Eto bàn khoan chính xác cao TRUSCO

Features
As standard equipment, it comes with a V-groove cap (hardness HRC50-55) that is convenient for tightening round and deformed objects, and has excellent holding power.

TAG: PV75, PV100, PV125

Made in Japan

Eto bàn khoan chính xác cao NERIOX

With three face-milled contact surfaces: Normal position, right and front side. Machine different sides without the need for re-clamping. Simple design, cast body, with universal mounting fixture, movable jaw guided laterally, fixed jaw with V-blocks, both clamping jaws with offset.

Made in Germany

Eto bàn khoan chính xác cao NERIOX

Simple design, cast base body, with universal mounting fixture, movable jaw guided laterally, fixed jaw with V-blocks, both clamping jaws with offset.

Made in Germany

Eto máy chính xác NERIOX

Made from tool steel, hardened and ground on all sides, parallelism and squareness 0.005 mm/100 mm, useable on 4 seats. Horizontal and vertical V-block in the movable jaw.

Made in Germany

Eto máy chính xác PFL

fast, precise, powerful, large clamping widths. Rugged main body of cast iron GG 70, support surfaces and guides hardened and ground, clamping screw with ball bearing for maximum clamping forces.
Tolerance ± 0.01 mm.

Appropriate accessories:
310530 Jaws PFL
310535 Accessories PFL


Supplied together with 1 pair of single-step clamping jaws, 2 chuck keys.

Made in Switzerland

Eto máy chính xác ROEHM

modern design of special cast construction. Long design of the movable jaw, spindle protected against fouling and swarf. Clamping jaws reversible, one side smooth, the other with flutes.

Appropriate accessories:
310555 Swivel plate RÖHM


Jaw width 200 mm on request.

Made in Germany

Eto máy chính xác NERIOX

Mechanical clamping system, steel body with hardened and ground guides, low construction, clamping repeatability 0.02 mm, with hold-down jaws.
Slot for T-nut: 20mm

Made in Germany

Eto máy siêu chính xác FRIBOSA, with spindle and V-block

In precision design, system precision 0.005 mm, all relevant surfaces are orthogonal and true to gauge, made of top-rate steel, hardened and ground on all sides, the hold-down system prevents the workpiece from lifting off and firmly secures it in position, no juddering of the workpieces, the spindle with trapezoidal thread can withstand high clamping pressures, suitable for use in drilling, surface grinding, milling, jig boring and in rooms for precision measuring. Horizontal V-block in the movable jaw.

Appropriate accessories:
312180 Crank
312290 Guide flange


Package contents: without clamping lever.

Made in Switzerland

Eto máy chính xác FRIBOSA, with spindle and bore, without V-block

Smooth with bores for holding soft jaws.
In precision design, system precision 0.005 mm, all relevant surfaces are orthogonal and true to gauge, made of top-rate steel, hardened and ground on all sides, the hold-down system prevents the workpiece from lifting off and firmly secures it in position, no juddering of the workpieces, the spindle with trapezoidal thread can withstand high clamping pressures, suitable for use in drilling, surface grinding, milling, jig boring and in rooms for precision measuring.

Appropriate accessories:
312180 Crank
312280 Soft jaw
312290 Guide flange


Package contents: without clamping lever.

Made in Switzerland

Eto máy chính xác FRIBOSA, without spindle with V-block

Precision version without spindle, system accuracy 0.003 mm. The workpiece is clamped using an Allen key (with handle). When the vice is released, the movable jaw is automatically pushed away from the workpiece. The workpiece can be removed without any further intervention (it is not necessary to push the jaw away by hand) Area of application: on all machine tools, but primarily for measuring and monitoring purposes and plunge EDM. Horizontal V-block in the movable jaw.

Appropriate accessories:
312180 Crank
312290 Guide flange


Package contents: With chuck key.

Made in Switzerland

Eto máy chính xác FRIBOSA, without spindle and bore, without V-block

Smooth with bores for holding soft jaws.
Precision version without spindle, system accuracy 0.003 mm. The workpiece is clamped using an Allen key (with handle). When the vice is released, the movable jaw is automatically pushed away from the workpiece. The workpiece can be removed without any further intervention (it is not necessary to push the jaw away by hand) Area of application: on all machine tools, but primarily for measuring and monitoring purposes and plunge EDM.

Appropriate accessories:
312180 Crank
312280 Soft jaw
312290 Guide flange


Package contents: With chuck key.

Made in Switzerland

Eto máy chính xác MAKE

Precision small view for grinding small parts, eroding, for measurement and checking work, etc. Machined from alloyed stainless steel, hardened and fine-ground on all sides, with pull-down effect. Clamping jaws adjustable in stages with quick-action adjustment, automatic engaging.

Made in Germany