Thùng dụng cụ FACOM Jet M3S

Facom Jet M3S, drawers with full extension and individual drawer retention Safety Lock System, prevents opening of several drawers at the same time. Holds 3 tool modules per drawer; extremely rugged sheet steel construction with SOFT buffers on the four corners, static load capacity 900 kg, worktop made of deep-drawn aluminium 2 mm thick reinforced with wood board 15 mm thick, fully integrated push handle, 2 side edges which retract under load with holders for 16 screwdrivers, 2 fixed edges front and back.

Central locking with folding key; 4 heavy duty wheels Ø 125 mm, 2 swivelling, 2 fixed, 1 with locking brake; epoxy-powder paintwork; side walls perforated for hanging tools on hooks or holders.

Side walls and rear wall can accommodate a variety of accessories such as holders for jerrycans, additional cabinet etc.

Tool trolley is delivered WITHOUT contents

Made in France

Thùng dụng cụ 6 ngăn FACOM JET.6NM3AS

Facom Jet M3AS, with 6 drawers, capacity of 3 tool modules per drawer; drawers are fully extendable with self-closing return spring for efficient and secure closing, extremely robust sheet steel construction with SOFT buffers on the four corners. Featuring the Safety Lock System, which prevents more than one drawer from being opened at the same time, therefore preventing the trolley from falling forwards. Reinforced worktop consisting of a 2-mm deep-drawn aluminium plate covering a 15-mm wooden board, fully integrated handle, retractable side edges with holders for eight screwdrivers. Central locking system with foldable key; 4 high-performance wheels with a diameter of 125 mm, 2 steering, 2 fixed, each with a locking brake; epoxy powder coating. Perforated sides for attaching tools using hooks or holders. Various accessories can be attached to the sides and back panel, such as holders for canisters, additional cabinets etc.

Tool trolley is delivered WITHOUT contents

Made in France

Thùng đựng dụng cụ 6 ngăn NERIOX

Sturdy steel construction with six drawers, full extension with ball-bearing-mounted guide rails, load capacity per drawer 20 kg, lockable via central locking, drawers with single lock prevents accidental opening, both end faces with square holes, with round push handle, working platform with ribbed rubber mat, vertical continuous plastic edge protection on all four corners, two fixed casters and two swivel casters with locking brakes.
Edge protection made of plastic

Made in Germany

Thùng đựng dụng cụ 6 ngăn NERIOX

Fully equipped with tools in foam inserts, workshop trolley with a sturdy steel construction and 6 drawers, full extension with ball-bearing guide rails, load capacity per drawer 20 kg, lockable via central locking, each drawer has its own lock to prevent accidental opening, both end faces with square holes, with round push handle, working platform with ribbed rubber mat, vertical continuous plastic edge protection on all 4 corners, 2 fixed castors and 2 swivel castors with locking brakes.

Made in Germany

Thùng đựng dụng cụ 6 ngăn NERIOX

Empty, Sturdy steel construction with six drawers, full extension with ball-bearing-mounted guide rails, load capacity per drawer 40 kg, lockable via central locking, drawers with single lock prevents accidental opening, both end faces with square holes, with round push handle, working platform with ribbed rubber mat, vertical continuous plastic edge protection on all four corners, two fixed casters and two swivel casters with locking brakes.

Use with trays:

440346.0100    Screwdriver set module NERIOX     
440345.0100    Combination wrench set module NERIOX     
440344.0100    Combination ratchet wrench set module NERIOX     
440342.0100    Pliers set module NERIOX     
440341.0100    Locking pliers module NERIOX     
440343.0100    Circlip pliers module NERIOX     
440348.0100    Electronic screwdriver set module VDE NERIOX     
440349.0100    Engineer's files module NERIOX     
440350.0100    Hex socket wrench set module 1/2 inch NERIOX     
440351.0100    Hex socket wrench set module 1/4-inch NERIOX     
440352.0100    Workshop kit module NERIOX     
440353.0100    Hex screwdriver set module with lateral drive NERIOX     
440354.0100    Screwdriver set module with lateral drive for TORX® NERIOX     
440355.0100    Chip set module NERIOX     
440356.0100    Locksmith's set module NERIOX     
440347.0100    Screwdriver module for TORX® screws NERIOX     
 

Made in Italy

Thùng dụng cụ 6 ngăn FACOM SL.ROLL.6GM3PB

FACOM SL.ROLL.6GM3PB Workshop roller cabinet with 6 drawers and 9 hard shell modules including tools

Drawers:

- 3 drawers 60 mm high
- 2 drawers 130 mm high
- 1 drawer 200 mm high

Internal dimensions of drawers
L x D x H: 569 x 421 x 60 / 130 / 200 mm

Containing 9 tool modules:

MOD.S161-36, 1/2" reversible ratchet, hexagon socket spanners and other accessories
MOD.AT1, 8 Protwist screwdrivers
MOD.440-1, 16 combination spanners with OGV® profile
MOD.MI7, impact tools, 7 pieces
MOD.CPEA0, 3 mechanics’ pliers
MOD.44-1, 9 open end spanners
MOD.R161-26, 1/4" reversible ratchet, hexagon socket spanners and other accessories
MOD.PR12, 2 adjustable pliers
MOD.ATX, 7 Protwist screwdrivers, for Torx® screws

Made in France

Thùng dụng cụ 6 ngăn FACOM SL.ROLL.6GM3M

FACOM SL.ROLL.6GM3M Workshop roller cabinet with 6 drawers and 9 foam modules including tools

Drawers:

- 3 drawers 60 mm high
- 2 drawers 130 mm high
- 1 drawer 200 mm high

Internal dimensions of drawers
L x D x H: 569 x 421 x 60 / 130 / 200 mm

Containing 9 tool modules:

MODM.SL161-36, 1/2" reversible ratchet, hexagon socket spanners and other accessories
MODM.AT1, 8 Protwist screwdrivers
MODM.440-1, 16 combination spanners with OGV® profile
MODM.MI7, impact tools, 7 pieces
MODM.CPEA0, 3 mechanics’ pliers
MODM.44-1, 9 open end spanners
MODM.R161-36, 1/4" reversible ratchet, hexagon socket spanners and other accessories
MODM.PR12, 2 adjustable pliers
MODM.ATXR, 7 Protwist screwdrivers for Torx® screws

Made in France