Nhíp gắp linh kiện RUBIS-348880

For flat components. Surgical stainless steel, acid-resistant, non-rusting, anti-magnetic. Resistant to nitric and hydrofluoric acids.

Made in Switzerland

Nhíp kẹp hàn thiếc RUBIS-348900

Carbon steel, angled head, cutting edges without bevel, for very thin wires.

Made in Switzerland

Nhíp kẹp hàn thiếc RUBIS-348910

Tips reinforced with 30% carbon fibres, ESD-safe, heat-resistant to 250°C (to 300°C for short periods), long-life because friction is minimal, soft and non-scratching; surgical stainless steel, acid-resistant, non-rusting, anti-magnetic. Resistant to nitric and hydrofluoric acids.

Made in Switzerland

Nhíp kẹp chính xác cao RUBIS-348920

Very precise and fine tips, all edges of the tips are rounded to prevent damage to the components on printed circuit boards; surgical stainless steel, acid-resistant, non-rusting, anti-magnetic. Resistant to nitric and hydrofluoric acids.

Made in Switzerland

Nhíp kẹp SMD FUTURO

Type SM.SA, easy handling of the smallest SMD components, low-carbon austenitic steel, anti-magnetic, good corrosion resistance to most chemicals, salts and acids, Made in Switzerland.

Designs:
348936.0100 SM103.SA For gripping and positioning small 2- and 3-channel transistor casings, tips angled at 45°
348936.0200 SM107.SA For positioning all flat components, tips angled at 60°
348936.0300 SM108.SA For positioning and soldering 1 mm wide components
348936.0400 SM111.SA For positioning 5 mm monolithic chip capacitors, flat grooved tips (2 mm long)
348936.0500 SM115.SA For holding and positioning cylindrical components (up to 0.5 mm in diameter), grooved tips angled at 30°


Suitable for:
348946 SMD tweezer set FUTURO

Made in Switzerland

Bộ nhíp kẹp sửa điện tử FUTURO

5-piece, low-carbon austenitic steel, anti-magnetic, good corrosion resistance to most chemicals, salts and acids, supplied in a case with foam insert, Made in Switzerland.

Contents:
348946.0100
1 SMD tweezers SM103.SA, 115 mm, for placing components, tips angled at 45°
1 SMD tweezers SM107.SA, 120 mm, for positioning all flat components, tips angled at 60°
1 SMD tweezers SM108.SA, 120 mm, for positioning and soldering 1 mm wide components
1 SMD tweezers SM111.SA, 120 mm, for positioning 5 mm monolithic chip capacitors, flat grooved tips (2 mm long)
1 SMD tweezers SM115.SA, 120 mm, for holding and positioning cylindrical components (up to 0.5 mm in diameter), grooved tips angled at 30°

Appropriate spare parts:
348936 SMD tweezers FUTURO

Made in Switzerland

Nhíp kẹp SMD RUBIS-348950

For inserting flat components at an angle of 60°; surgical stainless steel, acid-resistant, non-rusting, anti-magnetic. Resistant to nitric and hydrofluoric acids. Suitable for: 349002 SMD tweezers set RUBIS

Made in Switzerland

Nhíp kẹp SMD RUBIS-348960

Tips feature inner grooves and are angled at 45° for inserting and soldering parts 1 mm in width. Austenitic surgical steel, acid-resistant, stainless, antimagnetic. Resistant to nitric and hydrofluoric acids. Suitable for handling miniature elements in often very limited working space. Suitable for: 349002 SMD tweezers set RUBIS

Made in Switzerland

Nhíp kẹp SMD RUBIS-348980

With tips corrugated on the inside, for inserting cubic chip capacitors. Surgical stainless steel, acid-resistant, non-rusting, anti-magnetic. Resistant to nitric and hydrofluoric acids. Suitable for: 349002 SMD tweezers set RUBIS

Made in Switzerland

Nhíp kẹp SMD RUBIS-348990

With tips corrugated on the inside, for inserting 5 mm chip capacitors with flat base. Surgical stainless steel, acid-resistant, non-rusting, anti-magnetic. Resistant to nitric and hydrofluoric acids. Suitable for: 349002 SMD tweezers set RUBIS

Made in Switzerland

Nhíp kẹp SMD RUBIS-349000

With tips corrugated on the inside, angled 30°, for holding and inserting cylindrical components to sizes of 1 mm. Surgical stainless steel, acid-resistant, non-rusting, anti-magnetic. Resistant to nitric and hydrofluoric acids. Suitable for: 349002 SMD tweezers set RUBIS

Made in Switzerland

Bộ nhíp kẹp sửa điện tử RUBIS

Set of 5 SMD tweezers. Surgical stainless steel, acid-resistant, non-rusting, anti-magnetic. Resistant to nitric and hydrofluoric acids. Matt, non-glare surface; for handling and inserting SMD components.

Appropriate spare parts:
348950 SMD tweezers RUBIS
348960 SMD tweezers RUBIS
348980 SMD tweezers RUBIS
348990 SMD tweezers RUBIS
349000 SMD tweezers RUBIS

Made in Switzerland

Nhíp kẹp ESD RUBIS

ESD-safe, conductive plastic tweezers. With 25% fibreglass-reinforced Vestamid. DIN 53482. Heat-resistant to 175°C, high tensile strength and excellent resistance to acids. Non-magnetic, free of silicon and amine, high-precision.

Made in Switzerland