Bộ tô vít đóng KOKEN

For slackening and tightening of very tight nuts or screws. The torque is triggered by a hammer blow. Set containing 1 impact screwdriver, 1 coupler, 2 slotted blades 9+11 mm, 2 Phillips blades no. 2+3.

Torque    Nm    80
Outside square        1/2"
Length    mm    165
Use with hexagon socket    mm    5/16"
for bits hexagonal        5/16" C 8
 

tag: ag112a

Made in Japan

Bộ tô vít đóng KOKEN AG112F

KOKEN AG112F, for loosening and tightening very tight nuts or screws. The torque is triggered by a hammer blow.

Set contains:

2 Phillips bits no. 2+3
2 Pozidriv bits no. 2+3
2 slotted bits no. 9+11
6 hex. blades no. 4, 5, 6, 7, 8, 10
6 Torx blades no. T25,T27,T30,T40,T45,T50
5 multi-tooth bits no. M5, M6, M8, M10, M12

tag: ag112f

Made in Japan

Tô vít đóng cán gỗ, siêu dài VESSEL-3710505

Features
A long-axis type suitable for tightening screws in deep places.

Made in Japan

Bộ tô vít đóng VESSEL 260002

Features
Ideal for loosening screws with crushed heads and rusted screws.
The handle is thin and can be used as a general driver.
Specifications / standards    
Bit insertion part: Width across flats 6.35 mm
Bit length: 125mm
Set contents: Main unit, bits (-) 5, 6, 7, (+) No. 1, 2, 3
Set contents (points): 7
Cutting edge: (-) 5, 6, 7 x 125, (+) 1, 2, 3 x 125
Overall length (mm): 240

Made in Japan

Bộ tô vít đóng VESSEL 240001

Left and right switching can be operated with one touch
Features
Soft resin is used for the handle part.
Compatible with 8mm hexagonal shaft and single-headed bit.
If you remove the bit adapter, you can install a 12.7mm socket.
When you hit it with a hammer, the force changes to rotation, and you can tighten or loosen the screw.
You can switch between left and right with one touch.
Ideal for loosening screws with crushed heads and rusted screws.
Use
Screw tightening work ・ Screw tightening work and hard screw loosening work

Specifications:

Bit insertion part: Width across flats 8 mm
Set contents: Main unit, bit (+) 2 x 36/80, (+) 3 x 36/80, (+) 4 x 36, (-) 10 x 36
Set contents (points): 7
Cutting edge: (-) 10 ・ (+) 2 ・ 3 ・ 4 × 36, (+) 2 ・ 3 × 80
Overall length (mm): 197
Drive (mm): 12.7

Made in Japan

Bộ tô vít đóng VESSEL 250001

Features
Ideal for loosening screws with crushed heads and rusted screws.
A 12.7mm socket can be installed by removing the bit adapter.
Product specifications 
Bit insertion part: Width across flats 8 mm
Bit length: 36 mm
Set contents: Main unit, bits (-) 10, (+) 2, 3, 4
Set contents (points): 5
Overall length (mm): 190

Made in Japan

Tô vít đóng tháo bulong, đai ốc KOKEN

Features
Ideal for loosening screws with crushed heads and rusted screws.
9.5mm & 12.7mm socket can be installed by removing the bit adapter.

tag: 3112N, 4112N, 3112G, 4112G

Made in Japan