
Cờ lê cân lực STAHLWILLE 730 FIX
Stahlwille 730 Fix, for series production tasks; the adjusting knob can be removed after the torque has been set, preventing inadvertent changes to the settings. The Torx® tamper-resistant screw also protects against unwanted manipulation, just like the enclosed adhesive seal; settings cannot be adjusted without breaking the seal. For clockwise and counter-clockwise tightening by turning over the insert tools. Robust design, rapid adjustment of torque with QuickSelect; the torque is set and then locked by pulling out the adjusting knob and turning it. Two-component handle with ergonomic green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol). A stop signal which can be clearly heard and felt is automatically given when the correct torque is reached; accuracy ±3% in accordance with DIN 6789. No need for manual reset to zero, since the measuring element is only under load while force is being applied. Supplied with factory certificate, Torx® tamper-resistant screw and adhesive seal. Without insert tool.
Đầu vặn cấp riêng, KHÔNG kèm sản phẩm
Có thể dùng kèm đầu vặn:
331600 Ratchet insert STAHLWILLE
331602 Ratchet insert STAHLWILLE 725QR
331610 Bit ratchet insert STAHLWILLE
331613 Bit holder insert STAHLWILLE
331620 Open-end insert STAHLWILLE
331630 Open-end insert STAHLWILLE
331636 Open ended insert STAHLWILLE
331637 Open ring insert STAHLWILLE
331640 Ring-end insert STAHLWILLE
331650 Ring-end insert STAHLWILLE
331656 Ring insert STAHLWILLE 732/100
331660 Square insert STAHLWILLE
331680 Weld-on insert STAHLWILLE
331682 Adapter insert STAHLWILLE
331683 Adapter insert STAHLWILLE
LT000054329 735/65 - Ratchet insert tool, fine tooth
LT000054333 735/100 - Ratchet insert tool
LT000054346 734/100 - Square drive insert tool
LT000054557 737 - Blank end insert tool
LT000054573 7370/100 - Adaptor

Made in Germany
Mã & tên hàng | Dải cân lực (N.m) | Đầu lắp | Chiều dài (mm) | Đơn giá (vnđ) | Số lượng | Đặt, Gom hàng | Tình trạng hàng |
---|---|---|---|---|---|---|---|
331185.0100 Cờ lê cân lực STAHLWILLE 10...50 N.m |
10...50 | 9 x 12 mm | 330 |
PCE
|
|
||
331185.0200 Cờ lê cân lực STAHLWILLE 20...100 N.m |
20...100 | 9 x 12 mm | 386 |
PCE
|
|
||
331185.0300 Cờ lê cân lực STAHLWILLE 25...130 N.m |
25...130 | 14 x 18 mm | 421 |
PCE
|
|
||
331185.0400 Cờ lê cân lực STAHLWILLE 40...200 N.m |
40...200 | 14 x 18 mm | 467 |
PCE
|
|
||
331185.0500 Cờ lê cân lực STAHLWILLE 80...400 N.m |
80...400 | 14 x 18 mm | 607 |
PCE
|
|
||
331185.0600 Cờ lê cân lực STAHLWILLE 130...650 N.m |
130...650 | 14 x 18 mm | 890 |
PCE
|
|
||
331185.0700 Cờ lê cân lực STAHLWILLE 130...650 N.m |
130...650 | 22 x 28 mm | 911 |
PCE
|
|
||
331185.0800 Cờ lê cân lực STAHLWILLE 160...800 N.m |
160...800 | 22 x 28 mm | 1178 |
PCE
|
|
||
331185.0900 Cờ lê cân lực STAHLWILLE 200...1000 N.m |
200...1000 | 22 x 28 mm | 1363 |
PCE
|
|
Xem thêm >>




Cờ lê cân lực FACOM 209 A
Facom 209 A, automatic trigger with acoustic signal, dual scale (with Nm and ft.lbs) and twin-start thread saves time due to 2x faster adjustment, ergonomic plastic handle, tried and tested mechanism with long service life, with replaceable reversible ratchet for clockwise tightening, accuracy ±4% from the measured value, with factory test certificate according to ISO 6789. Supplied in protective plastic tube.

Made in Italy
Mã & tên hàng | Dải cân lực (N.m) | Đầu lắp | Chiều dài (mm) | Đơn giá (vnđ) | Số lượng | Đặt, Gom hàng | Tình trạng hàng |
---|---|---|---|---|---|---|---|
331315.0100 Cờ lê cân lực FACOM J.209A50 |
10...50 | 3/8 & 9 x 12 mm | 337 |
PCE
|
|
||
331315.0200 Cờ lê cân lực FACOM S.209A100 |
20...100 | 1/2 & 9 x 12 mm | 396 |
PCE
|
|
||
331315.0300 Cờ lê cân lực FACOM S.209A200 |
40...200 | 1/2 & 14 x 18 mm | 466 |
PCE
|
|
||
331315.0400 Cờ lê cân lực FACOM S.209A340 |
60...340 | 1/2 & 14 x 18 mm | 618 |
PCE
|
|
Xem thêm >>