Kìm mỏ nhọn cách điện FUTURO-340362

Made of high-quality tempered tool steel, chrome-plated, tip curved at approx. 40°, extra-long cutting edge for flat and round cables, partially serrated gripping surface, 1000-volt insulation, VDE-tested, corresponds to standard DIN EN 60900, with ergonomic two-component grip sleeves.

Kìm mỏ nhọn cách điện KNIPEX-340700

Knipex 3016, DIN ISO 5745, chrome-vanadium electric steel, forged, oil-hardened, chrome-plated, long-flat jaws, gripping surfaces grooved; handles with thick-walled multicomponent sheaths. Insulated to 1000 V, VDE tested, compliant with standard DIN EN 60900

Made in Germany

Kìm mỏ quạ cách điện KNIPEX-341405

Knipex 8726, chrome vanadium electric steel, forged, multi-stage oil-hardened, chrome-plated, insulated handles with multi-component grips, pinch protection prevents crushing injuries. Gripping surfaces with specially hardened teeth, hardness approx. 61 HRC. Box joint, fast adjustment via push-button directly on the workpiece, self-locking on pipes and nuts.

Made in Germany

Kìm mỏ quạ cách điện NERIOX

Tool steel, 1000-volt insulation, VDE-tested, corresponds to standard DIN EN 60900, with ergonomic two-component grip sleeves.

Mỏ lết kìm cách điện KNIPEX

Knipex 8606, chromium-vanadium electric steel, forged, oil-hardened, chrome-plated. Grips with multi-component sleeves, smooth, parallel jaws, stepless width adjustment, adjustment by push-button directly on the workpiece, 10-fold hand force amplification by cam drive. Adjustable screw tool, the stroke between the jaws allows fast tightening and loosening of screw connections through a ratchet action; replaces a complete set of open-end wrenches, metric and imperial sizes. 1000-volt insulation, VDE-tested, corresponds to standard DIN EN 60900

tag: 8606250

Made in Germany

Kìm cắt cách điện KNIPEX-341753

Knipex 7306, DIN ISO 5749, chromium-vanadium high-performance steel, forged, oil-hardened, chrome-plated, handles with multicomponent sheaths, insulated to 1000 V, VDE-tested, compliant with DIN EN 60900 standard. For all types of wire including piano wire: boxed hinge, high transmission ratio, 20% less force required, high cutting power with low force exertion; large opening width for thicker cables; also for thin wires; compact weight-saving construction

Made in Germany

Kìm cắt cách điện KNIPEX

Knipex 7406, DIN ISO 5749, chrome-vanadium electric steel, forged, oil-hardened, chrome-plated,cutting edge hardness approx. 64 HRC, for all types of wire, including piano wire; with thick-walled multicomponent handle sheaths. Insulated to 1000 V, VDE tested, compliant with standard DIN EN 609

Made in Germany

Kìm c?t cách ?i?n KNIPEX 7006

Knipex 7006, vanadium electric steel, forged, oil-hardened, chrome-plated, Precision cutting edges (cutting edge hardness approx. 62 HRC) for soft and hard wire, clean cutting of thin Cu wires, even at the tips of the cutting edges; slim head form, with multicomponent handle sheath. Insulated to 1000 V, VDE tested, compliant with standard DIN EN 60900

Tags: 7006125, 7006140, 7006160, 7006180

Made in Germany

Kìm cắt cách điện KNIPEX-341760

Knipex 7007, vanadium electric steel, forged, oil-hardened, chrome-plated. Precision cutting edges (cutting edge hardness approx. 62 HRC) for soft and hard wire, clean cutting of thin Cu wires, even at the tips of the cutting edges; slim head form. Dip-insulated, insulated to 1000 V, VDE tested, compliant with standard DIN EN 60900

Made in Germany

Kìm cắt cách điện NERIOX-341771

Tool steel, polished head, low-wear lap joint, riveted and able to withstand high loads. 1000-volt insulation, VDE-tested, corresponds to standard DIN EN 60900, with ergonomic two-component grip sleeves

Kìm cắt cách điện NERIOX-341772

Tool steel, polished head, low-wear lap joint, riveted and able to withstand high loads. 1000-volt insulation, VDE-tested, corresponds to standard DIN EN 60900, with ergonomic two-component grip sleeves

Kìm cắt cách điện FUTURO-341773

Made of high-quality tempered tool steel, chrome-plated, low wear lap joint, riveted and able to withstand high loads. Precision cutting edge with face ground cutting surface and cutting edge without chamfer, 1000-volt insulation, VDE-tested, corresponds to standard DIN EN 60900, with opening spring and ergonomic two-component grip sleeves.

