Kéo cắt tôn trái ERDI

of stainless steel, special hardened, HRc 58, for straight, continuous and pattern cuts, cuts sheet steel up to 1.2 mm, stainless sheet steel up to 0.8 mm, left-hand cutting

Made in Germany

Kéo cắt tôn phải ERDI

Pelican snips of stainless steel, special hardened, HRc 58; for long, straight and continuous cuts, cuts sheet steel up to 1.2 mm, stainless sheet steel up to 0.8 mm; right-hand cutting.

Made in Germany

Kéo cắt tôn phải WISS

Wiss M-7R, american design, outstanding quality, with lever transmission, toothed blades, ergonomic vinyl handles, opening spring, locking lever; right-hand cutting (for right-hand and straight cutting), for sheet steel up to 1.2 mm.

Made in Usa

Kéo cắt tôn phải WISS

Wiss M-2R, american design, outstanding quality, with lever transmission, toothed blades, ergonomic vinyl handles, opening spring, locking lever, right-hand cutting (for tight right-hand to straight cuts), for sheet steel up to 1.2 mm.

Made in Usa

Kéo cắt tôn trái WISS

Wiss M-1R, american design, outstanding quality, with lever transmission, toothed blades, ergonomic vinyl handles, opening spring, locking lever, left-hand cutting (for tight left-hand to straight cuts), for sheet steel up to 1.2 mm.

Made in Usa

Kéo cắt tôn trái WISS

Wiss M-1R, american design, outstanding quality, with lever transmission, toothed blades, ergonomic vinyl handles, opening spring, locking lever, left-hand cutting (for tight left-hand to straight cuts), for sheet steel up to 1.2 mm.

Made in Usa

Kéo cắt tôn phải WISS

Wiss M-2R-Si, american design, outstanding quality, with lever transmission, toothed blades, ergonomic vinyl handles, opening spring, locking lever; for particularly tough materials such as stainless steels and titanium, cutting capacity 1.2 mm, right-hand cutting (for tight right-hand to straight cuts).

Made in Usa

Kéo cắt tôn trái WISS

Wiss M-1R-Si, american design, outstanding quality, with lever transmission, toothed blades, ergonomic vinyl handles, opening spring, locking lever; for particularly tough materials such as stainless steels and titanium, cutting capacity 1.2 mm, left-hand cutting (for tight left-hand to straight cuts).

Made in Usa

Kéo cắt tôn thẳng WISS

Wiss M-3R, american design, outstanding quality, with lever transmission, toothed blades, ergonomic vinyl handles, opening spring, locking lever; for straight cuts (or slight right-hand and left-hand cuts), for sheet steel up to 1.2 mm.

Made in Usa

Kéo cắt tôn phải ERDI

With lever transmission, fine-toothed blades, ergonomic PVC handles, opening spring and locking lever, blades double-hardened, for straight continuous and figure cuts, cuts sheet metal (600 N/mm²) up to 1.2 mm; right-cutting.

Made in Germany

Kéo cắt tôn trái ERDI

With lever transmission, fine-toothed blades, ergonomic PVC handles, opening spring and locking lever, blades double-hardened, for straight continuous and figure cuts, cuts sheet metal (600 N/mm²) up to 1.2 mm; left-cutting.

Made in Germany

Kéo cắt tôn phải ERDI

Optimised lever transmission with 25% less force required, without serration, reduced deformation of the sheet metal, very mobile despite long blade, ergonomic handle. For straight continuous figure cuts; cuts sheet metal (600 N/mm²) up to 1.2 mm, right-cutting.

Made in Germany

Kéo cắt tôn trái ERDI

Optimised lever transmission with 25% less force required, without serration, reduced deformation of the sheet metal, very mobile despite long blade, ergonomic handle. For straight continuous figure cuts; cuts sheet metal (600 N/mm²) up to 1.2 mm, left-cutting.

Made in Germany

Kéo cắt tôn trái ERDI

With double lever transmission for high cutting performance with low force requirement, self-opening, stainless steel cutter head, drop forged and tempered. Blade 75 mm with additional inductive hardening for extra-long cuts, ergonomic PVC handle; cuts sheet metal (600 N/mm²) up to 1.2 mm, left-cutting.

Made in Germany

Kéo cắt tôn phải ERDI

Equipped with HSS blades, particularly wear resistant, up to 15 times longer service life, hardness HRc 64 to 67, for hard sheets, stainless and acid-resistant sheets etc.; cuts sheets (600 N/mm²) up to 1.2 mm; with lever transmission, PVC handles, opening spring and locking lever. Right-cutting.

Also available for left-hand cutting.

Made in Germany

Kéo cắt tôn phải NERIOX 250 mm

Right cutting, excellent quality with forged scissor head. Cutting edge hardness 56-62 HRC, micro-serrated. Ergonomic, hand-friendly 2-component handles, locking lever, for sheet steel up to 1.5 mm, INOX sheet up to 0.9 mm.

Made in Germany

Kéo cắt tôn trái NERIOX 250 mm

Left cutting, excellent quality with forged scissor head. Cutting edge hardness 56-62 HRC, micro-serrated. Ergonomic, hand-friendly 2-component handles, locking lever, for sheet steel up to 1.5 mm, INOX sheet up to 0.9 mm.

Made in Germany

Kéo cắt tôn thẳng NERIOX 250 mm

Straight cutting, excellent quality with forged scissor head. Cutting edge hardness 56-62 HRC, micro-serrated. Ergonomic, hand-friendly 2-component handles, locking lever, for sheet steel up to 1.5 mm, INOX sheet up to 0.9 mm.

Made in Germany

Kéo cắt đai thép FELCO

Felco CP, insulated handle, cuts twine, packing wire, steel bands, etc.

Made in Germany