Máy siết bulong khí nén 3/8 inch HAZET 9011M

Maximum loosening torque: 461 Nm

Extremely compact construction enables working in areas with restricted access

One-hand operation for right and left handed operators

Exhaust air is guided through the handle downwards

Reduced vibrations

Easy handling

Extra short – only 92 mm

Single hammer striking mechanism

Made in Germany

Máy siết bulong khí nén 1/2 inch HAZET 9012MT

Modern: ultra compact design (100 mm) optimised for working in confined spaces with efficient exhaust ducting through the handle down and an improved response torque of the air engines

High quality: the low-vibration impact wrench with cold-insulated handle impresses with its simple one-handed operation for right and left-handed users - ideal for longer work in one piece

Powerful: the air wrench with high-performance double hammer impact mechanism has a release torque of max. 1400 Nm and uses a square 12.5 mm output with quiet sound power level of 102 dB

Quality: Hazet is one of the leading manufacturers of quality tools for professional use and has more than 150 years of experience in development and production

Box contents: 1 x Hazet 9012MT compressed air impact wrench including coupling plug: nominal width 7.2 mm, recommended hose diameter: 10 mm, device dimensions: 100 x 67 x 167 mm, net weight: 1.32 kg

Made in Germany

Máy siết bulong khí nén HAZET 9022-360

HAZET 9022-360, high-performance ratchet screwdriver suitable for cramped conditions, 30% quieter thanks to the ability to reduce the running noise using a selection switch. Suitable for manual tightening at a maximum torque of 500 Nm, extremely flat head with no protruding edges thanks to the switchover lever, release trigger can be rotated 360°, adjusting ring on the handle can be used to switch between clockwise and anti-clockwise, head made of heat-treated special steel, cold-insulating handle.

Appropriate accessories:
479600 Swivel joint VARIACOR^®
479605 Mini oiler HAZET

Made in Germany

Máy siết bulong khí nén HAZET 9022P-XLG

HAZET 9022P-XLG, extra-long, slim ratchet screwdriver for obstructed and hard-to-reach areas. Can withstand high manual tightening forces up to 400 Nm, low vibration, particularly suitable for applications such as assembling and disassembling chain cases, cold-insulating handle.

Appropriate accessories:
479600 Swivel joint VARIACOR^®
479605 Mini oiler HAZET

Made in Germany

Máy siết bulong khí nén HAZET 9022SR-1

HAZET 9022SR-1, 30% higher torque and approx. 3x higher speeds than standard devices. Maximum safety at work thanks to a response-free striking mechanism, easy on the joints, suitable for manual tightening at a maximum torque of 270 Nm. High-performance pin striking mechanism, clockwise and anti-clockwise rotation, cold-insulating handle.

Made in Germany

Máy siết bulong khí nén tay ngang FUTURO

Universal tool for efficient screw assembly, also for work in hard-to-reach areas; adjustable for clockwise/anticlockwise operation. Cold-insulated soft handle, air exhaust and air supply connection can be rotated 360°. Must be operated with oiled air.
Appropriate accessories:
770000 Service unit CEJN, 770005 Service unit CEJN

Made in Germany

Máy siết bulong khí nén tay ngang BAHCO

Designs:
477260.0100 BP700: extremely compact mini-ratchet, composite housing, force control. Must be operated with oiled air
477260.0200 BP820: low-vibration, rubber handle, speed control, air exhaust and air supply connection can be rotated. Must be operated with oiled air

Appropriate accessories:
770000 Service unit CEJN, 770005 Service unit CEJN

Made in Sweden

Máy siết bulong khí nén 1/2 inch HAZET 9012M / 9012M-1

HAZET 9012 M/9012 M-1, highly compact pneumatic impact wrench with large hammer mechanism. For working in very confined spaces. Three-stage clockwise rotation, single-stage anti-clockwise rotation, cold-insulating handle that guides exhaust air out through the bottom of the handle. Single-handed operation for right- and left-handed users. Low vibration, easy to operate, ergonomic shape.

Designs:
9012 M: Short version — Housing without drive, only 92 mm long
9012 M-1: Extra short version — Housing without drive, only 80 mm long

TAG: 9012M, 9012M1

Made in Germany

Máy siết bulong khí nén thân gập thông minh HAZET 9012 ATT

HAZET 9012 ATT, extremely slim pneumatic impact driver with high-performance double-hammer impact mechanism. Handle/trigger adjustable around its own axis for optimum handling — allows actuation in any position. Innovative swivel mechanism for a broader range of applications guarantees excellent access to hard-to-reach places, such as when actuating calliper fittings. Cold-insulating handle, one-hand operation for right- and left-handed users. Low vibration, easy to operate, ergonomic shape.
Appropriate accessories:
479600 Swivel joint VARIACOR^®
479605 Mini oiler HAZET

Made in Germany

Máy siết bulong khí nén HAZET 9012 MTT / 9012 TT

HAZET 9012 TwinTurbo, long service life and high efficiency in industrial and automotive applications. Compact yet extremely powerful thanks to HAZET Twin Turbo technology with double hammer mechanism. Two-stage clockwise rotation, single-stage anti-clockwise rotation, cold-insulating handle guides exhaust air out of the bottom of the handle. Single-handed operation for right- and left-handed users. Low vibration, easy to operate and ergonomic shape.

