Cờ lê cân lực NORBAR

NORBAR Professional, automatic torque wrench for controlled clockwise and anti-clockwise tightening.
Anticlockwise fastening by simply rotating the mushroom head. With clearly legible scale in Nm and lbf-in with extremely high resolution. Quick and easy adjustment. Intuitive adjuster lock with visual marking. Ergonomically shaped two-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in automotive, aviation and industrial environments. +/- 3% accuracy, exceeds all international standards for torque wrenches. Every wrench is supplied with a calibration certificate in accordance with DIN EN ISO 6789-2:2017 which also meets the requirements of ISO 9000:2000, including recalibration memory by TimeStrip® (= reg. trademark of TimeStrip UK Ltd.)

Linh kiện thay thế:
331105 Ratchet spare part set NORBAR

Made in United kingdom

Cờ lê lực điện tử ProTronic Plus NORBAR

ProTronic Plus has all the features of the standard ProTronic versions and also offers advanced features. Equipped with Bluetooth, ProTronic Plus works with a specially developed app for even more intuitive control. All features are installed in a smaller housing with flush-mounted buttons to prevent accidental activation during use. Quick adjustment via keypad, large display, tactile and acoustic trigger signal, with tolerance value input and optical evaluation by means of green or red display

Made in United kingdom

Cờ lê cân lực STAHLWILLE 730NR

Stahlwille 730 NR, with reversible insert ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

Đầu vặn đã gắn kèm sản phẩm

Có thể thay bằng các đầu vặn khác:

331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Linh kiện gốc:
331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực STAHLWILLE 730R

Stahlwille 730 R, with reversible adapter ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers, accuracy ±4% according to DIN/ISO 6789, with factory test certificate, rugged construction, quick setting of torque with slide and locking button.

Đầu vặn Đàbao gồm

Có thể dùng đầu vặn khác thay thế:

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

Link kiện gốc:

331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực FUTURO

For controlled clockwise and anti-clockwise tightening, robust ratchet with push-through square, automatic actuation with audible signal. Double micrometer scale Nm and lbf/ft allows for exact, error-free setting. Quick adjustment, ergonomic 2-component handle, accuracy of ±3% from measured value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.

Made in United kingdom

Cờ lê cân lực FACOM 209 A

Facom 209 A, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with replaceable reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.

Made in Italy

Cờ lê cân lực FACOM 306.M

Facom 306.M, automatic actuation with audible and tactile signal, tried-and-tested mechanism with long durability, fine-tooth reversible ratchet with 75 teeth and 5° readjustment angle for clockwise tightening, accuracy of ±4% from the measured value in accordance with DIN/ISO 6789, with factory testing certificate and plastic case.

Made in Italy

Cờ lê cân lực FACOM

Facom 306.MF, with swivel head, automatic actuation with audible and tactile signal, tried-and-tested mechanism with long durability, fine-tooth reversible ratchet with 75 teeth and 5° readjustment angle for clockwise tightening, accuracy of ±4% from the measured value in accordance with DIN/ISO 6789, with factory testing certificate and plastic case.

Made in Italy

Cờ lê cân lực GEDORE

Gedore DREMOMETER 8572 F, lightweight, rugged and resistant, ideal for use in workshops and almost all industrial manufacturing plants. Automatic rapid release with tactile and audible signal, values are not shifted and accuracy is not impacted as a result of using both hands or the actuation button being situated in a location other than the handle (as is the case with conventional torque wrenches). Both the square drive and centre of rotation are on one axis, resulting in high operating safety; can be extended to reduce the user's workload. Classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard.

TAG: 857201, 8572F

Made in Germany

Cờ lê lực điện tử FACOM E.306A

Facom E.306A, for clockwise and anti-clockwise tightening, very easy operation, self-testing and zero setting upon switch-on, accuracy ±2%, ±1 digit (20% - 100% of the measuring range), 9 torque values can be preset, memory for 250 values, with USB connection, visual light and audible signal (LED and beeper), LEDs remain visible even where access is difficult; measuring mode: peak or tracking. Scope of delivery: interchangeable reversible ratchet, batteries, software and data cable, factory test certificate to ISO 6789, in plastic case.

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE


Appropriate spare parts:
331600 Ratchet insert STAHLWILLE

Made in France