Kìm cắt cách điện FUTURO-341774

Made of high-quality tempered tool steel, chrome-plated, low wear lap joint, riveted and able to withstand high loads. Precision cutting edge with face ground cutting surface and cutting edge without chamfer, 1000-volt insulation, VDE-tested, corresponds to standard DIN EN 60900, with opening spring and ergonomic two-component grip sleeves

Kìm cắt cáp cách điện KNIPEX

Made of stainless special steel, hardened and tempered. Hardened cutting with precision grinding, resulting in no squeezing and low deformation of the cable. With pinch protection and adjustable screw joint. Easy cut with one-handed operation thanks to to high transmission of force. For cutting copper and aluminium cables.

Designs:
342331.0100: For cutting cables Ø 10 mm / 24 mm², with opening spring and pawl
342331.0200: For Cu conductor single-strand wires up to 16 mm², multi-strand up to 50 mm² and fine-strand up to 70 mm², for Al conductor multi-strand up to 70 mm², VDE-tested

Not suitable for steel cable and copper conductors with hard coatings.

tag: 9505165, 9506230

Made in Italy

Kìm cắt cáp cách điện 1000V KNIPEX-342332

Knipex 9516, special tool steel, oil-hardened, chrome plated, hardened cutting edges with precision grinding, adjustable screw joint, self locking, insulated to 1000 V, VDE-tested. For cutting copper and aluminium cables. Not suitable for steel wire, steel-armoured cable, aluminium alloys

Made in Germany

Kìm cắt cáp cách điện 1000V KNIPEX

Knipex 9516 StepCut, special tool steel, forged, oil-hardened, chrome-plated, innovative step cutting with precision ground for noticeably less effort when cutting, screw joint, insulated 1000 V with multi-component grip sleeves, VDE tested. For cutting copper and aluminium cables. Not suitable for steel wire, steel-reinforced cables, aluminium alloys and hard-drawn copper conductors.

tag: 9516160

Made in Germany

Kìm cắt cáp cách điện 1000V KNIPEX

Knipex 9536, special tool steel, oil-hardened, hardened edges with special grinding, lacquered black, with 1000 V insulated multicomponent handle sheaths, VDE-tested. For cutting copper and aluminium cables, single-strand and multi-strand. One-hand operation thanks to ratchet principle, can be unlocked in any cutting position, little force required due to very high transmission ratio, with jam protection. Not suitable for steel wire, steel-armoured cable, and wire ropes!

Designed:

342355.0100 suitable for copper and alu cables Ø 32 mm, 240 mm²

342355.0200 suitable for copper and alu cables Ø 52 mm, 380 mm²

tag: 9536250, 9536280

Made in Germany

Kìm cắt cáp cách điện KNIPEX-342360

Knipex 9527, screwed-on cutter head in chrome-vanadium electric steel, forged, oil-hardened, interchangeable. Handle steel tube, favourable transmission ratio due to double lever, handles dip-insulated 1000 V, VDE-tested. For cutting copper and aluminium cables, single-strand and multi-strand. Not suitable for steel wire, steel-armoured cable, ...

Made in Germany

Kìm cắt cáp cách điện 1000V WIHA 34743

Cable Cutter, VDE

For Use With:copper And Aluminium Cables;

Rohs Compliant: Yes

Made in Germany

Kìm cắt cách điện KNIPEX-349297

Knipex 1426, vanadium electric steel, forged, oil-hardened, chrome-plated, with multicomponent sheaths, insulated to 1000 V, VDE tested, complies with DIN EN 60900. Inductively hardened precision cutters, cutter hardness approx. 60 HRC, for soft and medium-hard wire; precision insulation stripping holes for single core, solid conductors. Knipex 1426, vanadium electric steel, forged, oil-hardened, chrome-plated, with multicomponent sheaths, insulated to 1000 V, VDE tested, complies with DIN EN 60900. Inductively hardened precision cutters, cutter hardness approx. 60 HRC, for soft and medium-hard wire; precision insulation stripping holes for single core, solid conductors

Made in Germany