Tô vít đóng cán gỗ, siêu dài VESSEL-3710505

Features
A long-axis type suitable for tightening screws in deep places.

Made in Japan

Bộ tô vít đóng TRUSCO TMID-2S

Features
When you hit it with a hammer, the tip turns.
It is effective when turning tanned screws, rusted screws, fixed screws, etc.
Compatible with 6.35 mm hexagonal shaft and single-headed bit.
Use
Work to remove strong tightening and rusted screws.
Product specifications
Specifications / standards    
Set contents (points): 3
Cutting edge: (+) 1, 2
Overall length (mm): 123
Drive (mm): 6.35

tag: TMID2S

Made in Japan

Bộ tô vít đóng VESSEL 260002

Features
Ideal for loosening screws with crushed heads and rusted screws.
The handle is thin and can be used as a general driver.
Specifications / standards    
Bit insertion part: Width across flats 6.35 mm
Bit length: 125mm
Set contents: Main unit, bits (-) 5, 6, 7, (+) No. 1, 2, 3
Set contents (points): 7
Cutting edge: (-) 5, 6, 7 x 125, (+) 1, 2, 3 x 125
Overall length (mm): 240

Made in Japan

Bộ tô vít đóng VESSEL 240001

Left and right switching can be operated with one touch
Features
Soft resin is used for the handle part.
Compatible with 8mm hexagonal shaft and single-headed bit.
If you remove the bit adapter, you can install a 12.7mm socket.
When you hit it with a hammer, the force changes to rotation, and you can tighten or loosen the screw.
You can switch between left and right with one touch.
Ideal for loosening screws with crushed heads and rusted screws.
Use
Screw tightening work ・ Screw tightening work and hard screw loosening work

Specifications:

Bit insertion part: Width across flats 8 mm
Set contents: Main unit, bit (+) 2 x 36/80, (+) 3 x 36/80, (+) 4 x 36, (-) 10 x 36
Set contents (points): 7
Cutting edge: (-) 10 ・ (+) 2 ・ 3 ・ 4 × 36, (+) 2 ・ 3 × 80
Overall length (mm): 197
Drive (mm): 12.7

Made in Japan

Tô vít đóng cường lực NEPROS-8070411

A driver that has both appearance and strength
Features
The grip has a streamlined shape and a beautiful and original form that has never been seen before.
The cloth is finished in red and the minus is finished in green, making it easy to distinguish and improving workability.
Considering how to use cloth and minus, we use original chrome vanadium steel with different hardness.
The tip with the minimum gap with the screw is difficult to lick and reliably transmits torque.
Use
Nepros / general-purpose tools

Made in Japan