3M Việt Nam | Thương hiệu 3M - USA

ROLOC abrasive wheel SCOTCH-BRITE, 3M SC-DR

All-purpose non-woven disc for finishing and cleaning work on stainless steel (INOX), low-carbon steel. Removes rust, old paint, etc., for light deburring work, for refinishing of ground surfaces; requires just one half turn to secure firmly to the ROLOC disc pad

Made in Belgium

ROLOC cleaning brush BRISTLE DISC, 3M RD-ZB

High-performance cleaning brush for use on all kinds of metals, paints, etc. Suitable for all cleaning, finishing and light deburring work. Cast construction with cast-in CubitronTM abrasive grain; no loose bristles or wires. Quick and neat cleaning of tough and thick layers, contaminants on metals, hard plastics, etc. The disc can be used until the bristle...

Made in Usa

Dây đai chà nhám 3M

3M 786F Cubitron II, precision-cut high-performance ceramic abrasive grain with up to 4 times the service life; faster work progress thanks to 50% higher removal rates; identical size and uniform orientation of the abrasive grains allow for a finer surface finish compared to conventional file belts; less material distortion and hardly any discolouration thanks to cooler grinding.

Pack of 10

Usable with: 475585 Compressed air belt file set 3M

Made in Usa

Dây đai chà nhám 3M, 3M 577 F

Highly tear-resistant fabric backing, zirconia alumina abrasive grain, closed abrasive coating, resin-over-resin bonded, grinding aid. All-purpose belt for all steels, for grinding stainless steel (INOX), high-alloy steels, cobalt alloys, plasma welds, etc.

Stock package 10 pcs

Other grains and sizes are available.

Made in Italy

Dây đai chà nhám SCOTCH-BRITE

Scotch-Brite DF-BL, ideal for deburring, matting and finishing of all stainless steel and steel components, as well as removing discolouration. The application of a defined finish on large surface areas and the reduction of the surface roughness are also guaranteed with this non-woven tape. In addition, this tape is used for applications on wood and plastics.

Usable with: 475585 Compressed air belt file set 3M

Made in Usa

Dây đai chà nhám SCOTCH-BRITE, 3M SC-BS

Flexible, grit aluminium oxide (A), silicon carbide (S). For all kinds of mechanised cleaning and finishing work, to create an even satin finish on light metals, chrome steel, brass, copper etc. Cutting speed max. 25 m/sec. Other dimensions on request.

Made in France

Đá cắt 3M CUBITRON II-388210

Type 41, straight version. Experience a new dimension in cutting. The ceramic precision-shaped grain with two active cutting edges enables uncompromised cutting performance, even with little pressure. This cutting disc cuts all kinds of metal effortlessly with minimal formation of burrs and discolouration. Ceramic precision-shaped grain with geometrically designed cutting edges. Controlled and clean cut. Penetrates metal faster, easier and with virtually no burr formation. Significant reduction of frictional heat. Materials: Steel, stainless steel, non-ferrous metals

Made in Poland

Đá mài 3M CUBITRON II-388600

Type 27, offset version. The 3M™ Cubitron™ II 2nd generation roughing disc is the all-rounder for maximum material removal and intensive application on surfaces and edges. Integration of ceramic 3M™ precision grain in the roughing disc makes it possible to achieve maximum performance with reduced effort every time. Patented 3M™ precision grain with geometrically defined cutting edge. Up to three times the removal rate compared to conventional roughing discs. Uncompromised cutting performance, even with little pressure. Immediately cuts into solid material. Significant increase in productivity. Materials: Structural steel, stainless steel, non-ferrous metals.

Made in Austria

Đá mài nhám xếp CUBITRON II, 967A - flat -389020

Flat design; the flap disc is one of the most popular grinding tools in the metalworking industry due to its ergonomics. The 3M™ Cubitron™ II 967A abrasive flap disc allows you to benefit from both the design and sensational performance thanks to 3M™ precision grain. A grinding grain like no other - precision formed, cool grinding and unique ceramic cutting performance thanks to 3M™ precision grain; integrated grinding aid for cooler grinding, particularly on stainless steel; materials: steel, stainless steel, non-ferrous metals

Made in Poland

Đá mài nhám xếp CUBITRON II, 967A- conical -389025

Conical design, precision-moulded, ceramic 3M precision grain and integrated grinding aid for cooler grinding. Suitable for steel, stainless steel and non-ferrous metals.

Made in Poland

Đế lắp đĩa mài 3M-389640

Plastic, ribbed for optimal transfer of high grinding performance, with tightening nut, for clamping fibre discs.

Made in Germany

Đĩa mài sợi hiệu năng cao 3M, 782C-389689

Fibre disc with 3M ceramic precision-shaped grain, suitable for steel, stainless steel and non-ferrous metals. Areas of application: Preparation of weld seams, material removal and surface grinding. Extremely long service life and removal rates, especially for low and medium contact pressure. Uniform roughness, cool grinding, vulcanised fibre pad, 100% synthetic resin bonding.

Made in Usa

Đĩa mài sợi hiệu năng cao 3M 982C Cubitron II -389692

100% ceramic CubitronTM II for steel, tool steel and non-ferrous metals. Applications: Chamfering before welding, for weld seam dressing, grinding off risers on cast parts, removing scale and slag and flame-cut edge clean-up. Uniform roughness, cool grinding, less material distortion.

Made in Usa

Băng dính 3M

SCOTCHPRO 3739, strong polypropylene film, very good adhesion for secure closures, colour: brown

Made in Italy

Dụng cụ cắt băng dính 3M

Professional roller tape dispensers in white metal/plastic, for packing tapes 25 - 50 mm. Gentle on the wrist, with adjustment brake.

Made in Usa

Băng che công nghiệp 3M

3M 301E, crepe paper, temperature-resistant to +90°C (max. 1 hour), colour: beige.

Made in Ireland

Băng dính hai mặt 3M, SCOTCH 9252-457680

Versatile professional carpet-laying tape, for securing carpet and carpet tiles, softener-resistant.

Made in Switzerland

Băng dính 2 hai mặt 3M

ATG adhesive film without backing 924: temperature resistance +85°C, high instant tack, very good UV resistance.

Made in Poland

Băng dính 2 mặt 3M-457690

3M 969, transparent adhesive film made of modified acrylate with very high instant adhesion and good shear force. Suitable for most material surfaces and low-energy surfaces such as PP or PE. For durable and resilient bonding, securing and holding of metals, paints, plastics, paper, wood, cardboard, etc., especially if hoping to achieve very high immediate adhesion. The adhesive film is highly suitable for the self-adhesive mounting of parts owing to easily detachable protective paper with good processing and cutting properties.

Made in Poland