Cờ lê lực

Cờ lê cân lực NORBAR

Norbar Professional, automatic clicking torque wrench for controlled clockwise tightening. With compact ratchet wrench, a clearly legible scale in Nm and lbf/in with extremely high resolution. Quick and easy adjustment. Intuitive adjuster lock with visual marking. Ergonomically shaped 2-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in automotive, aviation and industrial environments. +/- 3% accuracy, exceeds all international standards for torque wrenches. Each wrench is supplied with a calibration certificate according to DIN EN ISO 6789-2:2017, incl. recalibration reminder by means of TimeStrip® (= reg. trademark of TimeStrip UK Ltd.).



Linh kiện thay thế
331105 Ratchet spare part set NORBAR


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1003/8"367
PCE
20...1001/2"367
PCE
40...2001/2"466
PCE

Xem thêm >>


Cờ lê cân lực GEDORE-331123

Gedore Torque ATB, with Micrometer scale for presetting and permanently mounted reversible ratchet, adjustment guard to prevent unintentional adjustment of the torque value, on attaining the torque value handle bends up to 20°, makes overtorquing impossible. Release accuracy ± 4%, classified according to DIN EN ISO 6789:2003 type 2 class A, with factory test certificate


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2"400
PCE

Cờ lê cân lực NORBAR-331140

Norbar Professional, actuation with audible "click" signal, with fine-toothed ratchet for working angle of only 6°, for clockwise and anti-clockwise tightening, large scale length makes it easier to adjust, tightening length independent - it can be used with an extension handle, low weight, accuracy of ±3% from the measured value, in accordance with DIN/ISO 6789, with calibration certificate according to DIN EN ISO 6789-2:2017 and extension handle 500 mm.


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
500...15001 inch1570
PCE

Cờ lê cân lực FACOM 209 PB

Facom 209 PB, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with fixed reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube


ITALY

Made in Italy

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2 inch396
PCE
40...2001/2 inch466
PCE
40...2001/2 inch618
PCE

Xem thêm >>


Cờ lê cân lực STAHLWILLE 730NR

Stahlwille 730 NR, with reversible insert ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

 

Đầu vặn đã gắn kèm sản phẩm

Có thể thay bằng các đầu vặn khác:


331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE


Linh kiện gốc:
331600 Ratchet insert STAHLWILLE


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

331171.0200

Cờ lê cân lực STAHLWILLE 20...100 N.m

Phụ kiện, sản phẩm liên quan

20...1001/2 & 9 x 12 mm420
PCE

331171.0400

Cờ lê cân lực STAHLWILLE 40...200 N.m

Phụ kiện, sản phẩm liên quan

40...2001/2 & 14 x 18 mm510
PCE

331171.0600

Cờ lê cân lực STAHLWILLE 130...650 N.m

Phụ kiện, sản phẩm liên quan

130...6503/4 & 14 x 18 mm945
PCE

Xem thêm >>


Cờ lê cân lực đầu tháo rời thay thế STAHLWILLE 730 N

Stahlwille 730 N, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

 

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:


331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

 

tag: 730n


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

331175.0200

Cờ lê cân lực STAHLWILLE 20...100 N.m

Phụ kiện, sản phẩm liên quan

20...1009 x 12 mm386
PCE

331175.0400

Cờ lê cân lực STAHLWILLE 40...200 N.m

Phụ kiện, sản phẩm liên quan

40...20014 x 18 mm467
PCE

331175.0600

Cờ lê cân lực STAHLWILLE 130...650 N.m

Phụ kiện, sản phẩm liên quan

130...65014 x 18 mm890
PCE

331175.0650

Cờ lê cân lực STAHLWILLE 130...650 N.m

Phụ kiện, sản phẩm liên quan

130...65022 x 28 mm911
PCE

Xem thêm >>


Cờ lê cân lực STAHLWILLE 730R

Stahlwille 730 R, with reversible adapter ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers, accuracy ±4% according to DIN/ISO 6789, with factory test certificate, rugged construction, quick setting of torque with slide and locking button.

