Máy khò nhiệt STEINEL - HL 1920 E

General purpose device with 9 heating and 3 dry air stages. Ideal for removing foils, welding plastics, shrink tubing, welding foils, forming, soldering and more. The large setting wheel for temperature adjustment can be comfortably operated with the thumb while working. Blower control via 3-stage operating switch (150 l/min, 300 l/min, 500 l/min). Cold setting for quick cooling when changing the nozzle. Electronic temperature control from 50° C – 600° C in 9 stages. Thermal fuse, ergonomic soft-grip handle, soft-grip base for non-slip grip, air inlet with mesh screen; for manual and standby mode.

ĐÓNG GÓI hộp carton, KHÔNG bao gồm phụ kiện

Phụ kiện có thể mua kèm:

472515 Accessories STEINEL
472520 Plastic welding wiret

tag: HL1920E

Made in Czech republic

Máy khò nhiệt STEINEL - HL 1620 S

The HL 1620 S hot air tool helps to overcome everyday challenges with effortless ease. Adjustable in two stages, this all-rounder works in a temperature range of 300 or 500 °C, comes with an optimised weight balance for fatigue-free work as well an integrated thermal cut-out. And all weighing in at only 670 grams. Second to none!

Made in Romania

Máy khò nhiệt STEINEL HG2320E

Powerful, electronically controlled professional hot air gun with continuously variable control of temperature and airflow. The extremely high power makes it suitable for all hot air applications. The precise temperature in 10°C stages display means the tool can also be used with temperature-critical materials. LCD display of temperature and speed, button for selecting 4 pre-set programs, saving button to change pre-set programs, double overheating protection with thermostat and thermal fuse, air inlet with mesh screen to protect from dirt, soft-grip handle and soft-grip base for stability.

ĐÓNG GÓI hộp carton, KHÔNG bao gồm phụ kiện

Phụ kiện có thể mua kèm:

472515 Accessories STEINEL
472520 Plastic welding wiret

Sản phẩm thay thế đóng gói dạng hộp, bao gồm phụ kiện:

472512 Hot air blower set STEINEL

tag: HG2320E

Made in Romania

Máy khò nhiệt chạy pin STEINEL MH5

The compact mobile heat MH 5 provides four application-specific programs and delivers hot air in record time. It heats up in less than four seconds, reaching 500°C after a mere 20 seconds. Selected digitally, the temperature can be set to between 50°C and 500°C in 10°C steps, providing heat with pinpoint precision to suit any application. The airflow rate is also digitally controlled in six stages (up to 300 l/min). Temperature and airflow rate are kept under control at all times on the display. The high-performance 18 V CAS rechargeable battery permits versatile, cordless use – ideal, for instance, when it comes to making spur-of-the-moment repairs to HGV tarpaulin sides or for quickly patching roof membranes. The cordless hot air tool is supplied in a practical storage case – with an 8.0 Ah CAS rechargeable battery and charger.

Made in Germany

Bộ máy khò nhiệt STEINEL HG2320E SET

Powerful, electronically controlled professional hot air gun with continuously variable control of temperature and airflow. The extremely high power of the HG 2310 LCD makes it suitable for all hot air applications. The precise temperature in 10°C stages display means the tool can also be used with temperature-critical materials. LCD display of temperature and speed, button for selecting 4 pre-set programs, setting button to change pre-set programs, double overheating protection with thermostat and thermal fuse, air inlet with mesh screen to protect from dirt, soft-grip handle and soft-grip base for stability. 

Bao gồm phụ kiện: 50 mm wide jet nozzle, reflector nozzle, 9 mm reducing nozzle and shrink sleeves, in plastic carrying case.

Phụ kiện có thể mua thêm:

472515 Accessories STEINEL
472520 Plastic welding wiret

Máy KHÔNG bao gồm phụ kiện, chi phí thấp hơn:
472502 Electronic hot air gun STEINEL

tag: HG2320ESET

Made in Germany

Máy khò nhiệt DEWALT D26414

Hot air pistol with overload protection for long service life, steplessly adjustable temperature and saving of temperature settings for constant temperature requirements. Simple control of all settings via Digital-Display, powerful 2000 watt heating element with optimum cooling, static insert through secure, vertical stand position, easy handling with light and convenient design. Scope of supply: Cone nozzle, flat nozzle, paint scraper.

Made in Eu

Máy khò nhiệt hàn que nhựa STEINEL HL Stick

Steinel HL Stick, compact hot air blower for precise, pinpoint heating. Handy, non-slip and lightweight, hand-held and stationary unit in one, extremely stable, with integrated LED work light. Temperature range without nozzle, max. 400°C, with reducer nozzle 7 mm, max. 500°C. The compact, all-round unit is supplied with 4 attachment nozzles: The reducer nozzle with a diameter of 7 mm raises the temperature of the airflow to 500°C for concentrated heating. The precision nozzle (4.5 mm diameter) enables workpieces to be precisely machined. And the two reflector nozzles (10 mm and 40 mm diameter) are able to process shrink-on hoses of all sizes - selectively to wide-ranging.

