Tô vít đóng dẹt PB PB 8102 DN

PB 8102 DN, with hex socket/bolster and continuous blade for slotted screws. For the toughest but most comfortable use in industry, garages and repair workshops, with a hex socket/bolster and continuous blade for introducing high torques, loosening fixed screws with continuous blades, effective transfer of impact energy — bulls-eye effect, safe use as a chisel, for soft to medium-hard materials, bulls-eye effect with scaled down impact cap, labelling is permanently readable, curved handle with a soft surface, pleasant grip and high torque transmission, special alloy on spring steel base, exceptional elasticity with high hardness, laser-labelled with serial number, lifetime warranty.

Tags: PB8102DN

Made in Switzerland

Tô vít đóng 4 cạnh PB 8193 DN

PB 8193 DN, with hex socket/bolster and continuous blade for Phillips screws for the toughest but most comfortable use in industry, garages and repair workshops, with a hex socket/bolster and continuous blade for introducing high torques, loosening fixed screws with continuous blades, effective transfer of impact energy — bulls-eye effect with scaled down impact cap, labelling is permanently readable, curved handle with a soft surface, pleasant grip and high torque transmission, special alloy on spring steel base, exceptional elasticity with high hardness, laser-labelled with serial number, lifetime warranty.

Tags: PB8193DN

Made in Switzerland

Tô vít đóng cán gỗ, siêu dài VESSEL-3710505

Features
A long-axis type suitable for tightening screws in deep places.

Made in Japan

Bộ tô vít đóng TRUSCO TMID-2S

Features
When you hit it with a hammer, the tip turns.
It is effective when turning tanned screws, rusted screws, fixed screws, etc.
Compatible with 6.35 mm hexagonal shaft and single-headed bit.
Use
Work to remove strong tightening and rusted screws.
Product specifications
Specifications / standards    
Set contents (points): 3
Cutting edge: (+) 1, 2
Overall length (mm): 123
Drive (mm): 6.35

tag: TMID2S

Made in Japan

Bộ tô vít đóng VESSEL 260002

Features
Ideal for loosening screws with crushed heads and rusted screws.
The handle is thin and can be used as a general driver.
Specifications / standards    
Bit insertion part: Width across flats 6.35 mm
Bit length: 125mm
Set contents: Main unit, bits (-) 5, 6, 7, (+) No. 1, 2, 3
Set contents (points): 7
Cutting edge: (-) 5, 6, 7 x 125, (+) 1, 2, 3 x 125
Overall length (mm): 240

Made in Japan

Bộ tô vít đóng VESSEL 240001

Left and right switching can be operated with one touch
Features
Soft resin is used for the handle part.
Compatible with 8mm hexagonal shaft and single-headed bit.
If you remove the bit adapter, you can install a 12.7mm socket.
When you hit it with a hammer, the force changes to rotation, and you can tighten or loosen the screw.
You can switch between left and right with one touch.
Ideal for loosening screws with crushed heads and rusted screws.
Use
Screw tightening work ・ Screw tightening work and hard screw loosening work

Specifications:

Bit insertion part: Width across flats 8 mm
Set contents: Main unit, bit (+) 2 x 36/80, (+) 3 x 36/80, (+) 4 x 36, (-) 10 x 36
Set contents (points): 7
Cutting edge: (-) 10 ・ (+) 2 ・ 3 ・ 4 × 36, (+) 2 ・ 3 × 80
Overall length (mm): 197
Drive (mm): 12.7

Made in Japan