Tô vít cân lực PB Swiss Tools

PB 8317.M ESD, Torque handle with infinite mechanical adjustment on the handle's end can be set without accessory tool. Display with analogue scale, can be recalibrated with the code supplied. When the torque set is reached, the torque handle triggers an audible signal. The unscrewing torque is +100% of the set value, screws that have already been tightened can be unscrewed again without difficulty. Delivered with recalibration tool, factory test certificate; accuracy ± 6% in accordance with EN ISO 6789. With magnetic female hex drive for bits 1/4" C6.3 and E6.3.

Appropriate accessories:
337720 Slotted-screw blade PB Swiss Tools
337760 Phillips blade PB Swiss Tools
337810 Pozidriv blade PB Swiss Tools
337860 Hexagon blade PB Swiss Tools
337920 TORX® blade PB Swiss Tools
337950 TORX® blade with borehole PB Swiss Tools


Appropriate spare parts:
332002 Recalibration tool PB Swiss Tools

tag: pb8317mesd

Made in Switzerland

Tô vít cân lực PB Swiss Tools PB 9320 A

With the PB 9320.A DigiTorque V02, sensitive materials such as aluminium, carbon or Plexiglas can be screwed gently and non-destructively. The high-precision release mechanism can be adjusted very precisely and easily via the rotating cap at the end of the handle, without the need for any auxiliary tools.

When recalibrating with a tester, a button function allows you to easily enter the torque values for the calibration. It’s even easier with a mobile phone (Android). This allows you to not only transfer the torque values, but also read in and read out other useful device information.

• For screwdriving with repeatable tightening torque (certified +/- 6%)
• For interchangeable blades PB 215, torque ranges 0.4–2.0 Nm or 1.0–5.0 Nm
• Interchangeable blades with precise tips, optimum fit in the screws
• 2-component soft-sheath handle, comfortable handling
• Electronics with NFC interface, simplified adjustment with NFC or button function
• Automatic triggering, supported by audible and palpable click
• Rotating cap with digital display, easily adjustable without auxiliary tools
• Replaceable battery, type CR1/3N 3 volt lithium
• Warranty for torque handles, 3 years from date of purchase for manufacturing and material defects
• Calibration, if necessary, adjustment recommended after 5000 clicks or annually
• Calibration via accredited test laboratory or manufacturer recommended

The torque screwdriver with digital display is supplied in a high-quality cardboard box.

Made in Switzerland

Tô vít cân lực PB Swiss Tools PB 9320.M DigiTorque V02

With the PB 9320.M DigiTorque V02, sensitive materials such as aluminium, carbon or Plexiglas can be screwed gently and non-destructively. The high-precision release mechanism can be adjusted very precisely and easily via the rotating cap at the end of the handle, without the need for any auxiliary tools.

When recalibrating with a tester, a button function allows you to easily enter the torque values for the calibration. It’s even easier with a mobile phone (Android). This allows you to not only transfer the torque values, but also read in and read out other useful device information.

• For screwdriving with repeatable tightening torque (certified +/- 6%)
• Magnetic holder for C6 and E6 bits, torque ranges 0.4–2.0 Nm or 1.0–5.0 Nm
• PrecisionBits with precise tips, optimum fit in the screws
• 2-component soft-sheath handle, comfortable handling
• Electronics with NFC interface, simplified adjustment with NFC or button function
• Automatic triggering, supported by audible and palpable click
• Rotating cap with digital display, easily adjustable without auxiliary tools
• Replaceable battery, type CR1/3N 3 volt lithium
• Warranty for torque handles, 3 years from date of purchase for manufacturing and material defects
• Calibration, if necessary, adjustment recommended after 5000 clicks or annually
• Calibration via accredited test laboratory or manufacturer recommended

The torque screwdriver with digital display is supplied in a high-quality cardboard box.

Made in Switzerland

Tô vít cân lực điện tử PB Swiss Tools

PB 9325 DigiTorque V02, robust and precise mechanics with double gearing for audible and tangible release torque; direct measurement of the spring force by special sensor, with lever handle for high torque range. The torque can be set using a handle cap with no need for auxiliary tools and is shown continuously on the easy-to-read display. When recalibrating, torque values can be transmitted wirelessly via the built-in NFC interface or by means of a two-button function. Information can also be imported and exported via the interface on the mobile phone, such as battery status, recalibration schedule and personal information (name, company, department, etc.). Accuracy of ± 6% for screwdriving work with repeatable accuracy for tightening torque, replaceable battery, battery gauge, with declaration of conformity in accordance with EN ISO 6789:2017, replacement blades not included.

