Máy siết bulong khí nén

Máy siết bulong khí nén 3/8 inch HAZET 9011M

Maximum loosening torque: 461 Nm

Extremely compact construction enables working in areas with restricted access

One-hand operation for right and left handed operators

Exhaust air is guided through the handle downwards

Reduced vibrations

Easy handling

Extra short – only 92 mm

Single hammer striking mechanism


GERMANY

Made in Germany

Mã & tên hàng ModelĐầu vặnLực siết max (N.m) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
9011M3/8 inch461
PCE

Máy siết bulong khí nén HAZET

360° adjustable exhaust, completely enclosed head prevents the entry of swarf, etc. Cold-insulated handle, clockwise/anti-clockwise rotation. Must be operated with oiled air. Supplied with plug-in nipple to European standard (Cejn 320).

Designs:
9020P-2: for hand retightening with torques > 60 Nm
9021P-2: for hand retightening with torques > 260 Nm
9022P-2: for hand retightening with torques > 400 Nm

Appropriate accessories:
479600 Swivel joint VARIACOR®, 770000 Service unit CEJN, 770005 Service unit CEJN


GERMANY

Made in Germany

Mã & tên hàng ModelĐầu vặnLực siết max (N.m) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
9021P-23/8 inch54
PCE

Máy siết bulong khí nén tay ngang FUTURO

Universal tool for efficient screw assembly, also for work in hard-to-reach areas; adjustable for clockwise/anticlockwise operation. Cold-insulated soft handle, air exhaust and air supply connection can be rotated 360°. Must be operated with oiled air.
Appropriate accessories:
770000 Service unit CEJN, 770005 Service unit CEJN


GERMANY

Made in Germany

Mã & tên hàng ModelĐầu vặnLực siết max (N.m) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
21013/8 inch120
PCE

Máy siết bulong khí nén tay ngang BAHCO

Designs:
477260.0100 BP700: extremely compact mini-ratchet, composite housing, force control. Must be operated with oiled air
477260.0200 BP820: low-vibration, rubber handle, speed control, air exhaust and air supply connection can be rotated. Must be operated with oiled air

Appropriate accessories:
770000 Service unit CEJN, 770005 Service unit CEJN


SWEDEN

Made in Sweden

Mã & tên hàng ModelĐầu vặnLực siết max (N.m) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
BP8203/8 inch67
SET

Máy siết bulong khí nén MANNESMANN DEMAG-477350

good power-to-weight ratio and minimal return torque, powerful, balanced impact, thanks to impact strength control, versatile uses, long-lived industrial quality, maintenance-friendly. 4 throttle stages, air exhaust through the handle; not oil-free. Supplied with percussion fat and oil bottle.


GERMANY

Made in Germany

Mã & tên hàng ModelĐầu vặnLực siết max (N.m) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
E 10 P33/8 inch140
PCE

Máy siết bulong khí nén BOSCH-477470

with automatic cut-off. Extremely light impulse driver with CLEAN technology, oil-free. Ergonomic, fibre-reinforced polyamide housing for optimal handling, optimised cooling, high speed thanks to rugged, high-performance motor with double chamber, wear-free shut-off clutch, which reacts to mechanical centrifugal force. Clockwise / counterclockwise operation, largest torque in counterclockwise operation, to make loosening of screws easy. Torque of the impulse driver can be adjusted from the outside. Supplied with suspension loop, hexagonal recess and hose nipple.


GERMANY

Made in Germany

Mã & tên hàng ModelĐầu vặnLực siết max (N.m) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
5053/8 inch13...35
PCE

Máy siết bulong khí nén CLECO-477475

with torque determining, highly precise shut-off with a tolerance in the range of +/- 10% for Six Sigma. Reduced amount of maintenance required minimises downtimes: The new Cleco H series makes up to 500,000 tightening cycles possible prior to the first servicing. 50% less air consumption when idling on account of the innovative flyweight governor that enables full load output only under load; the powerful 3-chamber air motor reduces your tightening time thanks to boosted motor torque. The reserve oil continues flowing automatically, with integrated fill level indicator. Filling the reserve tank can be accomplished in a few seconds during the course of maintenance. Q-types with quick-change chuck. Air connection from the bottom.


GERMANY

Made in Germany

Mã & tên hàng ModelĐầu vặnLực siết max (N.m) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20PTHH4033/8 inch10...20
PCE
35PTHH4033/8 inch20...35
PCE
55PTHH4033/8 inch30...55
PCE

Xem thêm >>


Máy siết bulong khí nén CLECO-477476

with torque determining, highly precise shut-off with a tolerance in the range of +/- 10% for Six Sigma. Reduced amount of maintenance required minimises downtimes: The new Cleco H series makes up to 500,000 tightening cycles possible prior to the first servicing. 50% less air consumption when idling on account of the innovative flyweight governor that enables full load output only under load; the powerful 3-chamber air motor reduces your tightening time thanks to boosted motor torque. The reserve oil continues flowing automatically, with integrated fill level indicator. Filling the reserve tank can be accomplished in a few seconds during the course of maintenance. Q-types with quick-change chuck. Air connection from the top.


GERMANY

Made in Germany

Mã & tên hàng ModelĐầu vặnLực siết max (N.m) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20PTHHA4033/8 inch10…20
PCE
35PTHHA4033/8 inch20…35
PCE
55PTHHA4033/8 inch30…55
PCE

Xem thêm >>