Kìm cắt cáp cách điện 1000V KNIPEX

Knipex 9536, special tool steel, oil-hardened, hardened edges with special grinding, lacquered black, with 1000 V insulated multicomponent handle sheaths, VDE-tested. For cutting copper and aluminium cables, single-strand and multi-strand. One-hand operation thanks to ratchet principle, can be unlocked in any cutting position, little force required due to very high transmission ratio, with jam protection. Not suitable for steel wire, steel-armoured cable, and wire ropes!

Designed:

342355.0100 suitable for copper and alu cables Ø 32 mm, 240 mm²

342355.0200 suitable for copper and alu cables Ø 52 mm, 380 mm²

tag: 9536250, 9536280

Made in Germany

Kìm cắt cáp cách điện KNIPEX-342360

Knipex 9527, screwed-on cutter head in chrome-vanadium electric steel, forged, oil-hardened, interchangeable. Handle steel tube, favourable transmission ratio due to double lever, handles dip-insulated 1000 V, VDE-tested. For cutting copper and aluminium cables, single-strand and multi-strand. Not suitable for steel wire, steel-armoured cable, ...

Made in Germany

Kìm cắt cáp cách điện 1000V WIHA 34743

Cable Cutter, VDE

For Use With:copper And Aluminium Cables;

Rohs Compliant: Yes

Made in Germany

Kìm cắt cách điện KNIPEX-349297

Knipex 1426, vanadium electric steel, forged, oil-hardened, chrome-plated, with multicomponent sheaths, insulated to 1000 V, VDE tested, complies with DIN EN 60900. Inductively hardened precision cutters, cutter hardness approx. 60 HRC, for soft and medium-hard wire; precision insulation stripping holes for single core, solid conductors. Knipex 1426, vanadium electric steel, forged, oil-hardened, chrome-plated, with multicomponent sheaths, insulated to 1000 V, VDE tested, complies with DIN EN 60900. Inductively hardened precision cutters, cutter hardness approx. 60 HRC, for soft and medium-hard wire; precision insulation stripping holes for single core, solid conductors

Made in Germany

Kìm tuốt dây cách điện KNIPEX 11 06 160

Knipex 1106, vanadium electric steel, forged, oil-hardened, chrome-plated. For conductors with single, multiple or fine cores, with plastic or rubber insulation, easy adjustment with knurled screw and locknut, with opening spring. Handles with thick-walled multicomponent sheaths, insulated to 1000 V, VDE tested, compliant with standard DIN EN 60900.

Made in Germany

Kìm tuốt dây cách điện KNIPEX 13 66 180

Knipex 1366 StriX, special tool steel, forged, oil-hardened, chrome-plated. For single, multiple and fine stranded conductors with plastic or rubber insulation, easy adjustment by knurled screw and lock nut. Shear cutting edge for cutting copper and aluminium cables up to Ø 15 mm (5 x 2.5 mm²), handles with thick-walled multi-component sleeves, 1000 V insulation, VDE tested, complies with standard DIN EN 60900.

Made in Germany

Kìm tuốt dây cách điện KNIPEX-349322

VDE-tested. For the time-saving dismantling and stripping of all common round and damp-proof installation cables. Good access even with deep flush-mounted sockets thanks to slim head shape and angled cable jacket cutting edge. Easy dismantling without damaging thanks to round cutter with depth control. Universally applicable: Precision stripping holes for 1.5 and 2.5 mm² cables. With side cutter for cutting cables, wires, small screws and nails. All cutting edges induction hardened to approx. 61 HRC: for high resistance to wear. 30% less weight than comparable pliers. Vanadium electric steel, forged, oil-hardened Pliers chrome-plated, handles insulated with multi-component sheaths

Made in Germany

Kìm mỏ quạ cách điện 1000V WIHA

Standards

DIN ISO 8976. Manufactured acc. to IEC 60900.

Application

For gripping and holding pipes and angular profiles such as hex nuts in the installation area. For work in the area of live parts up to 1,000 V AC.

tag: 37450

Made in Germany

Kìm cắt Bi-Cut cách điện 1000V WIHA

Description

Precise, safe work – at double the power: no problem for the Wiha BiCut® Professional electric diagonal cutters. If standard performance from heavy-duty diagonal cutters is no longer enough, force can be doubled at the simple press of a button. In normal mode, the BiCut® effortlessly cuts items such as cables or iron nails. A patented joint design transforms the heavy-duty diagonal cutters into high-performance diagonal cutters for extremely hard and stronger materials. This function is not only suitable for cutting exceptionally tough materials but also for users who need to carry out normal cutting tasks over a longer period of time. Thanks to double cutting force, the user only needs to apply half the hand force, ensuring work is easy on muscles and tendons. This significantly reduces the risk of cramp or slipping if too much force is applied. The backs of the handles also feature an extra wide design while the integrated soft and hard zones on the handles are ideally tailored to the human hand. The high-performance diagonal cutters are manufactured as per the international IEC 60900 standard and are thus approved for working on live parts up to 1,000 V AC.

Standards

Manufactured acc. to IEC 60900.

Application

Suitable for cutting different materials, ranging from soft to extremely hard, such as cables, nails, screws, bolts, wire rope, spring wire and chains. Suitable for working on live parts up to 1,000 V AC.