Designs:
332035.0100 Type A, for interchangeable blades PB 225

tag: pb9325DigiTorqueV02, pb9325a

Made in Switzerland

Tô vít cân lực PB Swiss Tools PB 9320.Set A1 CBB DigiTorque V02

With the PB 9320.Set A1 CBB DigiTorque V02, sensitive materials such as aluminium, carbon or Plexiglas can be screwed gently and non-destructively. The high-precision release mechanism can be adjusted very precisely and easily via the rotating cap at the end of the handle, without the need for any auxiliary tools.

When recalibrating with a tester, a button function allows you to easily enter the torque values for the calibration. It’s even easier with a mobile phone (Android). This allows you to not only transfer the torque values, but also read in and read out other useful device information.

• For screwdriving with repeatable tightening torque (certified +/- 6%)
• For machining, interchangeable blades PB 215 for Torx® screws, torque range 0.4–2.0 Nm
• Interchangeable blades with precise tips, optimum fit in the screws
• 2-component soft-sheath handle, comfortable handling
• Electronics with NFC interface, simplified adjustment with NFC or button function
• Automatic triggering, supported by audible and palpable click
• Rotating cap with digital display, easily adjustable without auxiliary tools
• Replaceable battery, type CR1/3N 3 volt lithium
• Warranty for torque handles, 3 years from date of purchase for manufacturing and material defects
• Calibration, if necessary, adjustment recommended after 5000 clicks or annually
• Calibration via accredited test laboratory or manufacturer recommended

The torque screwdriver set with digital display is supplied in a practical toolbox in a high-quality banderole.

Made in Switzerland

Tô vít cân lực PB 9320.Set A3 CBB DigiTorque V02

With the PB 9320.Set A3 CBB DigiTorque V02, sensitive materials such as aluminium, carbon or Plexiglas can be screwed gently and non-destructively. The high-precision release mechanism can be adjusted very precisely and easily via the rotating cap at the end of the handle, without the need for any auxiliary tools.

When recalibrating with a tester, a button function allows you to easily enter the torque values for the calibration. It’s even easier with a mobile phone (Android). This allows you to not only transfer the torque values, but also read in and read out other useful device information.

• For screwdriving with repeatable tightening torque (certified +/- 6%)
• For machining, interchangeable blades PB 215 for Torx® screws, torque range 1.0–5.0 Nm
• Interchangeable blades with precise tips, optimum fit in the screws
• 2-component soft-sheath handle, comfortable handling
• Electronics with NFC interface, simplified adjustment with NFC or button function
• Automatic triggering, supported by audible and palpable click
• Rotating cap with digital display, easily adjustable without auxiliary tools
• Replaceable battery, type CR1/3N 3 volt lithium
• Warranty for torque handles, 3 years from date of purchase for manufacturing and material defects
• Calibration, if necessary, adjustment recommended after 5000 clicks or annually
• Calibration via accredited test laboratory or manufacturer recommended

The torque screwdriver set with digital display is supplied in a practical toolbox in a high-quality banderole.

Made in Switzerland

Tô vít cân lực PB 9320.Set B2 CBB DigiTorque V02

With the PB 9320.Set B2 CBB DigiTorque V02, sensitive materials such as aluminium, carbon or Plexiglas can be screwed gently and non-destructively. The high-precision release mechanism can be adjusted very precisely and easily via the rotating cap at the end of the handle, without the need for any auxiliary tools.

When recalibrating with a tester, a button function allows you to easily enter the torque values for the calibration. It’s even easier with a mobile phone (Android). This allows you to not only transfer the torque values, but also read in and read out other useful device information.

• For screwdriving with repeatable tightening torque (certified +/- 6%)
• For laboratory, development, hobby, etc., with C6 bits for slotted, PH, PZ, TX and hexagon socket screws
• PrecisionBits with precise tips, optimum fit in the screws
• 2-component soft-sheath handle, comfortable handling
• Electronics with NFC interface, simplified adjustment with NFC or button function
• Automatic triggering, supported by audible and palpable click
• Rotating cap with digital display, easily adjustable without auxiliary tools
• Replaceable battery, type CR1/3N 3 volt lithium
• Warranty for torque handles, 3 years from date of purchase for manufacturing and material defects
• Calibration, if necessary, adjustment recommended after 5000 clicks or annually
• Calibration via accredited test laboratory or manufacturer recommended

The torque screwdriver set with digital display is supplied in a practical toolbox in a high-quality banderole.

