Kéo cắt tôn trái ERDI

of stainless steel, special hardened, HRc 58, for straight, continuous and pattern cuts, cuts sheet steel up to 1.2 mm, stainless sheet steel up to 0.8 mm, left-hand cutting

Made in Germany

Kéo cắt tôn phải ERDI

Pelican snips of stainless steel, special hardened, HRc 58; for long, straight and continuous cuts, cuts sheet steel up to 1.2 mm, stainless sheet steel up to 0.8 mm; right-hand cutting.

Made in Germany

Kéo cắt tôn phải ERDI

With lever transmission, fine-toothed blades, ergonomic PVC handles, opening spring and locking lever, blades double-hardened, for straight continuous and figure cuts, cuts sheet metal (600 N/mm²) up to 1.2 mm; right-cutting.

Made in Germany

Kéo cắt tôn trái ERDI

With lever transmission, fine-toothed blades, ergonomic PVC handles, opening spring and locking lever, blades double-hardened, for straight continuous and figure cuts, cuts sheet metal (600 N/mm²) up to 1.2 mm; left-cutting.

Made in Germany

Kéo cắt tôn phải ERDI

Optimised lever transmission with 25% less force required, without serration, reduced deformation of the sheet metal, very mobile despite long blade, ergonomic handle. For straight continuous figure cuts; cuts sheet metal (600 N/mm²) up to 1.2 mm, right-cutting.

Made in Germany

Kéo cắt tôn trái ERDI

Optimised lever transmission with 25% less force required, without serration, reduced deformation of the sheet metal, very mobile despite long blade, ergonomic handle. For straight continuous figure cuts; cuts sheet metal (600 N/mm²) up to 1.2 mm, left-cutting.

Made in Germany

Kéo cắt tôn trái ERDI

With double lever transmission for high cutting performance with low force requirement, self-opening, stainless steel cutter head, drop forged and tempered. Blade 75 mm with additional inductive hardening for extra-long cuts, ergonomic PVC handle; cuts sheet metal (600 N/mm²) up to 1.2 mm, left-cutting.

Made in Germany

Kéo cắt tôn phải ERDI

Equipped with HSS blades, particularly wear resistant, up to 15 times longer service life, hardness HRc 64 to 67, for hard sheets, stainless and acid-resistant sheets etc.; cuts sheets (600 N/mm²) up to 1.2 mm; with lever transmission, PVC handles, opening spring and locking lever. Right-cutting.

Also available for left-hand cutting.

Made in Germany

Kéo cắt đai thép ERDI

Clamp made from polymer material holds the end of the strap firmly in place when cutting; compound leverage; ergonomic, PVC-coated handle; self-opening due to built-in spring.

Made in Germany