1900 98 68 25
sales@htgoods.com.vn
250,000+ sản phẩm từ 950+ thương hiệu và 2000+ đối tác OEM hàng đầu EU, G7
Đăng nhập để có giá tốt nhất
Tìm kiếm theo sản phẩm
432165 - Bộ kìm 4 chi tiết NERIOX
Bộ kìm sản xuất theo chuẩn DIN 4133, mạ Chrome...
Tìm kiếm theo thương hiệu
Sản phẩm gợi ý
Mã đặt hàng
Số lượng
VNĐ 0 mục hàng
Mũi taro gia công khô YAMAWA
Features A roll tap that enables tapping without lubrication on thin steel plates that have been burred and have a relatively short processing length with a size of M6 or less. Use For drilling through holes. Work Material: Low Carbon Steel, Medium Carbon Steel, High Carbon Steel, Alloy Steel, Stainless Steel.
Made in Japan
4911628.001
4911628.002
4911628.003
4911628.004
4911628.005
4911628.006
4911628.007
4911628.008
4911628.009
4911628.010
4911628.011
4911628.012
4911628.013
4911628.014
4911628.015
4911628.016
4911628.017
4911628.018
4911628.019
4911628.020
4911628.021
4911628.022
Xem thêm >>
Mũi taro Carbide gia công gang YAMAWA
Features A carbide tap suitable for threading mass-produced hard and brittle materials such as cast iron. Use Work Material: Cast Iron, Tough Cast Iron, Brass Casting.
8168498.001
8168498.002
8168498.003
8168498.004
8168498.005
8168498.006
8168498.007
8168498.008
8168498.009
8168498.010
8168498.011
8168498.012
8168498.013
8168498.014
8168498.015
8168498.016
8168498.017
8168498.018
8168498.019
8168498.020
8168498.021
8168498.022
8168498.023
8168498.024
8168498.025
8168498.026
8168498.027
8168498.028
8168498.029
8168498.030
8168498.031
8168498.032
8168498.033
8168498.034
8168498.035
8168498.036
8168498.037
8168498.038
Mũi taro Carbide YAMAWA
Features Carbide tap suitable for thread processing of mass-produced products such as aluminum casting (AC), aluminum die casting (ADC), and zinc die casting (ZDC). Use Work material: Aluminum alloy casting, zinc alloy casting.
8168512.001
8168512.002
8168512.003
8168512.004
8168512.005
8168512.006
8168512.007
8168512.008
8168512.009
8168512.010
8168512.011
8168512.012
8168512.013
8168512.014
8168512.015
8168512.016
8168512.017
8168512.018
Mũi taro lỗ cho kim loại phi từ tính YAMAWA
Features A roll tap suitable for threading non-ferrous metals (aluminum castings, aluminum die castings, brass, etc.). Use For blind hole processing. Work Material: For rolled aluminum materials, aluminum alloy castings, and zinc alloy castings.
8168584.001
8168584.002
8168584.003
8168584.004
8168584.005
8168584.006
8168584.007
8168584.008
8168584.009
8168584.010
8168584.011
8168584.012
8168584.013
8168584.014
8168584.015
8168584.016
8168584.017
8168584.018
8168584.019
8168584.020
8168584.021
8168584.022
8168584.023
8168584.024
8168584.025
8168584.026
8168584.027
8168584.028
8168584.029
8168584.030
8168584.031
8168584.032
8168584.033
8168584.034
Mũi taro xuyên lỗ cho kim loại phi từ tính YAMAWA
Features A roll tap suitable for threading non-ferrous metals (aluminum castings, aluminum die castings, brass, etc.). Use For drilling through holes. Work Material: For rolled aluminum materials, aluminum alloy castings, and zinc alloy castings.
8168585.001
8168585.002
8168585.003
8168585.004
8168585.005
8168585.006
8168585.007
8168585.008
8168585.009
8168585.010
8168585.011
8168585.012
8168585.013
8168585.014
8168585.015
8168585.016
8168585.017
8168585.018
8168585.019
8168585.020
8168585.021
8168585.022
8168585.023
8168585.024
8168585.025
8168585.026
8168585.027
8168585.028
8168585.029
8168585.030
8168585.031
8168585.032
8168585.033
8168585.034
Mũi taro mạ Titan gia công xuyên lỗ YAMAWA
Features A coated roll tap suitable for threading steel-based and non-ferrous metals. Use Work material: Low carbon steel, medium carbon steel. Through hole thread: Metric thread For drilling through holes
8168787.001
8168787.002
8168787.003
8168787.004
8168787.005
8168787.006
8168787.007
8168787.008
8168787.009
8168787.010
8168787.011
8168787.012
8168787.013
8168787.014
8168787.015
8168787.016
8168787.017
8168787.018
8168787.019
8168787.020
8168787.021
8168787.022
Mũi taro Carbide cho thép siêu cứng YAMAWA
Features Ideal for tapping 55-60 (Max65) HRC of SKD material and pre-hardened steel. Uses ultrafine cemented carbide with excellent wear resistance and impact resistance. The runout accuracy of the entire tap and the roundness of the shank are improved. The thread processing length is "outer diameter dimension X1.5 or less", and the bite is 5P in consideration of the life. For the prepared hole diameter, we recommend the maximum inner diameter of 6H female thread. Use Work material: Heat-treated steel.
