1900 98 68 25
sales@htgoods.com.vn
250,000+ sản phẩm từ 950+ thương hiệu và 2000+ đối tác OEM hàng đầu EU, G7
Đăng nhập để có giá tốt nhất
Tìm kiếm theo sản phẩm
432165 - Bộ kìm 4 chi tiết NERIOX
Bộ kìm sản xuất theo chuẩn DIN 4133, mạ Chrome...
Tìm kiếm theo thương hiệu
Sản phẩm gợi ý
Mã đặt hàng
Số lượng
VNĐ 0 mục hàng
Cờ lê cân lực NORBAR-331100
Norbar Slimline (SL), automatic clicking torque wrench for controlled clockwise tightening. Long scale, graduated in Nm and lbf/in, allows error-free and accurate setting; ergonomic plastic handle, tested mechanism with long service life. Ratchet wrench 72 teeth, accuracy of ±3% from the measured value, with declaration of conformity according to DIN EN ISO 6789-1:2017.
Made in United kingdom
331100.0100
Xem thêm >>
Cờ lê cân lực cách điện 1000V NORBAR
Norbar Insulated, 1000-volt insulation in accordance with IEC 60900:2004, automatic clicking torque wrench for controlled clockwise and anti-clockwise tightening.. Thanks to injection-moulded nylon, this torque wrench is more durable than conventional PVC-coated insulated tools. Double scale Nm and lbf/ft allows error-free and accurate setting, robust ratchet with push-through square, accuracy of ±3% from scale value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.
Linh kiện có thể lắp kèm: 327552 Bi-hexagon socket wrench bit FACOM OGV® 327935 Extension FACOM 328982 Bi-hexagon socket wrench bit FACOM OGV® 329105 Hex bit FACOM 329525 Extension FACOM
331109.0100
Phụ kiện, sản phẩm liên quan
331109.0200
Cờ lê cân lực NORBAR-331140
Norbar Professional, actuation with audible "click" signal, with fine-toothed ratchet for working angle of only 6°, for clockwise and anti-clockwise tightening, large scale length makes it easier to adjust, tightening length independent - it can be used with an extension handle, low weight, accuracy of ±3% from the measured value, in accordance with DIN/ISO 6789, with calibration certificate according to DIN EN ISO 6789-2:2017 and extension handle 500 mm.
331140.0400
Cờ lê cân lực STAHLWILLE 730NR
Stahlwille 730 NR, with reversible insert ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.
Đầu vặn đã gắn kèm sản phẩm
Có thể thay bằng các đầu vặn khác:
331610 Bit ratchet insert STAHLWILLE 331613 Bit holder insert STAHLWILLE 331620 Open-end insert STAHLWILLE 331630 Open-end insert STAHLWILLE 331637 Open ring insert STAHLWILLE 331640 Ring-end insert STAHLWILLE 331650 Ring-end insert STAHLWILLE 331660 Square insert STAHLWILLE 331680 Weld-on insert STAHLWILLE 331682 Adapter insert STAHLWILLE 331683 Adapter insert STAHLWILLE
Linh kiện gốc: 331600 Ratchet insert STAHLWILLE
Made in Germany
331171.0050
331171.0600
Cờ lê cân lực đầu tháo rời thay thế STAHLWILLE 730 N
Stahlwille 730 N, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.
Đầu vặn cấp riêng, KHÔNG kèm sản phẩm
Có thể dùng kèm đầu vặn:
331600 Ratchet insert STAHLWILLE 331602 Ratchet insert STAHLWILLE 725QR 331610 Bit ratchet insert STAHLWILLE 331613 Bit holder insert STAHLWILLE 331620 Open-end insert STAHLWILLE 331630 Open-end insert STAHLWILLE 331636 Open ended insert STAHLWILLE 331637 Open ring insert STAHLWILLE 331640 Ring-end insert STAHLWILLE 331650 Ring-end insert STAHLWILLE 331656 Ring insert STAHLWILLE 732/100 331660 Square insert STAHLWILLE 331680 Weld-on insert STAHLWILLE 331682 Adapter insert STAHLWILLE 331683 Adapter insert STAHLWILLE LT000054329 735/65 - Ratchet insert tool, fine tooth LT000054333 735/100 - Ratchet insert tool LT000054346 734/100 - Square drive insert tool LT000054557 737 - Blank end insert tool LT000054573 7370/100 - Adaptor
tag: 730n
331175.0060
331175.0600
Cờ lê cân lực STAHLWILLE 730R
Stahlwille 730 R, with reversible adapter ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers, accuracy ±4% according to DIN/ISO 6789, with factory test certificate, rugged construction, quick setting of torque with slide and locking button.
