Thước thủy nivo SOLA BIG X

Very high measuring reliability even in extreme temperatures. Even more precise - thanks to higher contrast.
Darkening of the areas to the left and right of the bubble edge make the contrast between the bubble and the vial fluid more than four times better.

Designs:
074537.0100...074537.0500: 1 bubble horizontal, 1 bubble vertical
074537.0600...074537.1000: 1 bubble horizontal, 2 bubbles vertical
Features:
Accuracy 0.5 mm/m
Accuracy 0.75 mm/m (Inverted measuring)
Level with magnifying effect
X profile made of aluminium
Shock-absorbing end caps

Made in Austria

Thước thủy nivo NERIOX

In light metal alloy with unbreakable horizontal and vertical level tubes.

Designs:
074555.0100...074555.0900: gray lacquered
074555.1500...074555.2000: with holding magnets, anodised silver

Features:
Accuracy 1 mm/m

Made in Germany

Thước thủy nivo BMI ROBUST

Made of light metal with strong-walled 4-chamber profile, cross section 60 x 26 mm, red powder-coated surface, with unbreakable horizontal and vertical spirit level tube.
Features:
Accuracy 0.5 mm/m
Accuracy 0.5 mm/m (Inverted measuring)
Milled measuring surface

Made in Germany

Thước thủy nivo BMI EUROSTAR

In light metal alloy with unbreakable horizontal and vertical level tubes. The horizontal tube is marked with 4 lines for quickly measuring 2% inclines and precision readout for optimum reading of the O position.

Designs:
074580.0100...074580.0600: without magnetic clamps
074580.0750: with magnetic clamps (M)
074580.0850: with magnetic clamps
074580.1000...074580.1400: with magnetic clamps
Features:
Accuracy 0.5 mm/m
Accuracy 0.5 mm/m (Inverted measuring)

Made in Germany

Thước thủy nivo MRM

In light metal alloy, with unbreakable bubbles.

Designs:
074600.1000 ...074600.1400 : 1 bubble horizontal, 1 bubble vertical
074600.1510 : 1 bubble horizontal, 2 bubbles vertical
Features:
Accuracy 0.3 mm/m
Accuracy 0.75 mm/m (Inverted measuring)
Model with magnetic clamp
Base with V-groove

Made in Austria

Thước thủy nivo MAKE

Measure angles quickly and reliably in places that are hard to access, using the clear scale display. The integrated spirit level helps set the vertical reference.

Designs:
074720.0100: Standard
074720.0200: Is also equipped with compass needles, and so can also be used as a building compass (needle out, pencil in).

Made in Switzerland

Thước thủy nivo điện tử MAKE

Measure angles quickly and reliably in awkward places, using the clear digital display. The integrated spirit level helps set the vertical reference.

Features:
LCD display
HOLD function
Zero set of display
Integrated horizontal and vertical bubble
Automatic switchoff

Appropriate batteries:
074740.0050: 2 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).
074740.0100: 4 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).

Made in Germany

Thước thủy nivo điện tử MAKE

Angle measuring instrument, clinometer and digital laser level in a single device.

Features:
Digital display for angle and inclination
The display rotates for overhead work
Angle measurement in degrees
Inclination measurement in degrees or percentage
Signal tone in horizontal/vertical position
Saving of the measured value (HOLD)
Laser spot can be switched on

Angles:
Measuring range 0°...180°
Resolution 0.1°
Accuracy ±0.3°

Inclination:
Measuring range 4 x 90°
Resolution 0.1°
Accuracy 0.2°


Appropriate batteries:
3 pieces 055050.0300 - LR6 / 1.5 V (AA) (included in scope of delivery).

Made in Eu

Thước thủy nivo BMI LASERKING

Laser spirit level made of hollow aluminium section with milled measurement surface. The laser module consists of glass-fibre reinforced plastic cast into the aluminium section.

Features:
Accuracy 0.25 mm/m
Parallelism of laser beam 0.1 mm/m relative to the measurement surface
The horizontal spirit level is 5x more sensitive than conventional spirit levels
The device is dustproof and waterproof

Made in Germany

Thước thủy nivo điện tử LASERLINER

Version with milled faces and strong holding magnets. The display automatically rotates for overhead measurements.

Features:
Accuracy of bubble tubes 1 mm/m
Accuracy of digital display: 0°...1° / 89°...90° ±0.1°; 1°...89° ±0.2°

Backlit display
Numerical display switchable between ° degrees, % percent, mm/m
Vertical and horizontal angle display
Acoustic signal at 0°/45°/90°/135°/180°
Reference function for angle transfer
Calibration function
Cross-section 66 x 30 mm

Package content:
Supplied in transport packaging including bag.

Appropriate batteries:
2 pieces 055050.0400 - LR03 / 1.5 V (AAA) (included in scope of delivery).

Made in Eu