Cờ lê cân lực NORBAR-331100

Norbar Slimline (SL), automatic clicking torque wrench for controlled clockwise tightening. Long scale, graduated in Nm and lbf/in, allows error-free and accurate setting; ergonomic plastic handle, tested mechanism with long service life. Ratchet wrench 72 teeth, accuracy of ±3% from the measured value, with declaration of conformity according to DIN EN ISO 6789-1:2017.

Made in United kingdom

Cờ lê cân lực NORBAR

Norbar Professional, automatic clicking torque wrench for controlled clockwise tightening. With compact ratchet wrench, a clearly legible scale in Nm and lbf/in with extremely high resolution. Quick and easy adjustment. Intuitive adjuster lock with visual marking. Ergonomically shaped 2-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in automotive, aviation and industrial environments. +/- 3% accuracy, exceeds all international standards for torque wrenches. Each wrench is supplied with a calibration certificate according to DIN EN ISO 6789-2:2017, incl. recalibration reminder by means of TimeStrip® (= reg. trademark of TimeStrip UK Ltd.).

Linh kiện thay thế
331105 Ratchet spare part set NORBAR

Made in United kingdom

Cờ lê cân lực cách điện 1000V NORBAR

Norbar Insulated, 1000-volt insulation in accordance with IEC 60900:2004, automatic clicking torque wrench for controlled clockwise and anti-clockwise tightening.. Thanks to injection-moulded nylon, this torque wrench is more durable than conventional PVC-coated insulated tools. Double scale Nm and lbf/ft allows error-free and accurate setting, robust ratchet with push-through square, accuracy of ±3% from scale value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.

Linh kiện có thể lắp kèm:
327552 Bi-hexagon socket wrench bit FACOM OGV®
327935 Extension FACOM
328982 Bi-hexagon socket wrench bit FACOM OGV®
329105 Hex bit FACOM
329525 Extension FACOM

Made in United kingdom

Cờ lê cân lực NORBAR-331140

Norbar Professional, actuation with audible "click" signal, with fine-toothed ratchet for working angle of only 6°, for clockwise and anti-clockwise tightening, large scale length makes it easier to adjust, tightening length independent - it can be used with an extension handle, low weight, accuracy of ±3% from the measured value, in accordance with DIN/ISO 6789, with calibration certificate according to DIN EN ISO 6789-2:2017 and extension handle 500 mm.

Made in United kingdom

Cờ lê cân lực FACOM 209 PB

Facom 209 PB, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with fixed reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube

Made in Italy

Cờ lê cân lực STAHLWILLE 730NR

Stahlwille 730 NR, with reversible insert ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

Đầu vặn đã gắn kèm sản phẩm

Có thể thay bằng các đầu vặn khác:

331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Linh kiện gốc:
331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực cách điện 1000V STAHLWILLE MANOSKOP® 730R

The MANOSKOP® 730R VDE torque wrench has been specifically designed for use in the electrical sector and is characterised by its high-quality finish and reliability. The torque wrench complies with stringent VDE guidelines, ensuring reliable protection against electrical hazards. Thanks to the easy-to-read scale window and the precise rotary knob, the MANOSKOP® 730R VDE allows users to set the desired torque simply and accurately. The torque wrench triggers mechanically, meaning a noticeable, audible click indicates that the torque is set. This function not only provides increased safety but also ensures that users always work within the required specifications. Another practical function of the MANOSKOP® 730R VDE is the possibility of self-adjustment without the need to disassemble the wrench and re-test the insulation. This flexibility allows users to adjust the torque as required without additional effort. Moreover, there is the option to replace the ratchet, especially with the 725QR VDE model. This function allows users to easily replace the ratchet without having to re-test the insulation. These features make the MANOSKOP® 730R VDE a versatile, user-friendly tool for demanding work in electrical environments.

