Eto máy chính xác FRIBOSA, with spindle and bore, without V-block

Smooth with bores for holding soft jaws.
In precision design, system precision 0.005 mm, all relevant surfaces are orthogonal and true to gauge, made of top-rate steel, hardened and ground on all sides, the hold-down system prevents the workpiece from lifting off and firmly secures it in position, no juddering of the workpieces, the spindle with trapezoidal thread can withstand high clamping pressures, suitable for use in drilling, surface grinding, milling, jig boring and in rooms for precision measuring.

Appropriate accessories:
312180 Crank
312280 Soft jaw
312290 Guide flange


Package contents: without clamping lever.

Made in Switzerland

Eto máy chính xác FRIBOSA, without spindle with V-block

Precision version without spindle, system accuracy 0.003 mm. The workpiece is clamped using an Allen key (with handle). When the vice is released, the movable jaw is automatically pushed away from the workpiece. The workpiece can be removed without any further intervention (it is not necessary to push the jaw away by hand) Area of application: on all machine tools, but primarily for measuring and monitoring purposes and plunge EDM. Horizontal V-block in the movable jaw.

Appropriate accessories:
312180 Crank
312290 Guide flange


Package contents: With chuck key.

Made in Switzerland

Eto máy chính xác FRIBOSA, without spindle and bore, without V-block

Smooth with bores for holding soft jaws.
Precision version without spindle, system accuracy 0.003 mm. The workpiece is clamped using an Allen key (with handle). When the vice is released, the movable jaw is automatically pushed away from the workpiece. The workpiece can be removed without any further intervention (it is not necessary to push the jaw away by hand) Area of application: on all machine tools, but primarily for measuring and monitoring purposes and plunge EDM.

Appropriate accessories:
312180 Crank
312280 Soft jaw
312290 Guide flange


Package contents: With chuck key.

Made in Switzerland