8168830.001
8168830.002
8168830.003
8168830.004
8168830.005
8168830.006
8168830.007
8168830.008
8168830.009
8168830.010
Mũi taro ren HSS hệ inch YAMAWA
Features It is a tap for unified screws and is used in all directions. Use For drilling through holes. Work material: Medium carbon steel.
8168847.001
8168847.002
8168847.003
8168847.004
8168847.005
8168847.006
Features The groove on the cutting edge side of the bite part is cut diagonally so that chips are sent forward, so there is no obstacle due to chips and it is ideal for passing holes. Since the straight groove is shallow, the strength is high. Use For drilling through holes. Work Material: Medium carbon steel, copper alloy, aluminum alloy.
8168848.001
8168848.002
8168848.003
8168848.004
8168848.005
8168848.006
8168848.007
Mũi taro ren HSS YAMAWA
Features The groove on the cutting edge side of the bite part is cut diagonally so that chips are sent forward, so there is no obstacle due to chips and it is ideal for passing holes. Since the straight groove is shallow, the strength is high. Use For drilling through holes. Work Material: Medium Carbon Steel, Cast Steel, Brass, Rolled Aluminum, Aluminum Alloy Casting, Die Casting.
8168852.001
8168852.002
8168852.003
8168852.004
8168852.005
8168852.006
8168852.007
8168852.008
8168852.009
8168852.010
8168852.011
8168852.012
8168852.013
8168852.014
8168852.015
8168852.016
8168852.017
8168852.018
8168852.019
8168852.020
8168852.021
8168852.022
8168852.023
8168852.024
8168852.025
8168852.026
8168852.027
8168852.028
8168852.029
8168852.030
8168852.031
8168852.032
8168852.033
8168852.034
8168852.035
8168852.036
8168852.037
8168852.038
8168852.039
8168852.040
8168852.041
8168852.042
8168852.043
8168852.044
8168852.045
8168852.046
8168852.047
8168852.048
8168852.049
8168852.050
8168852.051
8168852.052
Mũi taro gia công gang YAMAWA
Features Since it is suitable for hard and brittle materials such as cast iron, it wears relatively quickly, so it is an oversized tap that allows for the amount of wear. Use Work material: Cast iron.
8200262.001
8200262.002
8200262.003
8200262.004
8200262.005
8200262.006
8200262.007
8200262.008
8200262.009
8200262.010
8200262.011
8200262.012
8200262.013
8200262.014
8200262.015
8200262.016
8200262.017
8200262.018
8200262.019
8200262.020
8200262.021
8200262.022
Mũi taro lỗ cho thép YAMAWA
Features A roll tap suitable for threading steel (carbon steel, alloy steel, ordinary steel). Use For blind hole processing. Work material: For low carbon steel and medium carbon steel.
8375078.001
8375078.002
8375078.003
8375078.004
8375078.005
8375078.006
8375078.007
8375078.008
8375078.009
8375078.010
8375078.011
8375078.012
8375078.013
8375078.014
8375078.015
8375078.016
8375078.017
8375078.018
8375078.019
8375078.020
8375078.021
8375078.022
8375078.023
8375078.024
8375078.025
8375078.026
8375078.027
8375078.028
8375078.029
Mũi taro xuyên lỗ cho thép YAMAWA
Features A roll tap suitable for threading steel (carbon steel, alloy steel, ordinary steel). Use For drilling through holes. Work material: For low carbon steel and medium carbon steel.
8375079.001
8375079.002
8375079.003
8375079.004
8375079.005
8375079.006
8375079.007
8375079.008
8375079.009
8375079.010
8375079.011
8375079.012
8375079.013
8375079.014
8375079.015
8375079.016
8375079.017
8375079.018
8375079.019
8375079.020
8375079.021
8375079.022
8375079.023
8375079.024
8375079.025
8375079.026
8375079.027
8375079.028
8375079.029
Mũi taro mạ Titan gia công lỗ YAMAWA
Features A coated roll tap suitable for threading steel-based and non-ferrous metals. Use Work material: Low carbon steel, medium carbon steel. For blind hole machining
8375190.001
8375190.002
8375190.003
8375190.004
8375190.005
8375190.006
8375190.007
8375190.008
8375190.009
8375190.010
8375190.011
8375190.012
8375190.013
8375190.014
8375190.015
8375190.016
8375190.017
8375190.018
8375190.019
8375190.020
8375190.021
8375190.022
Mũi taro gia công Inox YAMAWA
Features Suitable for chrome steel and molybdenum steel, including stainless steel, which is a material that is extremely work-hardened and sticky. Use Work Material: Stainless Steel, Alloy Steel, Medium / High Carbon Steel.
8375653.001
8375653.002
8375653.003
8375653.004
8375653.005
8375653.006
8375653.007
8375653.008
8375653.009
8375653.010
8375653.011
8375653.012
8375653.013
8375653.014
8375653.015
8375653.016
8375653.017
8375653.018
8375653.019
8375653.020