BAHCO Việt Nam | Thương hiệu BAHCO - SWEDEN

Bộ đục đa năng BAHCO

Ripping chisel set, 5-piece, consisting of ripping chisel with blade width 6, 12, 16, 20 and 25 mm. Handle made of high-strength red plastic, blade made of high quality tool steel with a conical neck, with complete bevel, i.e. the long sides of the blade are bevelled up to around half of the blade thickness , finely ground and can be used immediately.

Made in Sweden

Đục dẹt đa năng Bahco

Resilient handle from impact-resistant PPE, blade has a hardness of 58-61HRc for lasting sharpness. Knuckle protection arched so it can be also be used as a lever. The rear of the blade can be tapped with a hammer in order to work faster. Can be used for mortise joints on doors and for ripping.

Made in Sweden

Đục dẹt lưỡi cong Bahco

BAHCO 422P, special 2-part handle optimises guiding and handling. Curved for simple working on flat workpieces or curvatures. Precision-ground cutting tips with maximum sharpness. Hardened and heat treated for long service life. Fine-ground and ready for use. With protective holster.

Made in Sweden

Mũi khoét lỗ BAHCO

Bahco 3833 Superior Wood & Bricks, high-quality, carbide-tipped hole saw with deep slots for quick and effective cutting. Ideal for wood, wood with nails, brick, MDF, plasterboard, veneer, plastics etc. With an extra-large cutting depth of 71 mm for cutting directly through walls in one go.

Made in Belarus

Mũi khoét lỗ BAHCO

Bahco Sandflex® 3830 Metal & Wood, universal hole saws for cutting ferrous and non-ferrous steels, cast iron, aluminium, brass, copper, stainless steel, wood and plastics. Bi-metal design with 8% cobalt for high wear resistance, side slots enable quick and easy removal of cores. Suitable for use with electric drilling machines, both stationary and portable. Cutting depth 38 mm.

Made in Belarus

Mũi khoét lỗ BAHCO

Bahco 3832 Fibreglass & Masonry, high-quality, carbide-tipped hole saw. Ideal for hard-to-cut steels, abrasive materials such as fibreglass, stone or plasterboard, brick, ceramic tiles, laminate and hardwood. Side slots enable quick and easy removal of cores, suitable for use with electric drilling machines, both stationary and portable. Cutting depth 38 mm.

Made in Belarus

Bộ mũi khoét lỗ BAHCO

Bahco Sandflex® 3834-152 Metal & Wood, with the most common hole saws for mechanical engineering, plumbing and electrical installations. Universal hole saws for cutting ferrous and non-ferrous steels, cast iron, aluminium, brass, copper, stainless steel, wood and plastics. Bi-metal design with 8% cobalt for high wear resistance, side slots enable quick and easy removal of cores. Suitable for use with electric drilling machines, both stationary and portable. Cutting depth 38 mm.

Made in Belarus

Mũi khoan khoét lỗ BAHCO

Bahco 3834-ARBR, for hole saws Ø 14 to 30 mm, standard arbor with different shaft thicknesses.

Appropriate spare parts:
359850 Centre drill BAHCO

Made in Eu

Mũi khoan khoét lỗ BAHCO

Bahco 3834-ARBR, for hole saws Ø 32 to 152 mm, Power Driver™ arbor; increases rigidity and eliminates hole saw play by distributing the load from the thread to the solid cap. Available with different shaft thicknesses.

Appropriate spare parts:
359850 Centre drill BAHCO

Made in Eu

Mũi khoan khoét lỗ BAHCO

Bahco 3834-ARBR QC, for hole saws Ø 32 to 152 mm, QuickChange arbor; quick-change mechanism, no additional tools are needed to change the hole saw, available with different shank thicknesses.

Appropriate spare parts:
359850 Centre drill BAHCO

Made in Eu

Mũi khoan khoét lỗ BAHCO

Bahco 3834-ARBR EL/ES/ESM, for hole saws Ø 16 to 159 mm, with special quick-eject function for simple ejection of the core. No more time lost removing cores after drilling. Available with different shank thicknesses.

Designs:
359845.0100...359845.0200: ES: for carbide-tipped hole saws with carbide all-round drills (fibreglass and masonry)
359845.0300...359845.0400: EL: for universal hole saws, carbide centre drill included (wood and brick)
359845.0500...359845.0600: ESM: for bi-metal hole saws with HSS drills (metal and wood)

Appropriate spare parts:
359850 Centre drill BAHCO

Made in Eu

Mũi khoan khoét lỗ STARRETT

Bahco 3834-xxx, drills a hole in the workpiece before the teeth of the hole saw take effect. It guides the hole saw and holds it in the correct position during sawing.


Suitable for:
359820 Hole saw arbor BAHCO
359825 Hole saw arbor BAHCO
359835 Hole saw arbor BAHCO
359845 Hole saw arbor BAHCO

Made in Eu

Hole saw adapter BAHCO

Bahco 3834-UPSIZE, for all hole saws, for enlarging existing holes. The adapter is attached to the centre drill with a hex wrench to integrate smaller hole saws into larger hole saws.

Made in Eu

Bộ mũi khoét lỗ BAHCO

Bahco Sandflex® 3834-65 Metal & Wood, with the most common hole saws for electrical installations. Universal hole saws for cutting ferrous and non-ferrous steels, cast iron, aluminium, brass, copper, stainless steel, wood and plastics. Bi-metal design with 8% cobalt for high wear resistance, side slots enable cores to be removed quickly and easily. Suitable for use with electric drilling machines, both stationary and portable. Cutting depth 38 mm.

Made in Belarus

Bộ mũi khoét lỗ BAHCO

Bahco Sandflex® 3834-64 Metal & Wood, with the most common hole saws for universal applications in an industrial and electrical setting. Universal hole saws for cutting ferrous and non-ferrous steels, cast iron, aluminium, brass, copper, stainless steel, wood and plastics. Bi-metal design with 8% cobalt for high wear resistance, side slots enable cores to be removed quickly and easily. Suitable for use with electric drilling machines, both stationary and portable. Cutting depth 38 mm.

Made in Belarus

Dụng cụ tháo bulong gãy BAHCO

For broken-off screws and pins, of vanadium-extra steel, gunmetal finish, with cylindrical extraction pin which does not expand broken-off screws.


Suitable for:
366735 Screw extractor set BAHCO

Made in Sweden

Bộ dụng cụ tháo bulong gãy BAHCO

Bahco 1418S, consisting of 5 screw extractors, Guide bushings, twist drills, in plastic case.

Appropriate spare parts:
152000 Twist drill WALTER TITEX
366730 Screw extractor BAHCO

Made in Sweden

Túi đựng điện thoại đeo hông BAHCO 4750-VMPH-1

Bahco 4750-VMPH-1, made of durable 1680 denier polyester, with strap for additional protection on construction sites, Velcro fastening for additional security, strap made of Velcro® material for attaching to the belt, can also be used without belt.

Made in Sweden

Túi đựng dụng cụ đeo hông BAHCO

Bahco 4750-EP-1, special design provides room for all the special tools that an electrician might have, with extremely robust design made from 1680-denier polyester, reinforced with rivets. Large compartment for long tools and additional pocket for smaller tools with easy access. Genuine leather slots on the sides, ideal for hanging long tools. Rust-proof fittings, carrying handle and chain hook for easy access to insulating tape.

Made in Sweden