Máy siết bulong khí nén 3/8 inch HAZET 9011M

Maximum loosening torque: 461 Nm

Extremely compact construction enables working in areas with restricted access

One-hand operation for right and left handed operators

Exhaust air is guided through the handle downwards

Reduced vibrations

Easy handling

Extra short – only 92 mm

Single hammer striking mechanism

Made in Germany

Máy siết bulong khí nén HAZET

360° adjustable exhaust, completely enclosed head prevents the entry of swarf, etc. Cold-insulated handle, clockwise/anti-clockwise rotation. Must be operated with oiled air. Supplied with plug-in nipple to European standard (Cejn 320).

Designs:
9020P-2: for hand retightening with torques > 60 Nm
9021P-2: for hand retightening with torques > 260 Nm
9022P-2: for hand retightening with torques > 400 Nm

Appropriate accessories:
479600 Swivel joint VARIACOR^®, 770000 Service unit CEJN, 770005 Service unit CEJN

Made in Germany

Máy siết bulong khí nén tay ngang FUTURO

Universal tool for efficient screw assembly, also for work in hard-to-reach areas; adjustable for clockwise/anticlockwise operation. Cold-insulated soft handle, air exhaust and air supply connection can be rotated 360°. Must be operated with oiled air.
Appropriate accessories:
770000 Service unit CEJN, 770005 Service unit CEJN

Made in Germany

Máy siết bulong khí nén tay ngang BAHCO

Designs:
477260.0100 BP700: extremely compact mini-ratchet, composite housing, force control. Must be operated with oiled air
477260.0200 BP820: low-vibration, rubber handle, speed control, air exhaust and air supply connection can be rotated. Must be operated with oiled air

Appropriate accessories:
770000 Service unit CEJN, 770005 Service unit CEJN

Made in Sweden

Máy siết bulong khí nén MANNESMANN DEMAG-477350

good power-to-weight ratio and minimal return torque, powerful, balanced impact, thanks to impact strength control, versatile uses, long-lived industrial quality, maintenance-friendly. 4 throttle stages, air exhaust through the handle; not oil-free. Supplied with percussion fat and oil bottle.

Made in Germany

Máy siết bulong khí nén 3/4 inch HAZET 9013 M

Cold-insulated handle, exhaust air channeled down through the handle, reduced vibration. Supplied with plug-in nipple to European standard (Cejn 320). Must be operated with oiled air.

Designs:
9013 M: Powerful twin hammer mechanism, max. loosening torque 1890 Nm

Made in Germany

Máy siết bulong khí nén HAZET 9013LGTT TwinTurbo

HAZET 9013LGTT TwinTurbo, long service life and high efficiency in industrial and automotive applications. Compact yet extremely powerful thanks to HAZET Twin Turbo technology with double hammer mechanism. Long spindle (186 mm) enables access to low-lying fittings. Two-stage clockwise rotation, single-stage anti-clockwise rotation, cold-insulating handle guides exhaust air out of the bottom of the handle. Single-handed operation for right- and left-handed users. Low vibration, easy to operate, includes handle.

Appropriate accessories:
479600 Swivel joint VARIACOR^®

Made in Germany

Máy siết bulong khí nén FACOM

Two-component housing (aluminium/plastic), 360° rotatable air connection prevents the hose from twisting, double impact mechanism with automatic lubrication for high reliability, adjustable when loosening and tightening, one-hand switch.
Type NS.1500F2 very compact and light, powerful for its size
Type NS.3000F with titanium housing, new generation monobloc motor for less maintenance, with double hammer mechanism, stepless pressure switch, rotatable air connection for freedom of movement, knurled wheel to change the direction of rotation. Soft buffers protect the working environment from bumps and scratches

Made in France

Máy siết bulong khí nén FUTURO-477400

Optimal impact mechanism (twin clutch) for maximum reliability and added power with low weight; adjustable torque; reversible clockwise/anticlockwise; with comfort handle, reduces vibrations and insulates against cold. 4-step impact strength control.

Made in Germany

Máy siết bulong khí nén HAZET-477415

HAZET 9013TT TwinTurbo, long service life and high efficiency in industrial and automotive applications. Compact yet extremely powerful thanks to HAZET Twin Turbo technology with double hammer mechanism. Two-stage clockwise rotation, single-stage anti-clockwise rotation, cold-insulating handle guides exhaust air out of the bottom of the handle. Single-handed operation for right- and left-handed users. Low vibration, easy to operate, includes handle.

Made in Germany

Máy siết bulong khí nén BAHCO

Composite housing, double hammer mechanism, force control, rotating connector and air exit in the handle. Must be operated with oiled air.

Made in Sweden

Máy siết bulong khí nén BOSCH-477470

with automatic cut-off. Extremely light impulse driver with CLEAN technology, oil-free. Ergonomic, fibre-reinforced polyamide housing for optimal handling, optimised cooling, high speed thanks to rugged, high-performance motor with double chamber, wear-free shut-off clutch, which reacts to mechanical centrifugal force. Clockwise / counterclockwise operation, largest torque in counterclockwise operation, to make loosening of screws easy. Torque of the impulse driver can be adjusted from the outside. Supplied with suspension loop, hexagonal recess and hose nipple.

Made in Germany

Máy siết bulong khí nén CLECO-477475

with torque determining, highly precise shut-off with a tolerance in the range of +/- 10% for Six Sigma. Reduced amount of maintenance required minimises downtimes: The new Cleco H series makes up to 500,000 tightening cycles possible prior to the first servicing. 50% less air consumption when idling on account of the innovative flyweight governor that enables full load output only under load; the powerful 3-chamber air motor reduces your tightening time thanks to boosted motor torque. The reserve oil continues flowing automatically, with integrated fill level indicator. Filling the reserve tank can be accomplished in a few seconds during the course of maintenance. Q-types with quick-change chuck. Air connection from the bottom.

Made in Germany

Máy siết bulong khí nén CLECO-477476

with torque determining, highly precise shut-off with a tolerance in the range of +/- 10% for Six Sigma. Reduced amount of maintenance required minimises downtimes: The new Cleco H series makes up to 500,000 tightening cycles possible prior to the first servicing. 50% less air consumption when idling on account of the innovative flyweight governor that enables full load output only under load; the powerful 3-chamber air motor reduces your tightening time thanks to boosted motor torque. The reserve oil continues flowing automatically, with integrated fill level indicator. Filling the reserve tank can be accomplished in a few seconds during the course of maintenance. Q-types with quick-change chuck. Air connection from the top.

Made in Germany

Máy siết bulong khí nén CLECO-477480

Offset driver with Clecomatic® - shut-off clutch with square drive side (we provide a 60-month guarantee for this part). New design and advanced materials achieve a weight reduction of up to 19%, subject to configuration. Adjustable switch lever is located next to the starter in order to provide unadulterated single-hand control and flexibility for left- and right-handers. Soft-Touch grip integrated in the re-designed handle in order to provide maximum protection against temperature, chemicals, vibrations and slipping. For the operator this means enhanced ergonomics and measurably less fatigue. Air connection: 1/8" NPT

Made in Usa