Cờ lê đóng đầu vòng WGB

DIN 7444, special steel, phosphated up to 100 mm, steel grey from 105 mm.


Larger sizes available upon request.

Made in Germany

Tròng tự động STAHLWILLE 25

Stahlwille 25, with double hex, flat, chrome-plated.

Made in Germany

Tròng tự động STAHLWILLE 25aN, imperial

Stahlwille 25aN, imperial, with double hex, straight, in all-steel construction, Fed. Spec. GGG-W-001405.

Made in Germany

Bộ cờ lê tự động 2 đầu tròng STAHLWILLE

Stahlwille 25, with double hex, flat, chrome-plated, in plastic bag.

Made in Germany

Bộ cờ lê tự động STAHLWILLE 17/5 - 17/12

STAHLWILLE 17, reversible, with double hex, 72 teeth, for working in the tightest spaces, with working angle of only 5°, curved ring side 15°, chrome alloy steel, chrome plated, in roll-up case with Velcro fastener made of extremely wear-resistant textile material.

Made in Germany

Tròng tự động MAKE

Chrome-vanadium steel, chrome-plated, satined. Sturdy ratchet with 72 teeth, reversible. 12-point rings offset 75°, with Flank Traction profile.

Made in Germany

Tròng tự động MAKE

Chrome-vanadium steel, high-gloss chrome plated, flat form. Sturdy ratchet with 72 teeth, not reversible, 12-point rings with Flank Traction profile. Right/left reversing by turning the wrench over.
Other sizes and inch sizes available upon request.

Made in Germany

Cờ lê tự động FACOM-322235

Facom 64, Được làm từ thép mạ chrome thiết kế cấu tạo nhỏ gọn có thể đảo chiều

Made in France

Cờ lê tự động FACOM

Facom 64, Được làm từ thép mạ chrome thiết kế cấu tạo nhỏ gọn có thể đảo chiều

Made in France

Bộ cờ lê tự động đảo chiều 4 trong 1 BAHCO

In chrome-vanadium steel, chrome-plated. 4 wrenches in 1, Dynamic Drive Profile, straight shape, reversible, 5° ratcheting arc, in practical belt carrying case.

Appropriate spare parts:
322240 4-in-1 ratchet ring wrench BAHCO

Made in Germany

Cờ lê đóng đầu vòng hệ inch GEDORE 306 (AF)

Special sizes available on request up to 250 mm
Up to length 435 mm made of chrome vanadium steel 31CrV3, from length 480 mm made of material C35
Acc. to DIN 7444
 

Material: 31CrV3
Standard: DIN 7444
Surface: Oiled

Made in Germany

Cờ lê đầu mở GEDORE, No.6

DIN 3110 Vanadium Stahl 31CrV3

Meticulously forged, precisely ground to the exact nominal dimension, high bending stiffness, safe grip due to slim profile shaft, glare-free, chrome-plated flat heads, suitable for hard, continuous stress.
other measure combinations available on request.

Made in Germany

Bộ cờ lê GEDORE DIN 3110

Meticulously forged, precisely ground to the exact nominal dimension, high bending stiffness, safe grip due to slim profile shaft, glare-free, chrome-plated flat heads, suitable for hard, continuous stress, practical configurations.
other set configurations available on request

Made in Germany

Cờ lê vòng miệng GEDORE, No.7

DIN 3113A Vanadium Stahl 31CrV3

Meticulously forged, slim profile shaft for safe grip, jaw side precisely ground to the exact nominal dimension, ring bent 15°, with UD-profile for gentle transmission of force, glare-free appearance due to chrome-plating, suitable for hard, continuous stress.
other wrench dimensions available on request

Made in Germany

Bộ cờ lê vòng miệng GEDORE

Vanadium Stahl 31CrV3

practical configurations of individual wrench no. 932005 in sets, version as presented.

Made in Germany

Cờ lê vòng miệng GEDORE DIN 3113B

DIN 3113B Vanadium Stahl 31CrV3

Meticulously forged, with rib reinforced slim shaft, jaw side precisely ground to the exact nominal dimension, ring cranked and bent 10°, with UD-profile for gentle transmission of force, glare-free appearance due to chrome-plating, suitable for hard, continuous stress.
other dimensions available upon request.

Made in Germany

Cờ lê tự động GEDORE, No.7R

Vanadium Stahl 31CrV3

flat version with equal wrench sizes, with UD-profile for gentle transmission of force, easy-to-grasp haptics due to hollow-profile shaft, glare-free appearance due to chrome-plating, forged with precise grounding of the wrench size.
Wrench with inches available on request.

Made in Germany

Cờ lê tự động đảo chiều GEDORE NO.7UR

Vanadium Stahl 31CrV3

with equal wrench sizes, ring side 13° bent, reversible, with UD-profile for gentle transmission of force, easy-to-grasp haptics due to hollow-profile shaft, glare-free appearance due to chrome-plating, forged with precise grounding of the wrench size.
other dimensions available upon request.

Made in Germany

Bộ cờ lê tự động GEDORE

Vanadium Stahl 31CrV3

practical configurations of individual wrench no. 932020-932022 in sets, versions as described.

Content 5 pieces set: 8, 10, 13, 17, 19 in plastic box
Content 12 pieces set: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 in sheet metal box

Made in Germany