Kéo cắt tôn trái ERDI

of stainless steel, special hardened, HRc 58, for straight, continuous and pattern cuts, cuts sheet steel up to 1.2 mm, stainless sheet steel up to 0.8 mm, left-hand cutting

Made in Germany

Kéo cắt tôn trái WISS

Wiss M-1R, american design, outstanding quality, with lever transmission, toothed blades, ergonomic vinyl handles, opening spring, locking lever, left-hand cutting (for tight left-hand to straight cuts), for sheet steel up to 1.2 mm.

Made in Usa

Kéo cắt tôn trái WISS

Wiss M-1R-Si, american design, outstanding quality, with lever transmission, toothed blades, ergonomic vinyl handles, opening spring, locking lever; for particularly tough materials such as stainless steels and titanium, cutting capacity 1.2 mm, left-hand cutting (for tight left-hand to straight cuts).

Made in Usa

Kéo cắt tôn thẳng WISS

Wiss M-3R, american design, outstanding quality, with lever transmission, toothed blades, ergonomic vinyl handles, opening spring, locking lever; for straight cuts (or slight right-hand and left-hand cuts), for sheet steel up to 1.2 mm.

Made in Usa

Kéo cắt tôn trái ERDI

With lever transmission, fine-toothed blades, ergonomic PVC handles, opening spring and locking lever, blades double-hardened, for straight continuous and figure cuts, cuts sheet metal (600 N/mm²) up to 1.2 mm; left-cutting.

Made in Germany

Kéo cắt tôn trái ERDI

Optimised lever transmission with 25% less force required, without serration, reduced deformation of the sheet metal, very mobile despite long blade, ergonomic handle. For straight continuous figure cuts; cuts sheet metal (600 N/mm²) up to 1.2 mm, left-cutting.

Made in Germany

Kéo cắt tôn trái ERDI

With double lever transmission for high cutting performance with low force requirement, self-opening, stainless steel cutter head, drop forged and tempered. Blade 75 mm with additional inductive hardening for extra-long cuts, ergonomic PVC handle; cuts sheet metal (600 N/mm²) up to 1.2 mm, left-cutting.

Made in Germany

Kéo cắt tôn KNIPEX

For cutting iron, copper or aluminium sheets of up to 1.2 mm thickness, plastic of up to 2.0 mm thickness
For cutting materials without deformation, leaving clean cut edges, no post-work required, with chip breaker
Tool body: Special tool steel, rolled, oil-hardened
Blade: Special tool steel, oil-hardened, replaceable

Made in France

Dao cắt tôn FORMAT

Hand shear machines are suitable for cutting steel in sheet, plate, flat, rod.

There is a round blade with the machine for bar cutting.

Shears:

Frame is made of steel SS41.
Long handle is attached with each machine.
The blades are made of SKS tool from Japan : JIS G4404.
Cutting by our machines is precise.
The specifications are the best cutting range of our suggestion.

Made in Germany