MAKE Việt Nam | Thương hiệu MAKE - GERMANY

Máy đo độ ồn MAKE

Features:
Fast response time
DATA-HOLD function
MAX-HOLD function
Accuracy class 2 according to IEC 651
AC outlet for connecting recorders and boosters
DC outlet with 10 mV/dB for connecting recording metres or data loggers
Frequency range low (Lo) dB(A) 35...100
Frequency range high (Hi) dB(A) 65...130
Operating temperature 0°C...+40°C
Dimensions 245 x 64 x 31 mm

Package contents:
Delivered in pouch.

Made in Eu

Thước thủy nivo điện tử MAKE

For everyday use at the construction site.
Features:
180° rotatable LCD display with directional arrows
Operating range 4 x 90°
Acoustic signals on approaching 0° and 90°
Horizontal/vertical level
Recessed grip and hooks on the ends
Readable in °, %, mm, m, inch, ft
Accuracy of the bubble 0.5 mm/m
Accuracy of digital display: 0° + 90° ±0.1° / 1°... 89° ±0.2°

Made in Germany

Thước thủy nivo điện tử MAKE

Handy and short clinometer that belongs in every tool bag! The flat aluminium legs open on both sides, so that the clinometer can always be applied properly. The flat design also facilitates making a marking line.

Features:
Easy calibration
Zero-setting in any position
HOLD function

Appropriate batteries:
1 pieces 055050.1400 - CR2032 / 3.0 V (included in scope of delivery).

Made in Eu

Thước thủy nivo MAKE

Measure angles quickly and reliably in places that are hard to access, using the clear scale display. The integrated spirit level helps set the vertical reference.

Designs:
074720.0100: Standard
074720.0200: Is also equipped with compass needles, and so can also be used as a building compass (needle out, pencil in).

Made in Switzerland

Thước thủy nivo điện tử MAKE

Measure angles quickly and reliably in awkward places, using the clear digital display. The integrated spirit level helps set the vertical reference.

Features:
LCD display
HOLD function
Zero set of display
Integrated horizontal and vertical bubble
Automatic switchoff

Appropriate batteries:
074740.0050: 2 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).
074740.0100: 4 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).

Made in Germany

Thước thủy nivo điện tử MAKE

Angle measuring instrument, clinometer and digital laser level in a single device.

Features:
Digital display for angle and inclination
The display rotates for overhead work
Angle measurement in degrees
Inclination measurement in degrees or percentage
Signal tone in horizontal/vertical position
Saving of the measured value (HOLD)
Laser spot can be switched on

Angles:
Measuring range 0°...180°
Resolution 0.1°
Accuracy ±0.3°

Inclination:
Measuring range 4 x 90°
Resolution 0.1°
Accuracy 0.2°


Appropriate batteries:
3 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).

Made in Eu

Thước thủy nivo điện tử MAKE

Electronic clinometer with 180° rotating display for comfortable readout in many positions.

Features:
Inclination display in degrees or percent
Display lighting
Signal tones when approaching 0°/90°
Individual 0° position definable
Magnetic housing
Built-in Laser beam
HOLD function
1/4" thread for tripod mounting

Appropriate batteries:
3 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).

Made in Eu

Dao phay rãnh chữ T MAKE

Type N, slim version, staggered-tooth, works standard. Tolerance: b: k11 , HSS-PM, TiAlN coating, angle of twist 12°, angle of cut 12°, cutting tolerance d11, weldon flat (HB), shank tolerance h6, number of teeth 8-14

Made in Hungary

Dao phay bánh răng MAKE

Type N, HSS, pressure angle 20°, form-relieved.
Note
If the gear cutters are used in pairs or multiples, it is recommended that the resulting milled depths are checked after the first milling operation.

Other modules and dimensions on request.

Made in Austria

Lưỡi cưa đĩa HSS MAKE

Type A, HSS, fine teeth with straight back and zero rake, polished surface, hollow-ground, DIN1837A.

Application: For thin-walled workpieces and low cutting depths in brittle materials with short chips.
 

Made in Switzerland

Lưỡi cưa đĩa HSS MAKE

Type B, HSS, coarse, curved teeth, polished surface, hollow-ground, DIN 1838B.

Application: With considerably more chip space and better chip formation, this type can be used for stronger materials and deeper cuts. Also well suited to slot cutting.

Made in Switzerland

Lưỡi cưa đĩa HSS MAKE

(Similar to 118320, but with TiAlN coating.)
Type B, TiAlN, HSS, coarse, curved teeth, polished surface, hollow-ground, DIN 1838B.

Application: With considerably more chip space and better chip formation, this type can be used for stronger materials and deeper cuts. Also well suited to slot cutting.

Made in Switzerland