 

Đầu vặn Đàbao gồm

Có thể dùng đầu vặn khác thay thế:


331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

 

Link kiện gốc:

331600 Ratchet insert STAHLWILLE


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

331181.0400

Cờ lê cân lực STAHLWILLE 20...100 N.m

Phụ kiện, sản phẩm liên quan

20...1001/2 & 9 x 12 mm405
PCE

331181.0600

Cờ lê cân lực STAHLWILLE 40...200 N.m

Phụ kiện, sản phẩm liên quan

40...2001/2 & 14 x 18 mm497
PCE

331181.0750

Cờ lê cân lực STAHLWILLE 130...650 N.m

Phụ kiện, sản phẩm liên quan

130...6503/4 & 14 x 18 mm925
PCE

Xem thêm >>


Cờ lê cân lực STAHLWILLE 730, 730Quick

Stahlwille 730, for clockwise and counter-clockwise tightening. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.
Stahlwille 730 Quick, for clockwise and counter-clockwise tightening. More ergonomic and with increased comfort; improved access and operation of the clamping lever recessed in the handle. Optimised ball handle for fatigue-free work. The new design with opposite, V-shaped mounts and integrated magnifier allows settings to be adjusted quickly and accurately - even from an awkward angle. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.

 

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

 

 

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng

331182.0410

Cờ lê cân lực STAHLWILLE 20...100 N.m

Phụ kiện, sản phẩm liên quan

20...1009 x 12 mm370
PCE

331182.0610

Cờ lê cân lực STAHLWILLE 40...200 N.m

Phụ kiện, sản phẩm liên quan

40...20014 x 18 mm455
PCE

331182.0810

Cờ lê cân lực STAHLWILLE 130...650 N.m

Phụ kiện, sản phẩm liên quan

130...65014 x 18 mm875
PCE

Xem thêm >>


Cờ lê cân lực STAHLWILLE 730 FIX

Stahlwille 730 Fix, for series production tasks; the adjusting knob can be removed after the torque has been set, preventing inadvertent changes to the settings. The Torx® tamper-resistant screw also protects against unwanted manipulation, just like the enclosed adhesive seal; settings cannot be adjusted without breaking the seal. For clockwise and counter-clockwise tightening by turning over the insert tools. Robust design, rapid adjustment of torque with QuickSelect; the torque is set and then locked by pulling out the adjusting knob and turning it. Two-component handle with ergonomic green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol). A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached; accuracy ±3% in accordance with DIN 6789. No need for manual reset to zero, since the measuring element is only under load while force is being applied. Supplied with factory certificate, Torx® tamper-resistant screw and adhesive seal. Without insert tool.

 

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:


331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1009 x 12 mm386
PCE
40...20014 x 18 mm467
PCE
130...65014 x 18 mm890
PCE
130...65022 x 28 mm911
PCE

Xem thêm >>


Cờ lê cân lực FUTURO

For controlled clockwise and anti-clockwise tightening, robust ratchet with push-through square, automatic actuation with audible signal. Double micrometer scale Nm and lbf/ft allows for exact, error-free setting. Quick adjustment, ergonomic 2-component handle, accuracy of ±3% from measured value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2"375
PCE
40...2001/2"460
PCE

Cờ lê cân lực NERIOX

Automatically triggering torque wrench for controlled right-hand tightening, error-free and accurate torque pre-setting via easy-to-read laser scale, with audible and tactile signal when the pre-set torque is reached. Reversible ratchet and robust metal handle. High accuracy of the measured value according to DIN/ISO 6789-1:2017, with factory test certificate and plastic case.


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2 inch410
PCE
40...2001/2 inch520
PCE

Cờ lê cân lực HAZET

Hazet 6000-1 CT± 2% release accuracy of the scale value, highly precise premium measuring instruments for the heaviest demands. Robust and wear-resistant hard-chrome-plated steel tube construction in slimline design, in safe box with display. Safety locking of the handle, adjusting knob for collateral locking of the calibration, user-friendly reversible ratchet, service-friendly, integrated shift lever, adjustment of the torque value desired easily and safely by turning the handle, ergonomically shaped handle with collar reduces the risk of slipping or injury, precise, fine scale graduation.