Properties:

• VDE-compliant up to 1000 V
• Adjustment without disassembly or re-testing
• Ratchet can be replaced without re-testing
• Quick adjustment via QuickSelect rotary knob

Made in Germany

Cờ lê cân lực đầu tháo rời thay thế STAHLWILLE 730 N

Stahlwille 730 N, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers; accuracy ±3% according to DIN/ISO 6789, with factory test certificate. Rugged construction, quick setting of torque with QuickSelect; pulling out and turning the setting button sets the torque and then locks it in. The measuring element is only under load when tightening, no need for manual reset to zero.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

tag: 730n

Made in Germany

Cờ lê cân lực STAHLWILLE 730R

Stahlwille 730 R, with reversible adapter ratchet, for clockwise and anticlockwise tightening. Can easily be heard and felt when it triggers, accuracy ±4% according to DIN/ISO 6789, with factory test certificate, rugged construction, quick setting of torque with slide and locking button.

Đầu vặn Đàbao gồm

Có thể dùng đầu vặn khác thay thế:

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

Link kiện gốc:

331600 Ratchet insert STAHLWILLE

Made in Germany

Cờ lê cân lực STAHLWILLE 730, 730Quick

Stahlwille 730, for clockwise and counter-clockwise tightening. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.
Stahlwille 730 Quick, for clockwise and counter-clockwise tightening. More ergonomic and with increased comfort; improved access and operation of the clamping lever recessed in the handle. Optimised ball handle for fatigue-free work. The new design with opposite, V-shaped mounts and integrated magnifier allows settings to be adjusted quickly and accurately - even from an awkward angle. A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached. Accuracy of ±4% in accordance with DIN/ISO 6789, with factory test certificate. Robust design, rapid adjustment of torque with slider and locking button.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE

331635 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE

331655 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

331684 Adapter insert STAHLWILLE

Made in Germany

Cờ lê cân lực STAHLWILLE 730 FIX

Stahlwille 730 Fix, for series production tasks; the adjusting knob can be removed after the torque has been set, preventing inadvertent changes to the settings. The Torx® tamper-resistant screw also protects against unwanted manipulation, just like the enclosed adhesive seal; settings cannot be adjusted without breaking the seal. For clockwise and counter-clockwise tightening by turning over the insert tools. Robust design, rapid adjustment of torque with QuickSelect; the torque is set and then locked by pulling out the adjusting knob and turning it. Two-component handle with ergonomic green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol). A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached; accuracy ±3% in accordance with DIN 6789. No need for manual reset to zero, since the measuring element is only under load while force is being applied. Supplied with factory certificate, Torx® tamper-resistant screw and adhesive seal. Without insert tool.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Made in Germany

Cờ lê cân lực FUTURO-331205

For controlled clockwise tightening, with ratchet wrench, automatic actuation with audible signal. Double micrometer scale Nm and lbf/in / lbf/ft allows for exact, error-free setting. Quick adjustment, ergonomic 2-component handle, accuracy of ±3% from measured value (more accurate than DIN EN ISO 6789), with declaration of conformity to DIN EN ISO 6789-1:2017.

Made in United kingdom

Cờ lê cân lực NERIOX

Automatically triggering torque wrench for controlled right-hand tightening, error-free and accurate torque pre-setting via easy-to-read laser scale, with audible and tactile signal when the pre-set torque is reached. Reversible ratchet and robust metal handle. High accuracy of the measured value according to DIN/ISO 6789-1:2017, with factory test certificate and plastic case.

