Móc cẩu xoay 360° RUD

DIN 5691 / EN 1677 1.6541, forged, heat-treated for high strength The rotatable safety hoist ring consists of a screw-in journal and a freely rotating ring. This allows the ring to always be aligned in the correct pulling direction, preventing unintended turning of the fastening thread. Make sure that the ring is free to rotate when the unit is screwed in.

Made in Germany

Móc cẩu xoay 360° RUD

EN1677 1.6541, forged, heat-treated for high strength Star-shaped, making it easy to distinguish from DIN 582 ring nuts. Be sure to observe the user instructions. Make sure that the ring is free to rotate when the unit is screwed in.

Made in Germany

Móc cẩu inox xoay 360° RUD

1.4462, forged Pentagonal, making it easy to distinguish from DIN 580 lifting eyebolts. High resistance to seawater. Ideal for the chemical industry. Make sure that the ring is free to rotate when the unit is screwed in.

Made in Germany

Ma ní RUD

1.6541, forged, heat-treated for high strength Star-shaped, making it easy to distinguish from DIN 580 hoist rings. Other threads also available upon request.

Made in Germany

Ma ní RUD

EN1677 1.6541, forged, heat-treated for high strength Star-shaped, making it easy to distinguish from DIN 582 ring nuts. Other threads also available upon request.

Made in Germany

Móc cẩu xoay 360° RUD

High-strength suspension eye For loads which are turned and rotated. Can be rotated through 360° under load. Other thread lengths also available upon request.

Made in Germany

Ma ní RUD

Thanks to a unique spring mechanism, the RUD ACP-TURNADO always turns immediately in the optimum direction of force. This prevents the load from dropping down jerkily. The worst-case position with its high transverse loads is prevented. Maximum force transmission in all possible directions. - No fading - Unique RUD spring mechanism - Higher load capacities than comparable Sizes. - Bracket rotatable by 360° - Bracket can be swivelled by 180° Other sizes available upon request.

Made in Germany

Điểm nâng để hàn RUD

Loadable from all directions Tempered base body, therefore wear-resistant Patented markings for easy determination for withdraw of service

Made in Germany

Móc cẩu xoay 360° RUD VLBG-PLUS

Can be rotated by 360° and adjusted in direction of pull, bracket can be pivoted 180°, full working load limit in any direction of load, surface powder-coated in ICE-PINK®.

Specially designed ICE-Bolt (M8-M24) and with it an on average 45% higher working load limit than with the VLBG predecessor model (in the M8-M30 sizes). Use only the ICE-Bolts/screws supplied with the item. Other thread lengths also available upon request.

Made in Germany

Móc cẩu hàn RUD

Suspension ring pivots 180° 100% WLL at 90° in the load ring plane possible Suspension ring & weld-on-block of the VLBS-U are undetachable (16t without spring)

Made in Germany

Móc cẩu xoay 360° RUD

High-strength suspension eye Double ball-bearing support for smooth tilting, turning and rotating. Can even be rotated under full load at 90° to direction of bolting. Not suited to continuous rotation under full load Other thread lengths also available upon request.

Made in Germany

Móc cẩu xoay 360° RUD

High-strength suspension eye Double ball-bearing support for smooth tilting, turning and rotating. Not suited to continuous rotation under full load

Made in Germany

Móc cẩu xoay 360° RUD

High-strength suspension eye Double ball-bearing support for smooth tilting, turning and rotating. Can even be rotated under full load at 90° to direction of bolting. Not suited to continuous rotation under full load Other thread lengths also available upon request.

Made in Germany

Móc cẩu xoay 360° RUD

High-strength suspension eye Double ball-bearing support for smooth tilting, turning and rotating. Not suited to continuous rotation under full load

Made in Germany