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
40...2001/2\"543
PCE

Cờ lê cân lực HAZET 5000-3 CT

HAZET 5000-3 CT, designed for harsh workshop use, for controlled fastening with haptic and acoustic feedback. Wide range of applications for controlled fastening in tyre service, two-wheel, car and lorry applications, as well as various applications in industry and trade. Accuracy ± 3% of scale value, secure locking of set value by latching function on slewing ring, handle with more grip for easier power transmission. Tested in accordance with DIN EN ISO 6789-2:2017 with factory test certificate. Insertion tool not included.
 

tag: 50003ct


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
40...20014 x 18484
PCE

Cờ lê cân lực HAZET

Hazet 6200-1 CT, with plug-and-socket to accommodate insert tools, accuracy ± 2% of the scale value, in safe box.
Adapter tools NOT included.

Appropriate accessories:
331602 Ratchet insert STAHLWILLE 725QR
331605 Ratchet insert HAZET
331606 Ratchet insert HAZET
331608 Ratchet insert HAZET
331612 Ratchet insert HAZET
331615 Ratchet ring insert HAZET
331617 Ratchet insert for bits HAZET
331625 Open end insert HAZET
331626 Open end insert HAZET
331639 Open box insert HAZET
331645 Box insert HAZET
331652 Box insert HAZET
331675 Square insert HAZET 6414 / 6416
331681 Welding insert HAZET
331685 Insert adapter HAZET


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
40...20014 x 18 mm510
PCE

Cờ lê cân lực NORBAR

NORBAR Professional, automatic torque wrench for controlled clockwise and anti-clockwise tightening, with plug connection for mounting insert tools. +/- 3% accuracy, exceeds all international standards for torque wrenches. Every wrench is supplied with a calibration certificate in accordance with DIN EN ISO 6789-2:2017, which also meets the requirements of ISO 9000:2000. Includes recalibration memory by TimeStrip® (= reg. trademark of TimeStrip UK Ltd.). Clear scale with extremely high resolution. Intuitive adjuster lock with visual marking. Ergonomically shaped two-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in the automotive, aviation and industrial environments.
Supplied without insert tool.

 

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:


331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1009 x 12 mm365
PCE
40...2009 x 12 mm442
PCE
40...20014 x 18 mm452
PCE

Xem thêm >>


Cờ lê cân lực BAHCO

Bahco 7455accuracy ± 4% from the scale value, suitable for use clockwise and anti-clockwise, acoustic and tactile signal when the torque is reached. Completely made of metal with mechanics closed to the outside, non-slip grip, resistant to vibrations and all common chemicals. Fixed mounted ratchet with switchover lever, tested according to DIN EN ISO 6789-2:2017 with factory test certificate.


SWEDEN

Made in Sweden

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1003/8400
PCE
20...1001/2414
PCE

Cờ lê cân lực FACOM 209 A

Facom 209 A, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with replaceable reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.


ITALY

Made in Italy

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2 & 9 x 12 mm396
PCE
40...2001/2 & 14 x 18 mm466
PCE

Cờ lê cân lực FACOM 306

Facom 306, automatic wrench slip with audible signal, precision scale for presetting, receptacle for interchangeable adapter tools. Scope of delivery: reversible ratchet insert, factory test certificate.

Designs:
1...5 Nm...5...25 Nm: Accuracy ±4 % of the scale value
20...100 Nm...70...350 Nm: Accuracy ±2 % of the scale value


Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE


ITALY

Made in Italy

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1009x12 mm & 1/2"437
PCE
40...20014x18 mm & 1/2"515
PCE

Cờ lê cân lực FACOM 209 D

Facom 209 D, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, without reversible ratchetaccuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.


ITALY

Made in Italy

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1009 x 12 mm396
PCE
40...20014 x 18 mm466
PCE

Cờ lê cân lực FACOM

Facom 306.MF, with swivel head, automatic actuation with audible and tactile signal, tried-and-tested mechanism with long durability, fine-tooth reversible ratchet with 75 teeth and 5° readjustment angle for clockwise tightening, accuracy of ±4% from the measured value in accordance with DIN/ISO 6789, with factory testing certificate and plastic case.


