MAHR Việt Nam | Thương hiệu MAHR - USA

Thước cặp điện tử MAHR MarCal 16 EWR , IP67

Rail and slider made of hardened stainless steel. Easy-to-read, high-contrast LCD display. REFERENCE-system with LOCK function.

Designs:
Type A: depth gauge rectangular
Type B: depth gauge round Ø 1.5 mm
Type C: depth gauge rectangular, data output
Type D: depth gauge round Ø 1.5 mm, data output
Type E: depth gauge rectangular, fine adjustment
Type F: depth gauge round Ø 1.5 mm, fine adjustment
Type G: depth gauge rectangular, fine adjustment, data output
Type H: depth gauge round Ø 1.5 mm, fine adjustment, data output
Type L: data output
Type M: fine adjustment, data output
Type N: fine adjustment
Type W: Without (depth gauge, fine adjustment, data output)

Features:
High-contrast LCD display
REFERENCE system
RESET (set display to zero)
Conversion mm/inch
LOCK function (key lock)
Auto-ON/-OFF
Data output MarConnect (depending on type)

Package contents:
Delivered in case incl. operating instructions.

Thước cặp điện tử MAHR Marcal 16 EWRi, IP67

Easy-to-read, high-contrast LCD display. Inductive, waterproof REFERENCE system. After setting the zero position once, the zero remains stored. If the caliper is switched ON or the slide is moved the caliper is immediately ready for measurement. The measuring surfaces are precision-lapped.

Designs:
Type C: depth gauge rectangular, data output
Type D: depth gauge round Ø 1.5 mm, data output
Type L: data output

Features:
LCD display
REFERENCE system
AUTO-ON / OFF
HOLD (storage of measured values)
RESET (set display to zero)
PRESET (for entering a numerical value)
Reversal of counting direction
mm/inch
LOCK function (key lock)
DATA output MarConnect (integrated wireless)

Package contents:
Delivered in case incl. operating instructions.

Thước cặp điện tử MAHR MarCal 16 EWR-V / EWRi-V , IP67

Digital universal caliper for various internal and external measurements (slots, grooves, threads, etc.).

Designs:
009270.0100: Data output MarConnect
009270.0200: dataoutput integrated wireless

Features:
LCD display
Conversion mm/inch
Reference lock/unlock
Auto-ON/-OFF

Package contents:
Caliper, depth measuring bridge, setting gauge, measuring force device, 6 pair of measuring inserts for internal and external measurement.

Thước cặp điện tử MAHR, chuẩn chống nước IP65, MarCal 18EWR-V

Digital universal caliper gauge can be used for various inside and outside measurements (recesses, grooves, threads, etc.). Measuring system with reference lock function.

Features:
LCD display
Conversion mm/inch
Reference lock/unlock
Auto-ON/-OFF
RESET (setting display to zero)
PRESET (fixed value setting)
Data output MarConnect

Package contents:
Caliper gauge in case incl. 5 pairs measuring inserts.

Thước cặp điện tử MAHR MarCal 18 EWR , IP65

Easy-to-read, high-contrast LCD display. Rail and slider made of steel hardened and stainless. Measuring system with reference lock function, prevents measurement errors in consequence of pressing the operating buttons by accident.

Features:
LCD display
Conversion mm/inch
PRESET (fixed value setting)
RESET (setting display to zero)
Reference lock/unlock
Auto-ON/-OFF
Data output MarConnect

Package contents:
Delivered in case.

Thước cặp điện tử MAHR MarCal 18 EWR , IP65

Easy-to-read, high-contrast LCD display. Rail and slider made of steel hardened and stainless. Measuring system with reference lock function, prevents measurement errors in consequence of pressing the operating buttons by accident. Measuring jaws with knife-shaped measuring surfaces.

Features:
LCD display
Conversion mm/inch
PRESET (fixed value setting)
RESET (setting display to zero)
Reference lock/unlock
Auto-ON/-OFF
Data output MarConnect

Package contents:
Delivered in case.