Made in Switzerland

Tô vít cân lực PB 9320.Set B3 CBB DigiTorque V02

With the PB 9320.Set B3 CBB DigiTorque V02, sensitive materials such as aluminium, carbon or Plexiglas can be screwed gently and non-destructively. The high-precision release mechanism can be adjusted very precisely and easily via the rotating cap at the end of the handle, without the need for any auxiliary tools.

When recalibrating with a tester, a button function allows you to easily enter the torque values for the calibration. It’s even easier with a mobile phone (Android). This allows you to not only transfer the torque values, but also read in and read out other useful device information.

• For screwdriving with repeatable tightening torque (certified +/- 6%)
• For laboratory, development, hobby, etc., with C6 bits for slotted, PH, PZ, TX and hexagon socket screws
• PrecisionBits with precise tips, optimum fit in the screws
• 2-component soft-sheath handle, comfortable handling
• Electronics with NFC interface, simplified adjustment with NFC or button function
• Automatic triggering, supported by audible and palpable click
• Rotating cap with digital display, easily adjustable without auxiliary tools
• Replaceable battery, type CR1/3N 3 volt lithium
• Warranty for torque handles, 3 years from date of purchase for manufacturing and material defects
• Calibration, if necessary, adjustment recommended after 5000 clicks or annually
• Calibration via accredited test laboratory or manufacturer recommended

The torque screwdriver set with digital display is supplied in a practical toolbox in a high-quality banderole.

Made in Switzerland

Tô vít cân lực FUTURO

With scale, easy to set the required torque value using adjustment wheel at the end of the handle, ergonomic two-component grip, slip clutch, triggers at the exact moment it reaches the set torque, over-tightening impossible. Supplied with interchangeable bit holder for 1/4" bits C 6.3, with declaration of conformity according to DIN EN ISO 6789-1:2017.

Made in United kingdom

Tô vít cân lực PB 9325.Set A1 CBB DigiTorque V02

With the PB 9325.Set A1 CBB DigiTorque V02, sensitive materials such as aluminium, carbon or Plexiglas can be screwed gently and non-destructively. The high-precision release mechanism can be adjusted very precisely and easily via the rotating cap at the end of the handle, without the need for any auxiliary tools.

When recalibrating with a tester, a button function allows you to easily enter the torque values for the calibration. It’s even easier with a mobile phone (Android). This allows you to not only transfer the torque values, but also read in and read out other useful device information.

• For screwdriving with repeatable tightening torque (certified +/- 6%)
• For machining, interchangeable blades PB 225 for Torx® and hexagon socket screws, torque range 3.4–16.0 Nm
• Interchangeable blades with precise tips, optimum fit in the screws
• Lever handle with soft surface, comfortable grip and easier torque transfer
• Electronics with NFC interface, simplified adjustment with NFC or button function
• Automatic triggering, supported by audible and palpable click
• Rotating cap with digital display, easily adjustable without auxiliary tools
• Replaceable battery, type CR1/3N 3 volt lithium
• Warranty for torque handles, 3 years from date of purchase for manufacturing and material defects
• Calibration, if necessary, adjustment recommended after 5000 clicks or annually
• Calibration via accredited test laboratory or manufacturer recommended

The torque screwdriver set with digital display is supplied in a practical toolbox in a high-quality banderole.

Made in Switzerland

Tô vít cân lực PB 9325.Set B1 CBB DigiTorque V02

With the PB 9325.Set B1 CBB DigiTorque V02, sensitive materials such as aluminium, carbon or Plexiglas can be screwed gently and non-destructively. The high-precision release mechanism can be adjusted very precisely and easily via the rotating cap at the end of the handle, without the need for any auxiliary tools.

When recalibrating with a tester, a button function allows you to easily enter the torque values for the calibration. It’s even easier with a mobile phone (Android). This allows you to not only transfer the torque values, but also read in and read out other useful device information.

• For screwdriving with repeatable tightening torque (certified +/- 6%)
• For laboratory, development, hobby, etc., with C6 bits for slotted, PH, PZ, TX and hexagon socket screws
• PrecisionBits with precise tips, optimal fit in the screws
• Lever handle with soft surface, comfortable grip and easier torque transfer
• Electronics with NFC interface, simplified adjustment with NFC or button function
• Automatic triggering, supported by audible and palpable click
• Rotating cap with digital display, easily adjustable without auxiliary tools
• Interchangeable battery, type CR1/3N 3 volt lithium
• Warranty for torque handles, 3 years from date of purchase for manufacturing and material defects
• Calibration, if necessary, adjustment recommended after 5000 clicks or annually
• Calibration recommended by accredited test laboratory or manufacturer

The torque screwdriver set with digital display is supplied in a practical toolbox in a high-quality banderole.

