Que hàn BOEHLER-410470

FOX A7-A, electrode for special purposes, core bar alloyed with rutile basic coating for joints between different alloyed and difficult to weld steels and 14% Mn steels. Tough intermediate layers with hard facing. Can be work hardened, crack resistant, thermoshock and scale resistant up to 850° C. Largely invulnerable to embrittlement, tough down to -100° C, supplied in packs of 4.6 - 4.7 kg.

Made in Germany

Que hàn UTP-410500

UTP DUR 600, Hard facing and erosion electrode for universal hard-facing on components of steel, cast steel and Mn hard steel which are subject to wear, pressure and impacts at the same time. The weld metal can only be machined by means of grinding, supplied in packs of 4.0 - 5.9 kg.

Made in Austria

Que hàn BOEHLER-410600

Böhler EML 5, coppered welding rod for welding of non-alloy and low-alloy steels, suitable for thin-walled sheets and pipes as well as for root welds. The relatively low Si content makes the welding rod particularly suitable for welds that subsequently have to be enamelled or zinc plated. Shielding gas: 100% argon. Pack of 5 kg.

Made in Germany

Que hàn BOEHLER-410620

Böhler EAS 2 IG, high-alloy TIG rod, chemically resistant for TIG arc welding of CrNi steels. For similar steels, including high carbon and ferritic 13% chromium steels. IC resistant up to 350°C operating temperature, tough down to -269°C. Shielding gas: 100% argon. Pack of 5 kg.

Made in Germany

Que hàn BOEHLER-410640

Böhler CN 23 / 12-IG, with increased ferrite content (FN ~16) in weld metal for combination of and between high-strength, non-alloy and alloy tempered steels, stainless, ferritic Cr and austenitic CrNi steels, Mn hard steels. Very good welding and flowing properties, approved for operating temperatures up to 300° C. Shielding gas: 100% argon. Pack of 5 kg.

Made in Germany

Que hàn THYSSEN-410680

T-PUT UNION Al Mg 5, Aluminium welding filler for TIG welding of Al-Mg alloys. Shielding gas: 100% argon. In 5 kg pack.

Made in Germany

Dây hàn MIG-MAG BOEHLER-410811

Böhler Union SG 3-H, non-alloy, coppered wire electrode for welding of non-alloy steels with higher strength requirements. Shielding gas (EN ISO 14175) M2, M3, C1, preferentially Argon + 18 % Co2.

Made in Italy

Dây hàn MIG-MAG BOEHLER-410830

Böhler EAS 2-IG Si, high-alloy, chemically resistant solid wire for arc welding of CrNi steels. For similar steels and ferritic 13% chromium steels. Outstanding sliding capacity and feed characteristics. IC resistant up to 350°C operating temperature, tough down to -196°C. Shielding gas: argon + max. 2.5% Co2.

Made in Germany

Dây hàn MIG-MAG THYSSEN-410890

T-PUT UNION Al Mg 5, Aluminium welding filler for MIG welding of Al-Mg alloys. Shielding gas: 100% argon.

Made in Germany

Bộ dây & kìm kẹp mát TRUSCO

Features
Because it uses elastic and tough natural rubber, it is resistant to impact and wear, and has excellent withstand voltage characteristics.
Use
As a secondary cable (for grounding) of an arc welder.

tag: TCT2205KE, TCT2210KE, TCT3805KE, TCT3810KE

Made in Japan

Bộ dây & kìm hàn TRUSCO

Features
Because it uses elastic and tough natural rubber, it is resistant to impact and wear, and has excellent withstand voltage characteristics.
Use
As a secondary cable (welding side) of an arc welder.

tag: TCT2205KH, TCT2210KH, TCT3805KH, TCT3810KH

Made in Japan