ITALY

Made in Italy

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1003/8"395
PCE

Cờ lê cân lực GEDORE

Gedore DREMASTER® K, adjustable, clicking and rugged pipe torque wrench with integrated ratchet with square drive for industrial applications and the trade sector. Rugged, painted steel pipe construction, with galvanised ratchet and high-quality plastic parts, dual scale in Nm and lbf/ft, for controlled clockwise and anti-clockwise tightening, classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard. Quick adjustment due to offset driver (not included in scope of delivery), release system triggers a clear tactile and audible signal.

Designs:
DMK 100...DMK 300: Interchangeable mushroom head with push-button release and ball locking device
DMK 400...DMK 850: Push-through square drive with pin locking device

 

tag: DMK100, DMK200, DMK300, DMK400, DMK550, DMK750, DMK850


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2 inch424
PCE
40...2001/2 inch515
PCE

Cờ lê cân lực STAHLWILLE

Stahlwille Manoskop 755, without setting scale, for series production work; setting via torque tester on the Allen screw at the end of the handle. Repeatability ±4%. The reversible adapter tools permit anticlockwise work.
Adapter tools NOT included.

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

 

tag: 755/4, 755/10, 755/20, 755/30


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1009 x 12318
PCE

Cờ lê cân lực GEDORE

Gedore DREMOMETER 8581, lightweight, rugged and resistant, ideal for use in workshops and almost all industrial manufacturing plants. Automatic rapid release with tactile and audible signal, values are not shifted and accuracy is not impacted as a result of using both hands or the actuation button being situated in a location other than the handle (as is the case with conventional torque wrenches). Both the square drive and centre of rotation are on one axis, resulting in high operating safety; can be extended to reduce the user's workload. Classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard.

 

TAG: 858101


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
600...15001 inch1608
PCE

Cờ lê cân lực GEDORE

Gedore DREMOMETER 8586, lightweight, rugged and resistant with double-square drive, ideal for use in workshops and almost all industrial manufacturing plants. Automatic rapid release with tactile and audible signal, values are not shifted and accuracy is not impacted as a result of using both hands or the actuation button being situated in a location other than the handle (as is the case with conventional torque wrenches). Both the square drive and centre of rotation are on one axis, resulting in high operating safety; can be extended to reduce the user's workload. Classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard.

 

TAG: 858601
 


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
600...15001 inch1608
PCE

Cờ lê cân lực GEDORE TBN series

Gedore Torque TBN, without scale, setting using torque tester, break-over mechanism 20° clockwise and anticlockwise, (types TBN 25, 65 and 135 for clockwise tightening only - switch the adapter around for anticlockwise), overtightening is not possible, repeatability ± 6% (< 10Nm), ±4% (> 10Nm) according to DIN/ISO 6789, factory test certificate included.
Adapter tools NOT included.

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
40...20014 x 18520
PCE

Cờ lê lực chỉ kim GEDORE ADS, BDS, CDS, DDS, EDS

Gedore Torque DS, measuring and signalling torque wrench with dial gauge and multi-functional friction pointer for controlled fastening and checking of tension on existing fastenings, with dual scale in Nm and lbf-in/lbf-ft on two-tone, easily legible dial faces. With double square drive with ball locking. Built-in overload protection - mechanical stop up to 25% overload of max. value. Display is accurate to ± 4% of the displayed value, in accordance with DIN EN ISO 6789, based on national standards. The enclosure is a light, sturdy specially designed aluminium construction, painted, with wear-resistant rubber handles. Delivered with factory test certificate to DIN EN ISO 6789.

Designs:
431420.0100 ADS 4 ...431420.0500 ADS 40 : integrated ratchet function for clockwise and anti-clockwise tightening; EPA-compliant (EPA = Electrostatic Protected Area), for use in electrostatically sensitive applications, in a sturdy plastic box
431420.0600 BDS 80AS ...431420.0800 BDS 200S : with an audio-visual signal alerting the operator when the set torque is reached, integrated ratchet function for clockwise and anti-clockwise tightening, in a sturdy plastic box
431420.0900 CDS 400S ...431420.1000 DDS 800S : with an audio-visual signal alerting the operator when the set torque is reached, integrated ratchet function for clockwise and anti-clockwise tightening, in sturdy cardboard packaging
431420.1100 EDS 1400 ...431420.1200 EDS 2000 : with an audio-visual signal alerting the operator when the set torque is reached, integrated ratchet function for clockwise and anti-clockwise tightening, with two-part handle for easier storage and transport, in sturdy cardboard packaging