Thước cặp điện tử MAHR MarCal 18 ESA

Digital workshop caliper in lightweight construction. With measuring tips and prismatic guide. Rail and slide made of aluminium. 50% weight savings. Wear- and scratch-resistant thanks to hard-anodised surface 1100 HV (similar to ceramic).
Measuring jaws and tips stainless, hardened and ground. Easy, precision operation thanks to prismatic guide.

Features:
High-contrast LCD display
Conversion mm/inch
RESET (zero setting)
PRESET

Package contents:
Delivered in case.
 

Thước cặp MAHR MarCal 16, Resolution 0.05 mm

Series 16 - Stainless steel, vernier and scale satin chrome plated, with thread table on rear side.

Designs:
010720.0100...010720.0120: Fixing screw on top
010720.0300: Thumb locking

Features:
Depth gauge rectangular

Package contents:
Delivered in own case.

Made in Eu

Thước đo sâu điện tử MAHR MarCal 30, IP67

Universal depth gauge with lapped guideway surfaces. Rail and slider made of hardened stainless steel. Easy-to-read, high-contrast LCD display. REFERENCE-system with LOCK function.

Designs:
Type TB: Gauge rail with measuring tip Ø 1.5 x 5 mm
Type TD: Hook gauge rail

Features:
LCD display
REFERENCE system
RESET (setting display to zero)
PRESET (fixed value setting)
LOCK function (key lock)
mm/inch
Auto-ON/-OFF
Data output MarConnect
012410.0700...012410.0900:
Data output MarConnect (integrated wireless)

Package contents:
Delivered in case incl. operating instructions.

Appropriate batteries:
1 pieces 055051.0545 - CR2032 / 3.0 V (included in scope of delivery).

Made in Eu

Thước đo sâu điện tử MAHR MarCal 30 EWRi-U, with replaceable probe tip

Replaceable probe tips for adjusting to all kinds of measurement situations. Stainless steel.

Designs:
Type TE: Double hook gauge rail

Features:
AUTO ON / OFF
RESET (set display to zero)
PRESET (for entering a numerical value)
LOCK function (key lock)
Conversion mm/inch
HOLD (storage of measured values)
DATA (data transmission)
Data output MarConnect (integrted wireless)

Package contents:
Delivered in case incl. double hook probe tip 012417.0100 (for width and distance measurement)

Appropriate batteries:
1 pieces 055051.0545 - CR2032 / 3.0 V (included in scope of delivery).

Made in Eu

Thước đo sâu điện tử MAHR, MarCal 30 EWRi, IP67

Stainless steel version with measuring pin Ø 2 mm. For small measuring depths in bores, grooves and channels.

Features:
LCD display
On/Off function
Zero setting in any position (without losing the relation to the reference point)
mm/inch conversion
LOCK function (Keylock)
Reversal of counting direction
Data output MarConnect (integrated wireless)

Package contents:
Delivered in case.

Appropriate accessories:
009275 Accessories MAHR

Made in Eu

Thước đo sâu cơ khí MAHR MarCal 30 N

Stainless, hardened version, vernier and main scale with satin chrome finish for glare free reading.

Designs:
Type TB: Gauge rail with measuring tip

Package contents:
Delivered in case.

Made in Germany

Bộ dụng cụ đo cơ khí MAHR, CLASSIC-DIGITAL

Consisting of:
013754.0200 CLASSIC-DIGITAL:
1x 009260.1011 Caliper gauge digital MarCal 16 EWR 150B / 0.01 / IP67
1x 015580.0100 Micrometer gauge Micromar 40 A 0...25 / 0.01
1x 039355.0100 Hard metal scriber RICO-MARKER Aluminium, Total length 165 mm
1x 040711.0300 Bevelled precision square NERIOX INOX 100 x 75 / DIN875/00 100 x 75
1x 058560.0100 Stainless steel rule 150 x 13 (1/1 - 1/1)
1x 062410.0100 Radius gauge 1 17 gauges, radii 1...7 mm
1x 062501.0100 Thread pitch gauge NERIOX Metric ISO thread 0.25...6

Package contents:
Delivered in wooden case CLASSIC 014480.0200

Made in Usa

Panme điện tử MAHR Micromar 40, IP40 / IP65

MICROMASTER - external micrometer with integral friction coupling in the sleeve and carbide-coated measuring surfaces.