Scope of delivery: Hot air gun HL Stick, reduction nozzle 7 mm, reduction nozzle with reflector guard, reflector nozzle 40 mm, reflector nozzle 10 mm

Made in Czech republic

Máy khò nhiệt STEINEL - HL 1821 S

Handy entry-level model with two heating stages and high air volume for all hot air applications. Reducing nozzles not included. For drying, welding, moulding, loosening, smoothing, lighting barbecues, welding tarpaulin, removing paint, removing weeds, shrinking cables, defrosting pipes, moulding plastic and more. Built-in thermal fuse protects against overheating. Provided in box.

Appropriate accessories:
472515 Accessories STEINEL

tag: HL1821S

Made in Germany

Máy khò nhiệt STEINEL - HG 2120 E

Carwrapper-edition, specifically suited for vehicle wrapping thanks to its greater manoeuvrability; brush motor, designed for 750 operating hours. Integrated thermal fuse against overheating. 3-stage blower, from 150 – 500 l/min. Easy temperature adjustment from 80 – 630 °C by thumbwheel, temperature display indicated on thumbwheel in 9 steps. Ergonomic handle with soft inlay for work safety with one hand. Non-slip base and can be hung, cable length of 7.50 m, in case.

tag: HG2120E

Made in Romania

Máy khò nhiệt cho dây chuyền sản xuất STEINEL HG 2420 E

For professional applications, with infinite temperature setting and 2-level airflow adjustment cuts a powerful figure at any job site. Greater protection against dust and moisture, sturdier design as well as better insulated power cord to H07. Ergonomic handle with soft inlay for work safety. The integrated fine-dust filter protects internal components in dusty environments. The outlet nozzle is adapted for attaching screw-on professional nozzles. Delivered in case.

Made in Romania

Máy khò nhiệt cho dây chuyền sản xuất STEINEL HG 2620 E

The ceramic heaters' temperature can be infinitely varied in 10 °C steps by joystick. Airflow rate is also continuously adjustable. Without power cord, it weighs in at just 840 g. Suitable for use on construction sites: greater protection against dust and moisture, sturdier design as well as better insulated power cord to H07. The residual-heat indicator ensures maximum working safety, the integrated thermal cut-out prevents overheating. An integrated fine dust filter, the ergonomically shaped handle with soft inlay and the magnesium guard sleeve ensure work safety.

Delivered in case.

Made in Romania

Máy khò nhiệt WELDY

Weldy HG 330-A, a powerful and easy-to-use hot air blower. This convenient hot-air dryer can be used for a plethora of tasks, e.g. full car wrapping, films, plastic welding tasks, cable heat shrinking, loosening screws, ski repair tasks and forming pipe flanges. The user can set up to five working temperatures ranging between 80°C and 650°C and store these in five programmable memory slots. The settings can be adjusted at any time. Thanks to the digital temperature regulation feature, the temperature setting selected is then fixed and remains constant — irrespective of the air flow setting and the nozzle accessory in use.

Phụ kiện đi kèm:
472555.0100 Pipe nozzle dia. 6 mm, pipe nozzle dia. 20 mm, spoon reflector, wide-slot nozzle 25 mm, pressure roller, in cardboard box

Có thể mua thêm phụ kiện:
472570 Accessories WELDY

Made in Eu

Máy khò nhiệt WELDY HG 330-S

Weldy HG 330-S, powerful hot-air dryer with infinitely adjustable temperature between 80°C and 600°C plus dual-setting blower. Whether it is used for removing dyes or paints, applying and shrinking plastic films, restoring plastic parts using hot air or defrosting pipes — this handheld hot-air device makes tasks involving hot air easy thanks to its excellent heat and blowing power, low weight and ergonomic design.

Bao gồm phụ kiện:
472565.0100 Pipe nozzle dia. 20 mm, spoon reflector, glass protection nozzle, in a cardboard box

Phụ kiện có thể mua bổ sung:
472570 Accessories WELDY

Made in Eu

Máy hàn nhựa LEISTER TRIAC ST

A highly proven tool with continuously variable control of temperature. for welding, forming and shrinking of plastic plates, foils, pipes and profiles. Cooled protective tubing, electronically protected heating element, automatic motor shut off with minimum carbon level. Multiple brush replacements possible, suitable for continuous operation.

Đóng gói dạng hộp nhựa, KHÔNG bao gồm phụ kiện

Phụ kiện mua thêm:

472610 Accessories LEISTER

Made in Switzerland

Máy hàn nhựa LEISTER TRIAC AT

intelligent, rugged hot air device for welding and shrinking cables. Ergonomic design, safe operation with proven ""e-Drive" operating unit. Clearly visible information on the large display, set temperature levels off automatically, voltage fluctuations are compensated. The thermal probe in front of the heating element guarantees precise temperature. Air volume can be adjusted independent of the temperature. Supplied in plastic case, without accessories.

Đóng gói dạng hộp nhựa, KHÔNG bao gồm phụ kiện

Phụ kiện mua thêm:

472610 Accessories LEISTER

Made in Switzerland