UNITED KINGDOM

Made in United kingdom

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
40...2001/2 inch520
PCE

Cờ lê cân lực điện tử STAHLWILLE 730 D

STAHLWILLE Manoskop 730 D combines indicating and triggering functions in a single device, both function modes can be selected independently of each other. Quick adjustment via keypad; large display; tactile and acoustic signalling at slip point; with tolerance value input and visual evaluation via green and red display colours; memory for up to 7500 torques, can be evaluated via USB interface, display deviation ± 2% ± 1 digit. Display function even with left-hand torques. Automatic indication of next calibration date. Included in delivery: 2x 1.5-V batteries, factory test certificate and case, insertion tool not included.

Designs:
331435.0100...331435.0200: in plastic case
331435.0300...331435.0700: in sheet steel box

Appropriate accessories:
331460 Accessories for electronic torque wrench STAHLWILLE
331600 Ratchet insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool


Appropriate batteries:
2 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
65...65014 x 18 mm870
PCE
65...65022 x 28 mm892
PCE

Cờ lê cân lực HAZET 5000 CLT

Hazet 5000 CLT, Click-Lens-Type with large value readout in the display, three large digits for an easy-to-read torque setting. Accuracy ± 4% of scale value, palpable and audibly perceptible close-gap release. Reversible ratchet, ergonomically shaped handle with collar, safety locking of the handle. Easy and safe adjustment of the torque value desired by turning the handle, easy and exact adjustment of the release value desired. Delivery in safe box, with serial number and certificate.


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
40...2001/2 inch545
PCE

Cờ lê lực điện tử STAHLWILLE

STAHLWILLE MANOSKOP® 714 - indicating and click-type. Display deviation value torque ± 2 %, ± 1 digit; display deviation value angle ± 1 %, ± 1 digit, 4 measuring modes (torque, angle, torque backed up by angle, angle backed up by torque), high-definition colour display with additional side-mounted indicator lamps, freely configurable menu structure. 3 function modes: cut-out, peak (indicating mode with peak value) and track (indicating mode with current value), micro USB interface. Angle-controlled measurement without a reference arm, data storage (= 2,500 tightening jobs), as many as 200 joints can be programmed in up to 25 preset sequences, different tolerance limits can be set for each joint. Acoustic and visual assessment of the joint, the automatic keypad lock prevents inadvertent changes. Overload protection by means of acoustic and visual signals and a fail-safe system (clockwise), automatic notification of the next calibration date, either by the number of joints or the time interval. Units of measure: N m, ft lb, in lb. Tightening torque is automatically corrected if a deviating extension is entered, immediately reusable after release. Clockwise and anticlockwise tightening - it may be necessary to refit the insert tool rotated through 180° for anticlockwise tightening in the cut-out mode. Tactile and acoustic trigger signal, torque and angle are simultaneously visible. Package contents: 2 certificates (torque, angle), SENSOMASTER Basic software, USB cable, 4 micro-batteries, in case (without insert tool).

Appropriate accessories:
331560 Lithium-ion battery STAHLWILLE
331562 Docking station STAHLWILLE
331563 Rest for docking station STAHLWILLE
331565 Software STAHLWILLE SENSOMASTER
331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Appropriate batteries:
4 pieces 055050.0400 - LR03 / 1.5 V (AAA) (included in scope of delivery).