Designs:
9012 MTT: Extra short version — Housing without drive, only 110 mm long
9012 TT: Standard version — Housing without drive, 128 mm long

TAG: 9012MTT, 9012TT

Made in Germany

Máy siết bulong khí nén MANNESMANN DEMAG-477350

good power-to-weight ratio and minimal return torque, powerful, balanced impact, thanks to impact strength control, versatile uses, long-lived industrial quality, maintenance-friendly. 4 throttle stages, air exhaust through the handle; not oil-free. Supplied with percussion fat and oil bottle.

Made in Germany

Máy siết bulong khí nén 1/2 inch HAZET 9012 SPC

Ergonomically shaped, cold-insulated handle, exhaust air channeled down through the handle, reduced vibration. Supplied with plug-in nipple to European standard (Cejn 320). Must be operated with oiled air.

Made in Germany

Máy siết bulong khí nén 3/4 inch HAZET 9013 M

Cold-insulated handle, exhaust air channeled down through the handle, reduced vibration. Supplied with plug-in nipple to European standard (Cejn 320). Must be operated with oiled air.

Designs:
9013 M: Powerful twin hammer mechanism, max. loosening torque 1890 Nm

Made in Germany

Máy siết bulong khí nén HAZET 9013LGTT TwinTurbo

HAZET 9013LGTT TwinTurbo, long service life and high efficiency in industrial and automotive applications. Compact yet extremely powerful thanks to HAZET Twin Turbo technology with double hammer mechanism. Long spindle (186 mm) enables access to low-lying fittings. Two-stage clockwise rotation, single-stage anti-clockwise rotation, cold-insulating handle guides exhaust air out of the bottom of the handle. Single-handed operation for right- and left-handed users. Low vibration, easy to operate, includes handle.

Appropriate accessories:
479600 Swivel joint VARIACOR^®

Made in Germany

Máy siết bulong khí nén HAZET-477380

HAZET 9014 P-1/9014 PS-1, extremely powerful pneumatic impact wrench for the most challenging applications. Direct hammer striking mechanism ensures high power yet low vibration. Three-stage clockwise and anti-clockwise rotation, operation optimised on both sides for left- and right-handed operation, optimised haptics, easy to operate. Drive with hole for securing tools with pins and socket wrench retaining ring. Cold-insulating handle guides exhaust air out through the bottom of the handle, air supply can be connected to the handle at the bottom or rear.

Made in Germany

Máy siết bulong khí nén FACOM

Two-component housing (aluminium/plastic), 360° rotatable air connection prevents the hose from twisting, double impact mechanism with automatic lubrication for high reliability, adjustable when loosening and tightening, one-hand switch.
Type NS.1500F2 very compact and light, powerful for its size
Type NS.3000F with titanium housing, new generation monobloc motor for less maintenance, with double hammer mechanism, stepless pressure switch, rotatable air connection for freedom of movement, knurled wheel to change the direction of rotation. Soft buffers protect the working environment from bumps and scratches

Made in France

Máy siết bulong khí nén kèm khẩu vặn FACOM NSS.J8.PB

The FACOM Stubby Impact socket wrench set not only contains a selection of high-quality impact socket wrenches, but also includes the powerful NS.1600FPB impact wrench. The set delivers everything you need to tighten or loosen screws and nuts effortlessly and precisely.

Properties:

• High quality impact socket wrench set with 8 different sizes
• Robust, durable construction for use with impact screwdrivers
• Special socket wrench design for excellent power transmission
• Includes powerful NS.1600FPB impact screwdriver with various torque settings
• Storage case for safe storage and easy transport

Made in France

Máy siết bulong khí nén FUTURO-477400

Optimal impact mechanism (twin clutch) for maximum reliability and added power with low weight; adjustable torque; reversible clockwise/anticlockwise; with comfort handle, reduces vibrations and insulates against cold. 4-step impact strength control.

Made in Germany

Máy siết bulong khí nén HAZET-477415

HAZET 9013TT TwinTurbo, long service life and high efficiency in industrial and automotive applications. Compact yet extremely powerful thanks to HAZET Twin Turbo technology with double hammer mechanism. Two-stage clockwise rotation, single-stage anti-clockwise rotation, cold-insulating handle guides exhaust air out of the bottom of the handle. Single-handed operation for right- and left-handed users. Low vibration, easy to operate, includes handle.

Made in Germany