Made in Switzerland

Tô vít cân lực cố định PB Swiss Tools

PB 8313 M, torque handle with torque preset, with magnetic socket for bits C6.3 and E6.3. loosening torque 100% higher than tightening torque. Users with a corresponding measuring instrument can reset or recalibrate the trigger value themselves within a specific range (with long hex key 3 mm). Precision ± 6% in accordance with EN ISO 6789. Supplied with factory test certificate.

Appropriate accessories:
337350 Slotted-screw blade PB Swiss Tools
337380 Phillips blade PB Swiss Tools
337410 Pozidriv blade PB Swiss Tools
337440 Hexagon blade
337460 TORX® blade PB Swiss Tools
337475 TORX®Plus blade PB Swiss Tools
337500 Coupler PB Swiss Tools
337510 Socket wrench blade PB Swiss Tools
337515 Socket wrench blade PB Swiss Tools
337720 Slotted-screw blade PB Swiss Tools
337760 Phillips blade PB Swiss Tools
337810 Pozidriv blade PB Swiss Tools
337860 Hexagon blade PB Swiss Tools
337920 TORX® blade PB Swiss Tools
337950 TORX® blade with borehole PB Swiss Tools

tag: pb8313m

Made in Switzerland

Tô vít cân lực cố định PB Swiss Tools

PB 8314 M, Torque handle with set torque value, with magnetic socket for bits C6.3 and E6.3. Release torque 100% higher than tightening torque. Users with a corresponding measuring instrument can set or recalibrate the triggering value themselves to a specific range (with long hexagon key 3 mm). Precision ± 6% in accordance with EN ISO 6789. Supplied with factory test certificate.

Appropriate accessories:
337350 Slotted-screw blade PB Swiss Tools
337380 Phillips blade PB Swiss Tools
337410 Pozidriv blade PB Swiss Tools
337440 Hexagon blade
337460 TORX® blade PB Swiss Tools
337475 TORX®Plus blade PB Swiss Tools
337500 Coupler PB Swiss Tools
337510 Socket wrench blade PB Swiss Tools
337515 Socket wrench blade PB Swiss Tools
337720 Slotted-screw blade PB Swiss Tools
337760 Phillips blade PB Swiss Tools
337810 Pozidriv blade PB Swiss Tools
337860 Hexagon blade PB Swiss Tools
337920 TORX® blade PB Swiss Tools
337950 TORX® blade with borehole PB Swiss Tools

tag: pb8314m

Made in Switzerland

Tô vít cân lực cố định PB Swiss Tools

PB 8314 A, with set torque value, triggering torque 100% higher than tightening torque. Users with a corresponding measuring instrument can set the triggering value themselves in a new range or recalibrate (with long hexagon key3 mm). Accuracy ± 6% according to EN IS= 6789, supplied with factory test certificate, without changing blades PB 215.

Appropriate accessories:
336100 Screwdriver blade PB Swiss Tools
336110 Phillips blade PB Swiss Tools
336120 Pozidriv blade PB Swiss Tools
336130 Allen key blade PB Swiss Tools
336150 Blade for TORX© screws PB Swiss Tools
336152 Blade for TORX©plus screws PB Swiss Tools
336158 Blade with magnetic bit holder PB Swiss Tools
336159 Blade with square drive PB Swiss Tools
336160 Reamer blade PB Swiss Tools

tag: pb8314a

Made in Switzerland

Tô vít cân lực cố định PB Swiss Tools

PB 8324 A, with set torque value, triggering torque 100% higher than tightening torque. Users with a corresponding measuring instrument can set or recalibrate the triggering value themselves to a specific range (with long hexagon key 3 mm). Precision ± 6% in accordance with EN ISO 6789. Supplied with factory test certificate, without replacement blades PB 225.

Appropriate accessories:
336020 Screwdriver blade PB Swiss Tools
336030 Phillips blade PB Swiss Tools
336035 Pozidriv blade PB Swiss Tools
336040 Allen key blade PB Swiss Tools
336050 Socket wrench blade PB Swiss Tools
336055 TORX® blade PB Swiss Tools
336060 Interchangeable blade with magnetic bit holder PB Swiss Tools
336061 Interchangeable blade with square drive PB Swiss Tools

tag: pb8324a

Made in Switzerland