one drawer from being opened at the same time, therefore preventing the trolley from falling forwards. Reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for eight screwdrivers. Central locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 steering, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.

Tool trolley is delivered WITHOUT contents

Tags: JET6NM3AS

Made in France

Thùng dụng cụ 6 ngăn GEDORE 1578 SL 6

Empty, hard-wearing sheet steel construction, powder-coated in GEDORIT blue, drawers GEDORIT silver, working platform in ABS with 3 compartments for small parts, handle for pushing, central locking with cylinder lock, 6 drawers which open either side, load capacity per drawer 22 kg, drawers individually partitionable with 6 lengthwise and 2 crosswise dividers included in delivery, with heel protection, high-performance wheels on roller bearings, with 2 fixed castors Ø 140 mm and 2 swivel castors Ø 100 mm, one with total brake.

Tags: 1578SL6

Made in Austria

Thùng dụng cụ 7 ngăn GEDORE Workster Smartline WSL-L7

Gedore Workster Smartline WSL-L7, made from corrosion-resistant sheet steel with a scratch-proof powder coating. Wide drawers, fully extendable with individual pull-out lock, shelf body made from PP plastic with flat section at front, anti-roll safety edge and small additional trays. Good manoeuvrability with handle for easy pushing and steering. Side walls with EURO perforation 10 x 38 mm for attaching hooks and tools. Central locking with cylinder lock, ball-bearing guide rails, can be fitted with lengthways and crossways dividers as required.

Tags: WSLL7

Made in Germany

Thùng đựng dụng cụ 6 ngăn NERIOX

Sturdy steel construction with six drawers, full extension with ball-bearing-mounted guide rails, load capacity per drawer 20 kg, lockable via central locking, drawers with single lock prevents accidental opening, both end faces with square holes, with round push handle, working platform with ribbed rubber mat, vertical continuous plastic edge protection on all four corners, two fixed casters and two swivel casters with locking brakes.
Edge protection made of plastic

Made in Germany

Thùng đựng dụng cụ 6 ngăn NERIOX

Fully equipped with tools in foam inserts, workshop trolley with a sturdy steel construction and 6 drawers, full extension with ball-bearing guide rails, load capacity per drawer 20 kg, lockable via central locking, each drawer has its own lock to prevent accidental opening, both end faces with square holes, with round push handle, working platform with ribbed rubber mat, vertical continuous plastic edge protection on all 4 corners, 2 fixed castors and 2 swivel castors with locking brakes.

Made in Germany

Thùng đựng dụng cụ 6 ngăn NERIOX

Empty, Sturdy steel construction with six drawers, full extension with ball-bearing-mounted guide rails, load capacity per drawer 40 kg, lockable via central locking, drawers with single lock prevents accidental opening, both end faces with square holes, with round push handle, working platform with ribbed rubber mat, vertical continuous plastic edge protection on all four corners, two fixed casters and two swivel casters with locking brakes.

Use with trays:

440346.0100    Screwdriver set module NERIOX     
440345.0100    Combination wrench set module NERIOX     
440344.0100    Combination ratchet wrench set module NERIOX     
440342.0100    Pliers set module NERIOX     
440341.0100    Locking pliers module NERIOX     
440343.0100    Circlip pliers module NERIOX     
440348.0100    Electronic screwdriver set module VDE NERIOX     
440349.0100    Engineer's files module NERIOX     
440350.0100    Hex socket wrench set module 1/2 inch NERIOX     
440351.0100    Hex socket wrench set module 1/4-inch NERIOX     
440352.0100    Workshop kit module NERIOX     
440353.0100    Hex screwdriver set module with lateral drive NERIOX     
440354.0100    Screwdriver set module with lateral drive for TORX® NERIOX     
440355.0100    Chip set module NERIOX     
440356.0100    Locksmith's set module NERIOX     
440347.0100    Screwdriver module for TORX® screws NERIOX     
 

Made in Italy

Thùng đựng dụng cụ 8 ngăn NERIOX

Empty, Sturdy steel construction with six drawers, full extension with ball-bearing-mounted guide rails, load capacity per drawer 20 kg, lockable via central locking, drawers with single lock prevents accidental opening, both end faces with square holes, with round push handle, working platform with ribbed rubber mat, vertical continuous plastic edge protection on all four corners, two fixed casters and two swivel casters with locking brakes.

Use with trays:

440346.0100    Screwdriver set module NERIOX     
440345.0100    Combination wrench set module NERIOX     
440344.0100    Combination ratchet wrench set module NERIOX     
440342.0100    Pliers set module NERIOX     
440341.0100    Locking pliers module NERIOX     
440343.0100    Circlip pliers module NERIOX     
440348.0100    Electronic screwdriver set module VDE NERIOX     
440349.0100    Engineer's files module NERIOX     
440350.0100    Hex socket wrench set module 1/2 inch NERIOX     
440351.0100    Hex socket wrench set module 1/4-inch NERIOX     
440352.0100    Workshop kit module NERIOX     
440353.0100    Hex screwdriver set module with lateral drive NERIOX     
440354.0100    Screwdriver set module with lateral drive for TORX® NERIOX     
440355.0100    Chip set module NERIOX     
440356.0100    Locksmith's set module NERIOX     
440347.0100    Screwdriver module for TORX® screws NERIOX     
 