Made in Germany

Cờ lê cân lực NORBAR

NORBAR Slimline (SL), automatic actuation with audible signal. Long scale, graduated in Nm and lbf-in/lbf-ft, allows error-free and precise setting; ergonomic plastic handle, tried-and-tested mechanism with long service life. With plug connection for mounting insert tools, accuracy ±4% of the scale value, with declaration of conformity in accordance with DIN EN ISO 6789-1:2017.
Supplied without insert tool.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Made in United kingdom

Cờ lê cân lực NORBAR

NORBAR Professional, automatic torque wrench for controlled clockwise and anti-clockwise tightening, with plug connection for mounting insert tools. +/- 3% accuracy, exceeds all international standards for torque wrenches. Every wrench is supplied with a calibration certificate in accordance with DIN EN ISO 6789-2:2017, which also meets the requirements of ISO 9000:2000. Includes recalibration memory by TimeStrip® (= reg. trademark of TimeStrip UK Ltd.). Clear scale with extremely high resolution. Intuitive adjuster lock with visual marking. Ergonomically shaped two-component handle with handle centre mark for correct calibration. Handle material and lens resist chemicals in common usage in the automotive, aviation and industrial environments.
Supplied without insert tool.

Đầu vặn cấp riêng, KHÔNG kèm sản phẩm

Có thể dùng kèm đầu vặn:

331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

Made in United kingdom

Cờ lê cân lực FACOM 209 A

Facom 209 A, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with replaceable reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.

Made in Italy

Cờ lê cân lực FACOM 209 D

Facom 209 D, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, without reversible ratchet, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.

Made in Italy

Cờ lê cân lực STAHLWILLE

Stahlwille Manoskop 755, without setting scale, for series production work; setting via torque tester on the Allen screw at the end of the handle. Repeatability ±4%. The reversible adapter tools permit anticlockwise work.
Adapter tools NOT included.

Appropriate accessories:
331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE

tag: 755/4, 755/10, 755/20, 755/30

Made in Germany

Cờ lê cân lực GEDORE

Gedore DREMOMETER 8581, lightweight, rugged and resistant, ideal for use in workshops and almost all industrial manufacturing plants. Automatic rapid release with tactile and audible signal, values are not shifted and accuracy is not impacted as a result of using both hands or the actuation button being situated in a location other than the handle (as is the case with conventional torque wrenches). Both the square drive and centre of rotation are on one axis, resulting in high operating safety; can be extended to reduce the user's workload. Classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard.

TAG: 858101

Made in Germany

Cờ lê cân lực GEDORE

Gedore DREMOMETER 8586, lightweight, rugged and resistant with double-square drive, ideal for use in workshops and almost all industrial manufacturing plants. Automatic rapid release with tactile and audible signal, values are not shifted and accuracy is not impacted as a result of using both hands or the actuation button being situated in a location other than the handle (as is the case with conventional torque wrenches). Both the square drive and centre of rotation are on one axis, resulting in high operating safety; can be extended to reduce the user's workload. Classified in accordance with DIN EN ISO 6789-2:2017 Type II Class A, including traceable test certificate, calibrated to a maximum permitted deviation of ± 3% and therefore more precise than the value of ± 4% required by the standard.

TAG: 858601
 

Made in Germany

Cờ lê cân lực điện tử TOP

Features
Both right and left directions can be measured.
The LCD backlight allows you to see the measured values ​​even when working in dark places.
Measured torque values ​​(in peak hold mode) can be recorded.
The arrival of the target torque value is notified by the lighting of the LED and the sound.
With 72 gears and a ratchet drive angle of 5°, the swing width is small, making it possible to work in narrow spaces.
It is compact with a round head.
Usage
Bicycles, automobiles, architecture, construction, water supply, electric power industry, etc.
For tightening that requires torque management, measurement of return torque, etc.

Made in Japan

Cờ lê cân lực Torcofix K GEDORE

Klassifiziert nach DIN EN ISO 6789:2003 Typ II Klasse A

Rugged, satin chrome-plated steel pipe construction, with chrome-plated ratchet and high quality plastic parts made of polyamide.
Accuracy (better than DIN specification) +/-3% with traceable factory certificate, integrated ratchet function, with interchangeable mushroom head or push-through square drive, controlled clockwise and anti-clockwise tightening by simply replugging the mushroom head, calibrated to a permissible deviation of +/- 3 % and better.

more sizes and version available on request.

TAG: 454900, 454902, 454905, 455010, 455020, 455030, 455040, 455055, 455075, 455185

Made in Germany