Designs:
015100.0100: LCD display
UNIT/SET (mm/inch conversion)
015100.0200...015100.0500: additionally
ZERO/ABS (zero setting of the display/ABSOLUTE mode)
Automatic shutdown
015100.0600...015100.0900: additionally
Data output Opto

Package contents:
Delivered in case incl. factory certificate.

Note:
*IP40 only when using the data output.

Made in Eu

Panme điện tử MAHR Micromar 40 EWR-V/EWRi-V , Set including 6 pairs of measuring anvils, IP65

Version with quick spindle setting and non-rotating spindle. Easy-to-read, high-contrast LCD display, measuring spindle stainless, hardened and ground with mounting bores for measuring anvils Ø 3.5 mm. Ratchet integrated into measurement barrel. The steel frame has thermal insulation.

Designs:
015132.0500: Data output MarConnect (Digimatic,Opto RS232C, USB)
015132.0600: Data output MarConnect (integrted wireless)

Features:
LCD display
REFERENCE-system
RESET (sets display to zero)
Conversion mm/inch
ABS (switch between relative/absolute mode)
LOCK-Funktion (Keylock)
HOLD (storage of measured values)
PRESET (fixed value setting)
OL (Tolerance and warning limits)
DATA (data transmission)
Data output MarConnect

Package contents:
Delivered in case incl. 6 pairs of measuring anvils.
 

Made in Eu

Panme điện tử MAHR Micromar 40, QUICK DRIVE, IP65

Version with quick spindle setting and non-rotating spindle. High contrast analog display, carbide-tipped measuring surfaces, measuring spindle made of stainless steel hardened and ground. Ratchet is integrated in the thimble, lacquered steel frame, heat insulated.

Designs:
015135.0110...015135.0140: Type EWR-L:
Quick spindle setting, non-rotating spindle and data output Marconnect
015135.1010...015135.1040: Type EWRi-L:
Quick spindle setting, non-rotating spindle and data output Marconnect (integrated wireless)

Features:
LCD display
REFERENCE-system
RESET (sets display to zero)
ABS (switch between relative/absolute mode)
Conversion mm/inch
LOCK-Funktion (Keylock)
TOL (Tolerance limits)
ORIGIN (fixed value setting)
HOLD (storage of value)

Package contents:
Delivered in case incl. adjustment gauge (from 25 mm).

Made in Eu

Panme MAHR Micromar 40 A

Feeler ratchet integrated into scale barrel. Carbide-coated measuring surfaces, scale barrel and sleeve satin chrome-plated.

Package contents:
Delivered in case incl. adjusting wrench and setting gauge (from 25 mm).

Made in Eu

Bộ panme MAHR Micromar 40 SA

Feeler ratchet integrated into scale barrel. Carbide-coated measuring surfaces, scale barrel and sleeve satin chrome-plated.

Designs:
015585.0100: Set of 4 external micrometers
0...25 / 25...50 / 50...75 / 75...100 mm incl. adjusting gauges 25 / 75 mm
015585.0200: Set of 4 external micrometers
100...125 / 125...150 / 150...175 / 175...200 mm incl. adjusting gauges 125 / 175 mm

Note:
Individual Micrometers 015580

Package contents:
Delivered in wooden case incl. adjusting wrench.

Made in Eu

Panme MAHR Micromar 40 F

For quickly checking the diameter of cylindrical parts, thickness and length measurements. Particularly suitable for precise series production parts.

Features:
Finger button for lifting the measuring anvil
Adjustable tolerance marks for good/reject classification
Carbide-coated measuring surfaces
Measuring spindle made from stainless steel
Operating and display parts satin chrome-plated
Constant measuring force

Package contents:
Delivered in case incl. adjusting wrench.

Made in Czech republic