Đầu vặn ĐÃ bao gồm
Có thể dùng đầu vặn khác thay thế:
331600 Ratchet insert STAHLWILLE 331610 Bit ratchet insert STAHLWILLE 331613 Bit holder insert STAHLWILLE 331620 Open-end insert STAHLWILLE 331630 Open-end insert STAHLWILLE
331635 Open-end insert STAHLWILLE 331637 Open ring insert STAHLWILLE 331640 Ring-end insert STAHLWILLE 331650 Ring-end insert STAHLWILLE
331655 Ring-end insert STAHLWILLE 331656 Ring insert STAHLWILLE 732/100 331660 Square insert STAHLWILLE 331680 Weld-on insert STAHLWILLE 331682 Adapter insert STAHLWILLE 331683 Adapter insert STAHLWILLE
331684 Adapter insert STAHLWILLE
Link kiện gốc:
331600 Ratchet insert STAHLWILLE
331181.0100
331181.0750
Cờ lê cân lực STAHLWILLE 730, 730Quick
Stahlwille 730, for clockwise and counter-clockwise tightening. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button. Stahlwille 730 Quick, for clockwise and counter-clockwise tightening. More ergonomic and with increased comfort; improved access and operation of the clamping lever recessed in the handle. Optimised ball handle for fatigue-free work. The new design with opposite, V-shaped mounts and integrated magnifier allows settings to be adjusted quickly and accurately - even from an awkward angle. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.
331655 Ring-end insert STAHLWILLE 331660 Square insert STAHLWILLE 331680 Weld-on insert STAHLWILLE 331682 Adapter insert STAHLWILLE 331683 Adapter insert STAHLWILLE
331182.0100
331182.0810
Cờ lê cân lực STAHLWILLE 730 FIX
Stahlwille 730 Fix, for series production tasks; the adjusting knob can be removed after the torque has been set, preventing inadvertent changes to the settings. The Torx® tamper-resistant screw also protects against unwanted manipulation, just like the enclosed adhesive seal; settings cannot be adjusted without breaking the seal. For clockwise and counter-clockwise tightening by turning over the insert tools. Robust design, rapid adjustment of torque with QuickSelect; the torque is set and then locked by pulling out the adjusting knob and turning it. Two-component handle with ergonomic green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol). A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached; accuracy ±3% in accordance with DIN 6789. No need for manual reset to zero, since the measuring element is only under load while force is being applied. Supplied with factory certificate, Torx® tamper-resistant screw and adhesive seal. Without insert tool.
331600 Ratchet insert STAHLWILLE 331602 Ratchet insert STAHLWILLE 725QR 331610 Bit ratchet insert STAHLWILLE 331613 Bit holder insert STAHLWILLE 331620 Open-end insert STAHLWILLE 331630 Open-end insert STAHLWILLE 331636 Open ended insert STAHLWILLE 331637 Open ring insert STAHLWILLE 331640 Ring-end insert STAHLWILLE 331650 Ring-end insert STAHLWILLE 331656 Ring insert STAHLWILLE 732/100 331660 Square insert STAHLWILLE 331680 Weld-on insert STAHLWILLE 331682 Adapter insert STAHLWILLE 331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth LT000054333 735/100 - Ratchet insert tool LT000054346 734/100 - Square drive insert tool LT000054557 737 - Blank end insert tool LT000054573 7370/100 - Adaptor
331185.0600
Cờ lê cân lực FUTURO-331205
For controlled clockwise tightening, with ratchet wrench, automatic actuation with audible signal. Double micrometer scale Nm and lbf/in / lbf/ft allows for exact, error-free setting. Quick adjustment, ergonomic 2-component handle, accuracy of ±3% from measured value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.
