Tô vít cân lực PB 9320.Set B3 CBB DigiTorque V02

With the PB 9320.Set B3 CBB DigiTorque V02, sensitive materials such as aluminium, carbon or Plexiglas can be screwed gently and non-destructively. The high-precision release mechanism can be adjusted very precisely and easily via the rotating cap at the end of the handle, without the need for any auxiliary tools.

When recalibrating with a tester, a button function allows you to easily enter the torque values for the calibration. It’s even easier with a mobile phone (Android). This allows you to not only transfer the torque values, but also read in and read out other useful device information.

• For screwdriving with repeatable tightening torque (certified +/- 6%)
• For laboratory, development, hobby, etc., with C6 bits for slotted, PH, PZ, TX and hexagon socket screws
• PrecisionBits with precise tips, optimum fit in the screws
• 2-component soft-sheath handle, comfortable handling
• Electronics with NFC interface, simplified adjustment with NFC or button function
• Automatic triggering, supported by audible and palpable click
• Rotating cap with digital display, easily adjustable without auxiliary tools
• Replaceable battery, type CR1/3N 3 volt lithium
• Warranty for torque handles, 3 years from date of purchase for manufacturing and material defects
• Calibration, if necessary, adjustment recommended after 5000 clicks or annually
• Calibration via accredited test laboratory or manufacturer recommended

The torque screwdriver set with digital display is supplied in a practical toolbox in a high-quality banderole.

Made in Switzerland

Tô vít cân lực PB 9325.Set A1 CBB DigiTorque V02

With the PB 9325.Set A1 CBB DigiTorque V02, sensitive materials such as aluminium, carbon or Plexiglas can be screwed gently and non-destructively. The high-precision release mechanism can be adjusted very precisely and easily via the rotating cap at the end of the handle, without the need for any auxiliary tools.

When recalibrating with a tester, a button function allows you to easily enter the torque values for the calibration. It’s even easier with a mobile phone (Android). This allows you to not only transfer the torque values, but also read in and read out other useful device information.

• For screwdriving with repeatable tightening torque (certified +/- 6%)
• For machining, interchangeable blades PB 225 for Torx® and hexagon socket screws, torque range 3.4–16.0 Nm
• Interchangeable blades with precise tips, optimum fit in the screws
• Lever handle with soft surface, comfortable grip and easier torque transfer
• Electronics with NFC interface, simplified adjustment with NFC or button function
• Automatic triggering, supported by audible and palpable click
• Rotating cap with digital display, easily adjustable without auxiliary tools
• Replaceable battery, type CR1/3N 3 volt lithium
• Warranty for torque handles, 3 years from date of purchase for manufacturing and material defects
• Calibration, if necessary, adjustment recommended after 5000 clicks or annually
• Calibration via accredited test laboratory or manufacturer recommended

The torque screwdriver set with digital display is supplied in a practical toolbox in a high-quality banderole.

Made in Switzerland

Tô vít cân lực PB 9325.Set B1 CBB DigiTorque V02

With the PB 9325.Set B1 CBB DigiTorque V02, sensitive materials such as aluminium, carbon or Plexiglas can be screwed gently and non-destructively. The high-precision release mechanism can be adjusted very precisely and easily via the rotating cap at the end of the handle, without the need for any auxiliary tools.

When recalibrating with a tester, a button function allows you to easily enter the torque values for the calibration. It’s even easier with a mobile phone (Android). This allows you to not only transfer the torque values, but also read in and read out other useful device information.

• For screwdriving with repeatable tightening torque (certified +/- 6%)
• For laboratory, development, hobby, etc., with C6 bits for slotted, PH, PZ, TX and hexagon socket screws
• PrecisionBits with precise tips, optimal fit in the screws
• Lever handle with soft surface, comfortable grip and easier torque transfer
• Electronics with NFC interface, simplified adjustment with NFC or button function
• Automatic triggering, supported by audible and palpable click
• Rotating cap with digital display, easily adjustable without auxiliary tools
• Interchangeable battery, type CR1/3N 3 volt lithium
• Warranty for torque handles, 3 years from date of purchase for manufacturing and material defects
• Calibration, if necessary, adjustment recommended after 5000 clicks or annually
• Calibration recommended by accredited test laboratory or manufacturer

The torque screwdriver set with digital display is supplied in a practical toolbox in a high-quality banderole.

Made in Switzerland

Tô vít cân lực cố định PB Swiss Tools

PB 8313 M, torque handle with torque preset, with magnetic socket for bits C6.3 and E6.3. loosening torque 100% higher than tightening torque. Users with a corresponding measuring instrument can reset or recalibrate the trigger value themselves within a specific range (with long hex key 3 mm). Precision ± 6% in accordance with EN ISO 6789. Supplied with factory test certificate.

Appropriate accessories:
337350 Slotted-screw blade PB Swiss Tools
337380 Phillips blade PB Swiss Tools
337410 Pozidriv blade PB Swiss Tools
337440 Hexagon blade
337460 TORX® blade PB Swiss Tools
337475 TORX®Plus blade PB Swiss Tools
337500 Coupler PB Swiss Tools
337510 Socket wrench blade PB Swiss Tools
337515 Socket wrench blade PB Swiss Tools
337720 Slotted-screw blade PB Swiss Tools
337760 Phillips blade PB Swiss Tools
337810 Pozidriv blade PB Swiss Tools
337860 Hexagon blade PB Swiss Tools
337920 TORX® blade PB Swiss Tools
337950 TORX® blade with borehole PB Swiss Tools

tag: pb8313m

Made in Switzerland

Tô vít cân lực cố định PB Swiss Tools

PB 8314 M, Torque handle with set torque value, with magnetic socket for bits C6.3 and E6.3. Release torque 100% higher than tightening torque. Users with a corresponding measuring instrument can set or recalibrate the triggering value themselves to a specific range (with long hexagon key 3 mm). Precision ± 6% in accordance with EN ISO 6789. Supplied with factory test certificate.

Appropriate accessories:
337350 Slotted-screw blade PB Swiss Tools
337380 Phillips blade PB Swiss Tools
337410 Pozidriv blade PB Swiss Tools
337440 Hexagon blade
337460 TORX® blade PB Swiss Tools
337475 TORX®Plus blade PB Swiss Tools
337500 Coupler PB Swiss Tools
337510 Socket wrench blade PB Swiss Tools
337515 Socket wrench blade PB Swiss Tools
337720 Slotted-screw blade PB Swiss Tools
337760 Phillips blade PB Swiss Tools
337810 Pozidriv blade PB Swiss Tools
337860 Hexagon blade PB Swiss Tools
337920 TORX® blade PB Swiss Tools
337950 TORX® blade with borehole PB Swiss Tools

tag: pb8314m

Made in Switzerland

Tô vít cân lực cố định PB Swiss Tools

PB 8314 A, with set torque value, triggering torque 100% higher than tightening torque. Users with a corresponding measuring instrument can set the triggering value themselves in a new range or recalibrate (with long hexagon key3 mm). Accuracy ± 6% according to EN IS= 6789, supplied with factory test certificate, without changing blades PB 215.

Appropriate accessories:
336100 Screwdriver blade PB Swiss Tools
336110 Phillips blade PB Swiss Tools
336120 Pozidriv blade PB Swiss Tools
336130 Allen key blade PB Swiss Tools
336150 Blade for TORX© screws PB Swiss Tools
336152 Blade for TORX©plus screws PB Swiss Tools
336158 Blade with magnetic bit holder PB Swiss Tools
336159 Blade with square drive PB Swiss Tools
336160 Reamer blade PB Swiss Tools

tag: pb8314a

Made in Switzerland