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
65...65022 x 28 mm890
PCE

Cờ lê cân lực điện tử STAHLWILLE

STAHLWILLE MANOSKOP® 714 - indicating and click-type, with reversible ratchet socket. Display deviation value torque ± 2 %, ± 1 digit; display deviation value angle ± 1 %, ± 1 digit, 4 measuring modes (torque, angle, torque backed up by angle, angle backed up by torque), high-definition colour display with additional side-mounted indicator lamps, freely configurable menu structure. 3 function modes: cut-out, peak (indicating mode with peak value) and track (indicating mode with current value), micro USB interface. Angle-controlled measurement without a reference arm, data storage (= 2,500 tightening jobs), as many as 200 joints can be programmed in up to 25 preset sequences, different tolerance limits can be set for each joint. Acoustic and visual assessment of the joint, the automatic keypad lock prevents inadvertent changes. Overload protection by means of acoustic and visual signals and a fail-safe system (clockwise), automatic notification of the next calibration date, either by the number of joints or the time interval. Units of measure: N m, ft lb, in lb. Tightening torque is automatically corrected if a deviating extension is entered, immediately reusable after release. Clockwise and anticlockwise tightening - it may be necessary to refit the insert tool rotated through 180° for anticlockwise tightening in the cut-out mode. Tactile and acoustic trigger signal, torque and angle are simultaneously visible. Package contents: reversible ratchet socket, 2 certificates (torque, angle), SENSOMASTER Basic software, USB cable, 4 micro-batteries, in case.

Appropriate accessories:
331560 Lithium-ion battery STAHLWILLE
331562 Docking station STAHLWILLE
331563 Rest for docking station STAHLWILLE
331565 Software STAHLWILLE SENSOMASTER
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Appropriate spare parts:
331600 Ratchet insert STAHLWILLE
LT000054333 735/100 - Ratchet insert tool
Appropriate batteries:
4 pieces 055050.0400 - LR03 / 1.5 V (AAA) (included in scope of delivery).


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
65...65022 x 28 mm & 3/4"890
PCE

Cờ lê cân lực điện tử TOP

Features
Both right and left directions can be measured.
The LCD backlight allows you to see the measured values ​​even when working in dark places.
Measured torque values ​​(in peak hold mode) can be recorded.
The arrival of the target torque value is notified by the lighting of the LED and the sound.
With 72 gears and a ratchet drive angle of 5°, the swing width is small, making it possible to work in narrow spaces.
It is compact with a round head.
Usage
Bicycles, automobiles, architecture, construction, water supply, electric power industry, etc.
For tightening that requires torque management, measurement of return torque, etc.


JAPAN

Made in Japan

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
40...20012.7540
PCE

Cờ lê cân lực Torcofix K GEDORE

Klassifiziert nach DIN EN ISO 6789:2003 Typ II Klasse A

Rugged, satin chrome-plated steel pipe construction, with chrome-plated ratchet and high quality plastic parts made of polyamide.
Accuracy (better than DIN specification) +/-3% with traceable factory certificate, integrated ratchet function, with interchangeable mushroom head or push-through square drive, controlled clockwise and anti-clockwise tightening by simply replugging the mushroom head, calibrated to a permissible deviation of +/- 3 % and better.

more sizes and version available on request.

 

TAG: 454900, 454902, 454905, 455010, 455020, 455030, 455040, 455055, 455075, 455185


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2 inch394
PCE
40...2001/2 inch485
PCE

Cờ lê cân lực Torcofix TF-K GEDORE

Klassifiziert nach DIN EN ISO 6789-2:2017 Typ II Klasse A

Adjustable, releasing and robust tubular torque wrench with integrated ratchet and square drive for industry and trade applications. Maximum permitted deviation of +/- 3% for controlled right- and left-hand tightening (push the square drive through to the other side to change direction). Robust, matt, powder-coated tubular steel design, with galvanised ratchet and high-quality plastic parts. Double scale Nm and vernier scale (Nm) are protected against abrasion and contamination by the large viewing window.


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1001/2 inch400
PCE
40...2001/2 inch495
PCE

Cờ lê cân lực Torcofix TE-SE GEDORE

Klassifiziert nach DIN EN ISO 6789-2:2017 Typ II Klasse A

Adjustable, releasing and robust tubular torque wrench with rectangular holder for industry and trade applications. Maximum permitted deviation of +/- 3% for controlled right- and left-hand tightening (push the square drive through to the other side to change direction). Robust, matt, powder-coated tubular steel design, with double scale Nm and vernier scale (Nm) which are protected against abrasion and contamination by the large viewing window


GERMANY

Made in Germany

Mã & tên hàng Dải cân lực (N.m)Đầu lắpChiều dài (mm) Đơn giá (vnđ) Số lượng Đặt, Gom hàng Tình trạng hàng
20...1009 x 12 mm378
PCE
40...20014 x 18 mm479
PCE