3M Việt Nam | Thương hiệu 3M - USA

Diamond hand sanding block 3M

Diamond handlap, for grinding and polishing small surfaces and edges. Especially suitable for glass, stone, ceramic, hard metal alloys or similar materials.

Made in Germany

Giấy nhám 3M

3M 261X, Aluminium oxide on a 3 mil (75µ) polyester backing; suitable for work on nearly all materials, especially ferrous and non-ferrous metals, ceramics, carbides, glass, hardened steels, roller bearing steels, heat-resistant steels, superalloys, rubber, plastics or optic fibres. Sheet size 216 x 280 mm

Stock package 50 pcs .

Made in Usa

Giấy nhám mịn 3M, 3M 272L

Aluminium oxide, electrostatically spread on a 5 mil (0.125 mm) polyester backing, resin-over-resin bonded, waterproof, emulsion proof. For work on ferrous and non-ferrous metals, plastics, Plexiglas, paint; for camshafts and crankshafts, valves, rollers, bearings, turbine blades, jewellery, implants, surgical instruments, etc. Where top surface quality is required, while also providing high cutting performance and exceptional finish.

Sheet size 216 x 280 mm

Stock package 20 pcs

Made in United kingdom

Giấy nhám 3M, 3M 314D -382310

Aluminium oxide, highly flexible backing, for metal and wood, especially for shaped and profiled metal workpieces. Sheet size 230 x 280 mm Stock package 25 pcs

Made in Germany

Giấy nhám ướt 3M, 3M 734 -382330

Silicon carbide, water resistant, for use on all materials; especially for wet use on enamel paint. Sheet size 230 x 280 mm Stock package 50 pcs.

Made in Germany

Cuộn giấy nhám tự dính STIKIT, 3M 426U

For sanding wood, metal and paint, with special dust-repellent stearate coating, prevents premature clogging. Integrated into the manual sanding block, the self adhesive sanding paper roll allows efficient usage of the abrasives due to individual determination of the length.

Appropriate accessories: 382390 Hand sanding block STIKIT

Made in Canada

Khối chà nhám tay STIKIT

Ideal for all manual sanding work; the Stikit sanding paper adheres under slight pressure to the surface covered with a tough felt; the ideal shape of the block permits sanding work at very difficult-to-access positions; not including sanding paper roll.

Usable with: 382388 Self-adhesive sanding paper roll STIKIT 3M 426U

Made in France

Giấy nhám 3M, with hook-and-loop fastening, 3M 245 HookitTM

Strips with hook-and-loop fastening, no hole. The open abrasive coating makes it especially suitable for intermediate sanding on wood and metals.

Appropriate accessories: 382399 Hand block for Hookit strips

Made in United kingdom

Giấy nhám 3M, with hook-and-loop fastening, 3M 618 HookitTM

Strips with hook-and-loop fastening, no hole. For sanding between coats and fine sanding after painting. The silicon carbide grit makes them sharp and durable even in very fine grit.

Appropriate accessories: 382399 Hand block for Hookit strips

Made in United kingdom

Tay cầm cho giấy nhám

Usable with: 382395 Abrasive sheets with 3M hook-and-loop fastening 3M 245 HookitTM

382397 Abrasive sheets with 3M hook-and-loop fastening 3M 618 HookitTM

Made in Usa

Khối chà nhám 3M -382410

Coated on 4 sides, with 2 grits, for wet or dry sanding, for sanding work on wood, metal, plastic. The hard emery surfaces are securely bonded to a flexible foam core, making them suitable for sanding down edges, rebates and flat surfaces. Cleaning: rinse under a water tap, allow to dry and re-use.

Made in United kingdom

Cuộn giấy nhám 3M, 3M 314D

Aluminium oxide, highly flexible backing, for work on metal and wood, for all kinds of hand sanding and grinding work. Especially suitable for shaped and profiled metal workpieces.

Roll width x length 25 mm x 25 m

Appropriate accessories:

382640 Economy roll holder sia

Usable with:

382458 Flexible abrasive cloth holder

382460 Corundum cloth holder

Made in Germany

Cuộn nhám không dệt SCOTCH-BRITE

All-purpose non-woven abrasive for cleaning, deburring, finishing and sanding of surfaces; for use by hand, with orbital sander or power drill (with clamping chuck).

Roll width x length 100 mm x 10 m

Made in France

Tây cầm giấy nhám 3M

Plastic, non-woven abrasives adhere reliably to the sanding block; even pressure distribution creates an even and uniform surface.

Usable with:

382510 Non-woven handpads in a roll SCOTCH-BRITE

382520 Abrasive non-woven SCOTCH-BRITE

382531 Non-woven abrasive FUTURO

382710 Non-woven abrasive roll FUTURO

Made in Usa

Đầu kẹp khối nhám 3M

Clamps sections of abrasive non-woven pads and rolls. For cleaning of hard to reach areas, inside pipes, etc., for use on power drills, die grinders or flexible cables.

Usable with:

382510 Non-woven handpads in a roll SCOTCH-BRITE

382520 Abrasive non-woven SCOTCH-BRITE

382531 Non-woven abrasive FUTURO

382710 Non-woven abrasive roll FUTURO

Made in Usa

Chổi làm sạch sợi không dệt SCOTCH-BRITE, 3M PF-ZS

Aluminium oxide abrasive, shaft 6 mm, for use on power drills, die grinders, flexible cables etc. Produces a very even surface with a dense scratch pattern and high shine with low surface roughness. For fine work on flat surfaces and profiles, for cleaning, ideal on stainless steel in pressure vessels and kitchen fittings, for cleaning work in containers and tanks used in the food and beverage industry.

Made in France

Chổi làm sạch sợi không dệt SCOTCH-BRITE, 3M FF-ZS

Abrasives aluminium oxide (A, red), silicon carbide (S, grey), shaft 6 mm; for use on power drills, die grinders, flexible cables etc. Especially for cleaning and finishing work on stainless steel and non-ferrous metals. FF-ZS is a soft, adaptable brush for a fine finish; produces a fine, matt scratch pattern.

Made in Belgium

Chổi làm sạch sợi không dệt SCOTCH-BRITE, 3M CB-ZS

Combination shaft-mounted brush of non-woven material (aluminium oxide A-Fine) and abrasive flaps; shaft 6 mm. Specially designed for surface work on stainless steel (INOX), aluminium, carbon steel and non-ferrous metals. Removes surface defects, makes the scratch pattern uniformly directional; non-woven material reduces the roughness of the scratches. Constant, reproducible work result; no alteration to the shape of the workpiece.

Made in France

Chổi làm sạch sợi không dệt 3M

For finish-machining and satining with high gloss, can be used on either fixed or portable machines, for deburring work, cleaning of workpieces (metal, plastics and wood), in pressure vessel construction, removal of oxide layers, decorative finish on stainless steel and non-ferrous metals; soft, adapts to shaped workpieces, more aggressive cutting performance and longer service life than CF brushes.

Appropriate accessories: 384330 Reducing flange

Made in Germany