Máy đột dập tay gạt MÄDER

with rack, therefore constant pressure over the entire stroke, direct force transfer enables sensitive pressing; ram secured against turning, stroke setting via adjusting screw or stop, lever home position adjustable 360°, long, honed, high precision ram guide.

Made in Germany

Máy đột dập tay gạt MÄDER

Mäder HP 40, classic watchmaker's rack and pinion press. The small, compact design makes it possible to carry out precision work with high tactility and dexterity in the lower force segment. The table hole is aligned with the ram hole to enable the tool to be changed quickly and precisely. This is particularly advantageous for producing small batches or individual components. Infinitely adjustable stroke length and freely positionable hand lever.

Made in Germany

Máy đột dập tay gạt FUTURO

Factory-set pressure point; press head easily height-adjustable; hardened and ground ram; long, honed, high precision ram guide; ground press table.
Toggle presses reach their rated force only at the end of the ram stroke. With the toggle lever mechanism, a relatively low force of about 150 N is enough to produce the high working pressure of the press. For this reason they are used in applications where the full force of the press is only required for a short distance at the end of the stroke, e.g. in component assembly, punching, riveting, embossing, gluing etc.

Appropriate spare parts:
370572 Return spring FUTURO

Made in Germany

Máy đột dập tay gạt MÄDER

For punching, bending, embossing, assembly, pressing, straightening, riveting, bonding; suitable for profiled strips, assembly work, etc.; simple hand operation, precise end position repetition, standard table with fine height adjustment, reading 0.1 mm, height adjustment with quick-action lever. Supplied with support plate and 2 Allen keys.

Designs:
370610.0100 KP 2.1 N -
370610.0200 KP 2.1 N-vario Advantage of type vario: Optimal linear force transfer over the entire stroke, e.g. pressing force 30 kN with 6 mm stroke; punch stroke adjustable.

Appropriate accessories:
371030 Hole punch
371040 Die
371050 Punch sleeve
371060 Stripper
371070 Slot punch
371080 Slot die
371090 Square hole punch
371100 Square die
371110 Tool magazine
371120 Material stop
371140 Radius punch cutter
371160 Band metal shearing tool

Made in Germany

Máy đột dập tay gạt MÄDER

For punching, bending, embossing, assembly, pressing, straightening, riveting, bonding; suitable for sheet metal working; simple hand operation, precise end position repetition, standard table with fine height adjustment, reading 0.1 mm, height adjustment with quick-action lever. Supplied with support plate and 2 Allen keys.

Designs:
370620.0100 KP 2.1 W
370620.0200 KP 2.1 W-vario Advantage of type vario: Optimal linear force transfer over the entire stroke, e.g. pressing force 30 kN with 6 mm stroke; punch stroke adjustable.

Appropriate accessories:
371030 Hole punch
371040 Die
371050 Punch sleeve
371060 Stripper
371070 Slot punch
371080 Slot die
371090 Square hole punch
371100 Square die
371110 Tool magazine
371120 Material stop
371140 Radius punch cutter
371160 Band metal shearing tool

Made in Germany