331205.0160
Cờ lê cân lực NORBAR
NORBAR Slimline (SL), automatic actuation with audible signal. Long scale, graduated in Nm and lbf-in/lbf-ft, allows error-free and precise setting; ergonomic plastic handle, tried-and-tested mechanism with long service life. With plug connection for mounting insert tools, accuracy ±4% of the scale value, with declaration of conformity in accordance with DIN EN ISO 6789-1:2017. Supplied without insert tool.
331600 Ratchet insert STAHLWILLE 331602 Ratchet insert STAHLWILLE 725QR 331610 Bit ratchet insert STAHLWILLE 331613 Bit holder insert STAHLWILLE 331620 Open-end insert STAHLWILLE 331637 Open ring insert STAHLWILLE 331640 Ring-end insert STAHLWILLE 331660 Square insert STAHLWILLE 331680 Weld-on insert STAHLWILLE 331682 Adapter insert STAHLWILLE 331683 Adapter insert STAHLWILLE
331300.0100
Cờ lê cân lực STAHLWILLE
Stahlwille Manoskop 755, without setting scale, for series production work; setting via torque tester on the Allen screw at the end of the handle. Repeatability ±4%. The reversible adapter tools permit anticlockwise work. Adapter tools NOT included. Appropriate accessories: 331600 Ratchet insert STAHLWILLE 331602 Ratchet insert STAHLWILLE 725QR 331610 Bit ratchet insert STAHLWILLE 331613 Bit holder insert STAHLWILLE 331620 Open-end insert STAHLWILLE 331630 Open-end insert STAHLWILLE 331637 Open ring insert STAHLWILLE 331640 Ring-end insert STAHLWILLE 331650 Ring-end insert STAHLWILLE 331660 Square insert STAHLWILLE 331680 Weld-on insert STAHLWILLE 331682 Adapter insert STAHLWILLE 331683 Adapter insert STAHLWILLE
tag: 755/4, 755/10, 755/20, 755/30
331361.0300
Cờ lê cân lực GEDORE
Gedore DREMOMETER 8581, lightweight, rugged and resistant, ideal for use in workshops and almost all industrial manufacturing plants. Automatic rapid release with tactile and audible signal, values are not shifted and accuracy is not impacted as a result of using both hands or the actuation button being situated in a location other than the handle (as is the case with conventional torque wrenches). Both the square drive and centre of rotation are on one axis, resulting in high operating safety; can be extended to reduce the user's workload. Classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard.
TAG: 858101
331370.0100
Gedore DREMOMETER 8586, lightweight, rugged and resistant with double-square drive, ideal for use in workshops and almost all industrial manufacturing plants. Automatic rapid release with tactile and audible signal, values are not shifted and accuracy is not impacted as a result of using both hands or the actuation button being situated in a location other than the handle (as is the case with conventional torque wrenches). Both the square drive and centre of rotation are on one axis, resulting in high operating safety; can be extended to reduce the user's workload. Classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard.
TAG: 858601
331375.0100
Cờ lê cân lực điện tử STAHLWILLE 730 D
STAHLWILLE Manoskop 730 D combines indicating and triggering functions in a single device, both function modes can be selected independently of each other. Quick adjustment via keypad; large display; tactile and acoustic signalling at slip point; with tolerance value input and visual evaluation via green and red display colours; memory for up to 7500 torques, can be evaluated via USB interface, display deviation ± 2% ± 1 digit. Display function even with left-hand torques. Automatic indication of next calibration date. Included in delivery: 2x 1.5-V batteries, factory test certificate and case, insertion tool not included. Designs: 331435.0100...331435.0200: in plastic case 331435.0300...331435.0700: in sheet steel box Appropriate accessories: 331460 Accessories for electronic torque wrench STAHLWILLE 331600 Ratchet insert STAHLWILLE LT000054329 735/65 - Ratchet insert tool, fine tooth LT000054333 735/100 - Ratchet insert tool Appropriate batteries: 2 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).
331435.0400