Máy siết bulong khí nén 3/8 inch HAZET 9011M

Maximum loosening torque: 461 Nm

Extremely compact construction enables working in areas with restricted access

One-hand operation for right and left handed operators

Exhaust air is guided through the handle downwards

Reduced vibrations

Easy handling

Extra short – only 92 mm

Single hammer striking mechanism

Made in Germany

Máy siết bulong khí nén HAZET

360° adjustable exhaust, completely enclosed head prevents the entry of swarf, etc. Cold-insulated handle, clockwise/anti-clockwise rotation. Must be operated with oiled air. Supplied with plug-in nipple to European standard (Cejn 320).

Designs:
9020P-2: for hand retightening with torques > 60 Nm
9021P-2: for hand retightening with torques > 260 Nm
9022P-2: for hand retightening with torques > 400 Nm

Appropriate accessories:
479600 Swivel joint VARIACOR^®, 770000 Service unit CEJN, 770005 Service unit CEJN

Made in Germany

Máy siết bulong khí nén HAZET 9022-360

HAZET 9022-360, high-performance ratchet screwdriver suitable for cramped conditions, 30% quieter thanks to the ability to reduce the running noise using a selection switch. Suitable for manual tightening at a maximum torque of 500 Nm, extremely flat head with no protruding edges thanks to the switchover lever, release trigger can be rotated 360°, adjusting ring on the handle can be used to switch between clockwise and anti-clockwise, head made of heat-treated special steel, cold-insulating handle.

Appropriate accessories:
479600 Swivel joint VARIACOR^®
479605 Mini oiler HAZET

Made in Germany

Máy siết bulong khí nén HAZET 9022P-XLG

HAZET 9022P-XLG, extra-long, slim ratchet screwdriver for obstructed and hard-to-reach areas. Can withstand high manual tightening forces up to 400 Nm, low vibration, particularly suitable for applications such as assembling and disassembling chain cases, cold-insulating handle.

Appropriate accessories:
479600 Swivel joint VARIACOR^®
479605 Mini oiler HAZET

Made in Germany

Máy siết bulong khí nén HAZET 9022SR-1

HAZET 9022SR-1, 30% higher torque and approx. 3x higher speeds than standard devices. Maximum safety at work thanks to a response-free striking mechanism, easy on the joints, suitable for manual tightening at a maximum torque of 270 Nm. High-performance pin striking mechanism, clockwise and anti-clockwise rotation, cold-insulating handle.

Made in Germany

Máy siết bulong khí nén tay ngang FUTURO

Universal tool for efficient screw assembly, also for work in hard-to-reach areas; adjustable for clockwise/anticlockwise operation. Cold-insulated soft handle, air exhaust and air supply connection can be rotated 360°. Must be operated with oiled air.
Appropriate accessories:
770000 Service unit CEJN, 770005 Service unit CEJN

Made in Germany

Máy siết bulong khí nén tay ngang BAHCO

Designs:
477260.0100 BP700: extremely compact mini-ratchet, composite housing, force control. Must be operated with oiled air
477260.0200 BP820: low-vibration, rubber handle, speed control, air exhaust and air supply connection can be rotated. Must be operated with oiled air

Appropriate accessories:
770000 Service unit CEJN, 770005 Service unit CEJN

Made in Sweden

Máy siết bulong khí nén thân gập thông minh HAZET 9012 ATT

HAZET 9012 ATT, extremely slim pneumatic impact driver with high-performance double-hammer impact mechanism. Handle/trigger adjustable around its own axis for optimum handling — allows actuation in any position. Innovative swivel mechanism for a broader range of applications guarantees excellent access to hard-to-reach places, such as when actuating calliper fittings. Cold-insulating handle, one-hand operation for right- and left-handed users. Low vibration, easy to operate, ergonomic shape.
Appropriate accessories:
479600 Swivel joint VARIACOR^®
479605 Mini oiler HAZET

Made in Germany

Máy siết bulong khí nén MANNESMANN DEMAG-477350

good power-to-weight ratio and minimal return torque, powerful, balanced impact, thanks to impact strength control, versatile uses, long-lived industrial quality, maintenance-friendly. 4 throttle stages, air exhaust through the handle; not oil-free. Supplied with percussion fat and oil bottle.

Made in Germany

Máy siết bulong khí nén BOSCH-477470

with automatic cut-off. Extremely light impulse driver with CLEAN technology, oil-free. Ergonomic, fibre-reinforced polyamide housing for optimal handling, optimised cooling, high speed thanks to rugged, high-performance motor with double chamber, wear-free shut-off clutch, which reacts to mechanical centrifugal force. Clockwise / counterclockwise operation, largest torque in counterclockwise operation, to make loosening of screws easy. Torque of the impulse driver can be adjusted from the outside. Supplied with suspension loop, hexagonal recess and hose nipple.

Made in Germany

Máy siết bulong khí nén CLECO-477475

with torque determining, highly precise shut-off with a tolerance in the range of +/- 10% for Six Sigma. Reduced amount of maintenance required minimises downtimes: The new Cleco H series makes up to 500,000 tightening cycles possible prior to the first servicing. 50% less air consumption when idling on account of the innovative flyweight governor that enables full load output only under load; the powerful 3-chamber air motor reduces your tightening time thanks to boosted motor torque. The reserve oil continues flowing automatically, with integrated fill level indicator. Filling the reserve tank can be accomplished in a few seconds during the course of maintenance. Q-types with quick-change chuck. Air connection from the bottom.

Made in Germany

Máy siết bulong khí nén CLECO-477476

with torque determining, highly precise shut-off with a tolerance in the range of +/- 10% for Six Sigma. Reduced amount of maintenance required minimises downtimes: The new Cleco H series makes up to 500,000 tightening cycles possible prior to the first servicing. 50% less air consumption when idling on account of the innovative flyweight governor that enables full load output only under load; the powerful 3-chamber air motor reduces your tightening time thanks to boosted motor torque. The reserve oil continues flowing automatically, with integrated fill level indicator. Filling the reserve tank can be accomplished in a few seconds during the course of maintenance. Q-types with quick-change chuck. Air connection from the top.

Made in Germany