Tô vít đóng 4 cạnh PB 8193 DN

PB 8193 DN, with hex socket/bolster and continuous blade for Phillips screws for the toughest but most comfortable use in industry, garages and repair workshops, with a hex socket/bolster and continuous blade for introducing high torques, loosening fixed screws with continuous blades, effective transfer of impact energy — bulls-eye effect with scaled down impact cap, labelling is permanently readable, curved handle with a soft surface, pleasant grip and high torque transmission, special alloy on spring steel base, exceptional elasticity with high hardness, laser-labelled with serial number, lifetime warranty.

Made in Switzerland

Bộ tô vít đóng KOKEN

For slackening and tightening of very tight nuts or screws. The torque is triggered by a hammer blow. Set containing 1 impact screwdriver, 1 coupler, 2 slotted blades 9+11 mm, 2 Phillips blades no. 2+3.

Torque    Nm    80
Outside square        1/2"
Length    mm    165
Use with hexagon socket    mm    5/16"
for bits hexagonal        5/16" C 8
 

tag: ag112a

Made in Japan

Bộ tô vít đóng KOKEN AG112F

KOKEN AG112F, for loosening and tightening very tight nuts or screws. The torque is triggered by a hammer blow.

Set contains:

2 Phillips bits no. 2+3
2 Pozidriv bits no. 2+3
2 slotted bits no. 9+11
6 hex. blades no. 4, 5, 6, 7, 8, 10
6 Torx blades no. T25,T27,T30,T40,T45,T50
5 multi-tooth bits no. M5, M6, M8, M10, M12

tag: ag112f

Made in Japan

Bộ tô vít đóng TRUSCO TMID-2S

Features
When you hit it with a hammer, the tip turns.
It is effective when turning tanned screws, rusted screws, fixed screws, etc.
Compatible with 6.35 mm hexagonal shaft and single-headed bit.
Use
Work to remove strong tightening and rusted screws.
Product specifications
Specifications / standards    
Set contents (points): 3
Cutting edge: (+) 1, 2
Overall length (mm): 123
Drive (mm): 6.35

tag: TMID2S

Made in Japan

Tô vít đóng tháo bulong, đai ốc KOKEN

Features
Ideal for loosening screws with crushed heads and rusted screws.
9.5mm & 12.7mm socket can be installed by removing the bit adapter.

tag: 3112N, 4112N, 3112G, 4112G

Made in Japan

Bộ tô vít đóng TRUSCO

Features
When you hit it with a hammer, the tip turns.
It is very effective when turning rusted screws, fixed screws, etc.

tag: T3ID5S, TID5S

Made in Japan