Made in Italy

Thùng dụng cụ cách điện 113 chi tiết, cách điện 1000V WIHA 44423

Description
Working on automobiles with an electric drive requires special qualifications of the employees as well as safe, certified equipment. With the Workshop trolley set eMobility, the user always has the right tool for the assembly and repair of hybrid and electric vehicles at hand. Compactly accommodated, the workshop trolley always ensures the right tool for the job thanks to a convincing range of high-quality hand tools. The majority of the hand tools offer additional safety when working on live parts thanks to their VDE-certified insulation. Distributed over five drawers, the tools are protected and are clearly arranged in precisely fitting foam inserts. Thanks to the fully extendable drawers, the tools are always easily accessible and can be used quickly. Additional storage space and the integrated 4-way power socket allow the trolley to be expanded individually, even with electrical appliances. A further advantage of the workshop trolley is the mobile working situation thanks to roller runners, which can comfortably transport up to 150 kg of contents within the workshop. At the same time, the locks on the roller runners guarantee absolute stability and steadiness. Thus the workshop trolley can be used flexibly in mobile applications, as a stable work table and as a shelf. From voltage testers to torque wrenches, from protective gloves to warning signs: with the fully equipped workshop trolley, you always have the right Wiha tool at hand.
 

Size
95,0 x 68,0 x 54,0 cm
 

Application
Huge assortment of insulated tools, compiled for work on electrical vehicles.
 

Standards
DIN EN 60900
 

Note
Work on electric vehicles may only be carried out by qualified and authorised specialist personnel.

Made in Germany

Thùng dụng cụ 9 ngăn 233 chi tiết FACOM JET3.CM233GCH

Workship tuck FACOM Jet+3 with 9 drawers and 21 tool modules with 233 tools
- 8 drawers, height 60 mm = 24 modules
- 1 drawer, height 130 mm = 3 ,odules
- supplied with 10 compartments for 60 mm high drawers
- overall dimensions (including rollers and work surface):
length 780 x depth 520 x height 970 mm
- inside dimensions of the drawers:
length 569 x depth 421 x height 60/130 mm
- load per drawer & cubic capacity in litres:
- 60 mm drawer: 20 kg / 15 ltr
- 130 mm drawer: 25 kg / 30 ltr
- static load capacity: 900 kg
- 4 rollers Ø 125 mm: 2 stationary and 2 rotary,
one of these with locking brake
- colour: body in black 9004
21 modules
- socket wrench 1/4” (MOD.R161-26)
- socket wrench 3/8” (MOD.J161-36)
- socket wrench 1/2“ (MOD.S161-46)
- 16 combination wrenches (MOD.440-1XL)
- 12 combination wrenches (MOD.467BJ12)
- 4 large combination wrenches (MOD.440-2)
- 8 Protwist screwdriver (MOD.AT1)
- 7 Protwist Resistorx® screwdriver (MOD.ATXR)
- 8 Protwist screwdriver (MOD.AT2)
- 7 pin spanners with ”T grip” and spherical head (MOD.84TZSA)
- 20 screw bits (MOD.E20L)
- 7 pin spanners TORX® with ”T grip” (MOD.89TXA)
- 2 adjustable pliers (MOD.PR12)
- 3 mechanic's pliers (MOD.CPEA0)
- 4 pliers for circlips (MOD.PCSN)
- 11 pin punches with handle (MOD.CG)
- striking tools (MOD.MI7)
- measuring and testing module (MOD.LIM)
- impact combination wrench 1/2” (MOD.NSI)
- module for screws and small parts (PL.L384)
- 6-angle socket wrench, long (MOD.HLB)
- Attachment parts (7x PL.655 / 2x PL.S384)

Tags: SL.ROLL.6GM3PB

Made in France

Thùng dụng cụ 6 ngăn FACOM SL.ROLL.6GM3PB

FACOM SL.ROLL.6GM3PB Workshop roller cabinet with 6 drawers and 9 hard shell modules including tools

Drawers:

- 3 drawers 60 mm high
- 2 drawers 130 mm high
- 1 drawer 200 mm high

Internal dimensions of drawers
L x D x H: 569 x 421 x 60 / 130 / 200 mm

Containing 9 tool modules:

MOD.S161-36, 1/2" reversible ratchet, hexagon socket spanners and other accessories
MOD.AT1, 8 Protwist screwdrivers
MOD.440-1, 16 combination spanners with OGV® profile
MOD.MI7, impact tools, 7 pieces
MOD.CPEA0, 3 mechanics’ pliers
MOD.44-1, 9 open end spanners
MOD.R161-26, 1/4" reversible ratchet, hexagon socket spanners and other accessories
MOD.PR12, 2 adjustable pliers
MOD.ATX, 7 Protwist screwdrivers, for Torx® screws

Tags: SL.ROLL.6GM3PB

Made in France

Thùng dụng cụ 6 ngăn FACOM SL.ROLL.6GM3M

FACOM SL.ROLL.6GM3M Workshop roller cabinet with 6 drawers and 9 foam modules including tools

Drawers:

- 3 drawers 60 mm high
- 2 drawers 130 mm high
- 1 drawer 200 mm high

Internal dimensions of drawers
L x D x H: 569 x 421 x 60 / 130 / 200 mm

Containing 9 tool modules:

MODM.SL161-36, 1/2" reversible ratchet, hexagon socket spanners and other accessories
MODM.AT1, 8 Protwist screwdrivers
MODM.440-1, 16 combination spanners with OGV® profile
MODM.MI7, impact tools, 7 pieces
MODM.CPEA0, 3 mechanics’ pliers
MODM.44-1, 9 open end spanners
MODM.R161-36, 1/4" reversible ratchet, hexagon socket spanners and other accessories
MODM.PR12, 2 adjustable pliers
MODM.ATXR, 7 Protwist screwdrivers for Torx® screws

Tags: SLROLL6GM3M

Made in France