Móc cẩu xoay 360° MAKE

Metric thread: from M 24 to M 100 as standard; for loads ranging from 4.50 t to 32.10 t

UNC thread: from UNC 1″ to UNC 2″1/2 as standard; for loads ranging from 10,000 lbs to 55,000 lbs

The universal swivel shackle 762191 is a double swivel ring. It is specially designed for simultaneously lifting and rotating loads. Its double swivel action ensures perfect alignment with the sling.

It consists of a GRADUP steel ring that can swivel under the load. The ring swivels 180°, but has a rotating range of 360°.

762191 lifting rings have a safety factor of 4 and 5, which means that their breaking load is four or five times greater than the capacity indicated in the technical sheet.

Each swivel lifting ring is delivered with a user manual and a certificate of compliance. They are ISO 14001 and ISO 9001 certified in keeping with essential safety requirements.

Made in Luxembourg

Móc cẩu xoay 360° MAKE

Metric thread: from M 24 to M 100 as standard; for loads ranging from 4.50 t to 32.10 t

UNC thread: from UNC 1″ to UNC 2″1/2 as standard; for loads ranging from 10,000 lbs to 55,000 lbs

The universal swivel shackle 762196 is a double swivel ring. It is specially designed for simultaneously lifting and rotating loads. Its double swivel action ensures perfect alignment with the sling.

It consists of a GRADUP steel ring that can swivel under the load. The ring swivels 180°, but has a rotating range of 360°.

762196 lifting rings have a safety factor of 4 and 5, which means that their breaking load is four or five times greater than the capacity indicated in the technical sheet.

Each swivel lifting ring is delivered with a user manual and a certificate of compliance. They are ISO 14001 and ISO 9001 certified in keeping with essential safety requirements.

Made in Luxembourg

Móc cẩu xoay 360° RUD

High-strength suspension eye For loads which are turned and rotated. Can be rotated through 360° under load. Other thread lengths also available upon request.

Made in Germany

Ma ní RUD

Thanks to a unique spring mechanism, the RUD ACP-TURNADO always turns immediately in the optimum direction of force. This prevents the load from dropping down jerkily. The worst-case position with its high transverse loads is prevented. Maximum force transmission in all possible directions. - No fading - Unique RUD spring mechanism - Higher load capacities than comparable Sizes. - Bracket rotatable by 360° - Bracket can be swivelled by 180° Other sizes available upon request.

Made in Germany

Móc cẩu xoay 360° RUD

High-strength suspension eye For loads which are turned and rotated. Can be rotated through 360° under load. Other sizes available upon request.

Made in Germany

Điểm nâng để hàn RUD

Loadable from all directions Tempered base body, therefore wear-resistant Patented markings for easy determination for withdraw of service

Made in Germany

Móc cẩu xoay 360° RUD VLBG-PLUS

Can be rotated by 360° and adjusted in direction of pull, bracket can be pivoted 180°, full working load limit in any direction of load, surface powder-coated in ICE-PINK®.

Specially designed ICE-Bolt (M8-M24) and with it an on average 45% higher working load limit than with the VLBG predecessor model (in the M8-M30 sizes). Use only the ICE-Bolts/screws supplied with the item. Other thread lengths also available upon request.

Made in Germany

Móc cẩu hàn RUD

Suspension ring pivots 180° 100% WLL at 90° in the load ring plane possible Suspension ring & weld-on-block of the VLBS-U are undetachable (16t without spring)

Made in Germany

Móc cẩu xoay 360° RUD

High-strength suspension eye Double ball-bearing support for smooth tilting, turning and rotating. Can even be rotated under full load at 90° to direction of bolting. Not suited to continuous rotation under full load Other thread lengths also available upon request.

Made in Germany

Móc cẩu xoay 360° RUD

High-strength suspension eye Double ball-bearing support for smooth tilting, turning and rotating. Not suited to continuous rotation under full load

Made in Germany

Móc cẩu xoay 360° RUD

High-strength suspension eye Double ball-bearing support for smooth tilting, turning and rotating. Can even be rotated under full load at 90° to direction of bolting. Not suited to continuous rotation under full load Other thread lengths also available upon request.

Made in Germany

Móc cẩu xoay 360° RUD

High-strength suspension eye Double ball-bearing support for smooth tilting, turning and rotating. Not suited to continuous rotation under full load

Made in Germany