Bộ tô vít đóng KOKEN

For slackening and tightening of very tight nuts or screws. The torque is triggered by a hammer blow. Set containing 1 impact screwdriver, 1 coupler, 2 slotted blades 9+11 mm, 2 Phillips blades no. 2+3.

Torque    Nm    80
Outside square        1/2"
Length    mm    165
Use with hexagon socket    mm    5/16"
for bits hexagonal        5/16" C 8
 

tag: ag112a

Made in Japan

Bộ tô vít đóng KOKEN AG112F

KOKEN AG112F, for loosening and tightening very tight nuts or screws. The torque is triggered by a hammer blow.

Set contains:

2 Phillips bits no. 2+3
2 Pozidriv bits no. 2+3
2 slotted bits no. 9+11
6 hex. blades no. 4, 5, 6, 7, 8, 10
6 Torx blades no. T25,T27,T30,T40,T45,T50
5 multi-tooth bits no. M5, M6, M8, M10, M12

tag: ag112f

Made in Japan

Bộ tô vít đóng TRUSCO TMID-2S

Features
When you hit it with a hammer, the tip turns.
It is effective when turning tanned screws, rusted screws, fixed screws, etc.
Compatible with 6.35 mm hexagonal shaft and single-headed bit.
Use
Work to remove strong tightening and rusted screws.
Product specifications
Specifications / standards    
Set contents (points): 3
Cutting edge: (+) 1, 2
Overall length (mm): 123
Drive (mm): 6.35

tag: TMID2S

Made in Japan

Bộ tô vít đóng cường lực NEPROS NTD306

Features
The grip has a streamlined shape and a beautiful and original form that has never been seen before.
The tip has a magnet.
The cloth is finished in red and the minus is finished in green, making it easy to distinguish and improving workability.
Considering how to use cloth and minus, we use original chrome vanadium steel with different hardness.
The tip with the minimum gap with the screw is difficult to lick and reliably transmits torque.
Use
Nepros / general-purpose tools

Made in Japan

Bộ tô vít đóng TRUSCO

Features
When you hit it with a hammer, the tip turns.
It is very effective when turning rusted screws, fixed screws, etc.

tag: T3ID5S, TID5S

Made in Japan