Que hàn hợp kim Tungsten OERLIKON-408401

Standard electrode with 2% lanthanum, colour pink-blue, with good ignition properties together with long service life and a wide range of applications, especially suitable for TIG direct current welding. Stock package 10 pcs Electrode grinders available upon request

Made in France

Que hàn UTP-410400

UTP 614 KB, basic double coating electrode with rutile, can be used anywhere for non-alloy steels and joint welds subject to high stress. Easy to weld, stable arc, free flowing, easily removed slag. Can be welded with alternating current, supplied in packs of 3.8 - 5.3 kg.

Made in Germany

Que hàn OERLIKON-410410

Oerlikon Spezial, basic double coating electrode with rutile, for non-alloy steels and all construction work in steel and container construction. Stable arc makes it outstanding for out-of-position welding and root welds. Can also be welded with alternating current, supplied in packs of 3.5 - 5.2 kg.

Made in Germany

Que hàn UTP-410420

UTP 611, thick coated rutile electrode, can be used anywhere for non-alloy steels. Easy to weld, has outstanding welding characteristics in all positions except for vertical-down welds. Easy ignition, even flow and very simple handling, supplied in packs of 3.8 - 6.1 kg.

Made in Germany

Que hàn BOEHLER-410450

FOX EAS 4 MA, Low-carbon core-wire-alloyed (high-alloy) austenitic electrode with rutile coating. For use in all branches of industry where similar steels have to be welded, even high-carbon and ferritic 13% chromium steels. Fine welding characteristics, excellent weldability with alternating current, self-lifting slag and moisture-resistant coating, supplied in packs of 3.6 - 5.5 kg.

Made in Germany

Que hàn UTP-410500

UTP DUR 600, Hard facing and erosion electrode for universal hard-facing on components of steel, cast steel and Mn hard steel which are subject to wear, pressure and impacts at the same time. The weld metal can only be machined by means of grinding, supplied in packs of 4.0 - 5.9 kg.

Made in Austria

Que hàn BOEHLER-410600

Böhler EML 5, coppered welding rod for welding of non-alloy and low-alloy steels, suitable for thin-walled sheets and pipes as well as for root welds. The relatively low Si content makes the welding rod particularly suitable for welds that subsequently have to be enamelled or zinc plated. Shielding gas: 100% argon. Pack of 5 kg.

Made in Germany

Que hàn BOEHLER-410620

Böhler EAS 2 IG, high-alloy TIG rod, chemically resistant for TIG arc welding of CrNi steels. For similar steels, including high carbon and ferritic 13% chromium steels. IC resistant up to 350°C operating temperature, tough down to -269°C. Shielding gas: 100% argon. Pack of 5 kg.

Made in Germany

Que hàn BOEHLER-410640

Böhler CN 23 / 12-IG, with increased ferrite content (FN ~16) in weld metal for combination of and between high-strength, non-alloy and alloy tempered steels, stainless, ferritic Cr and austenitic CrNi steels, Mn hard steels. Very good welding and flowing properties, approved for operating temperatures up to 300° C. Shielding gas: 100% argon. Pack of 5 kg.

Made in Germany

Que hàn THYSSEN-410680

T-PUT UNION Al Mg 5, Aluminium welding filler for TIG welding of Al-Mg alloys. Shielding gas: 100% argon. In 5 kg pack.

Made in Germany

Dây hàn MIG-MAG BOEHLER-410811

Böhler Union SG 3-H, non-alloy, coppered wire electrode for welding of non-alloy steels with higher strength requirements. Shielding gas (EN ISO 14175) M2, M3, C1, preferentially Argon + 18 % Co2.

Made in Italy

Dây hàn MIG-MAG BOEHLER-410830

Böhler EAS 2-IG Si, high-alloy, chemically resistant solid wire for arc welding of CrNi steels. For similar steels and ferritic 13% chromium steels. Outstanding sliding capacity and feed characteristics. IC resistant up to 350°C operating temperature, tough down to -196°C. Shielding gas: argon + max. 2.5% Co2.

Made in Germany

Dây hàn MIG-MAG THYSSEN-410890

T-PUT UNION Al Mg 5, Aluminium welding filler for MIG welding of Al-Mg alloys. Shielding gas: 100% argon.

Made in Germany