Lưỡi cưa cầm tay PUK

With sharp toothing, wavy-set, specially hardened and tempered, with pins; for all kinds of precise sawing work in metal, aluminium, non-ferrous metals, all types of wood, plastic ducts/tubes, plaster etc.

Pack of 12

Dùng cho các loại cưa:

224110 Handsaw PUK,

224120 Minisaw BAHCO,

224140 Junior saw BAHCO

Made in Germany

Lưỡi cưa cầm tay BAHCO

Hardened and tempered plain-carbon steel, teeth milled and set, for metal.

Hộp 5 pcs, dùng cho các loại cưa:

224110 Handsaw PUK,

224120 Minisaw BAHCO,

224140 Junior saw BAHCO

Made in Germany

Lưỡi cưa cầm tay BAHCO

Hardened plain-carbon steel, teeth milled and set.

Hộp 5 pcs, dùng cho cưa:

224170 Coping saw BAHCO

Made in Sweden

Lưỡi cưa MAKE

Carbide coated, diameter approx. 2.8 mm, fits all conventional 300 mm saw frames. Effortlessly separates, cuts and saws glass, wood, metal and plastic. Also suitable for circular cuts.

Made in Eu

Lưỡi cưa BAHCO

BAHCO 3906, practically unbreakable and shatterproof SANDFLEX® bi-metal blade for general purpose use. With a blade back of strong, flexible spring steel and a tooth line in high-alloyed super high speed steel, for teeth that stay sharp longer and a longer-lasting blade. This combination of flexibility and toughness permits work even in high-alloy metals.

Stock package 100 pcs

Made in Sweden

Lưỡi cưa WESA

Bi-metal saw blade, top quality, practically unbreakable; HSS teeth, hardened, precision-set and fluted, back made of flexible spring steel.
Stock package 100 pcs.

Made in Germany

Lưỡi cưa WESA

SS-flexible, highly elastic, for a wide range of applications, long service life.
Stock package 100 pcs.

Made in Germany

Lưỡi cưa MAKE

HSS, flexible, for general purpose use.
Stock package 50 pcs

Made in Germany

Lưỡi cưa BAHCO

Usable with: 224430 Japanese pull saw BAHCO

Made in Japan

Lưỡi cưa BAHCO

SANDFLEX® replacement blades for jigsaw 321.

Made in Belarus

Lưỡi cưa BAHCO

Specifically for sawing dry wood and across the grain on new wood. Triangular-grouped toothing. Hardened and tempered quality steel.

Usable with:
224461 Bow saw BAHCO

Made in Portugal

Lưỡi cưa máy BAHCO

Bahco 3809, Bimetal blade, for all materials. Teeth made of super-speed steel, crossed and hardened. Back made of spring steel. No danger of breakage. High cutting performance combined with maximum workplace safety.

Made in Belarus

Lưỡi cưa máy WESA

Bi-metal blade, HSS-E, for all types of power saws, unbreakable due to cold-hammered blade body, with welded-on cutting edge, teeth age-hardened

Made in Germany

Lưỡi cưa máy WESA

Bimetal blade, for KASTO machines with offset holes (KA).

Made in Germany

Lưỡi cưa máy WESA

High performance saw blade made of HSS-E-Co for sawing hard-to-cut tool steels. Usable in all machines.

Made in Germany

Lưỡi cưa máy WESA

High performance bi-metal bandsaw blade of HSS-M42, welded machine-ready.
Cutting edges made of HSS-cobalt-molybdenum with 67-69 HRc. High tooth hardness and good tempering properties ensure longer useful life with higher cutting speeds and greater feed.

Application
A powerful, multi-purpose blade, especially suited for mass production and high cut rates. For steels up to 1200 N/mm2.

Toothing
2 teeth per inch
For solid material of Ø 200-500 mm. The positive rake allows even work-hardening materials can be cut well.
2 / 3 teeth per inch
For solid material of Ø 150-400 mm. Also for bundle and layer cuts with a cutting width of 150-360 mm.
3 teeth per inch
For solid material of Ø 100-250 mm. Suited for various steel types and non-ferrous metals.
3 / 4 teeth per inch
For solid material and bundle cuts of Ø 80-200 mm. All-purpose bandsaw blade for production.
4 teeth per inch
For solid material of Ø 60-150 mm; cutting properties as for 3 teeth per inch.
4 / 6 teeth per inch
For solid material of Ø 50-100 mm, insensitive to tooth breakage. Different tooth pitches alternating at regular intervals allow larger cross-sectional areas to be sawed without changing the blade
5 / 8 teeth per inch
For solid material of Ø 30-80 mm, thick-walled pipes and profiles, wall thickness 8-12 mm.
6 / 10 teeth per inch
For solid material of Ø 20-50 mm, pipes and profiles, wall thickness 5-8 mm.
8 / 12 teeth per inch
For solid material of Ø 10-30 mm, thin-walled pipes and profiles, wall thickness 2-5 mm.

Other dimensions, welded machine-ready, can be supplied at short notice.

Made in Germany