Kéo cắt tôn trái ERDI

With lever transmission, fine-toothed blades, ergonomic PVC handles, opening spring and locking lever, blades double-hardened, for straight continuous and figure cuts, cuts sheet metal (600 N/mm²) up to 1.2 mm; left-cutting.

Made in Germany

Kéo cắt tôn phải ERDI

Optimised lever transmission with 25% less force required, without serration, reduced deformation of the sheet metal, very mobile despite long blade, ergonomic handle. For straight continuous figure cuts; cuts sheet metal (600 N/mm²) up to 1.2 mm, right-cutting.

Made in Germany

Kéo cắt tôn trái ERDI

Optimised lever transmission with 25% less force required, without serration, reduced deformation of the sheet metal, very mobile despite long blade, ergonomic handle. For straight continuous figure cuts; cuts sheet metal (600 N/mm²) up to 1.2 mm, left-cutting.

Made in Germany

Kéo cắt tôn trái ERDI

With double lever transmission for high cutting performance with low force requirement, self-opening, stainless steel cutter head, drop forged and tempered. Blade 75 mm with additional inductive hardening for extra-long cuts, ergonomic PVC handle; cuts sheet metal (600 N/mm²) up to 1.2 mm, left-cutting.

Made in Germany

Kéo cắt tôn phải ERDI

Equipped with HSS blades, particularly wear resistant, up to 15 times longer service life, hardness HRc 64 to 67, for hard sheets, stainless and acid-resistant sheets etc.; cuts sheets (600 N/mm²) up to 1.2 mm; with lever transmission, PVC handles, opening spring and locking lever. Right-cutting.

Also available for left-hand cutting.

Made in Germany

Kéo cắt đai thép FELCO

Felco CP, insulated handle, cuts twine, packing wire, steel bands, etc.

Made in Germany

Kéo cắt đai thép ERDI

Clamp made from polymer material holds the end of the strap firmly in place when cutting; compound leverage; ergonomic, PVC-coated handle; self-opening due to built-in spring.

Made in Germany

Kéo cắt tôn KNIPEX

For cutting iron, copper or aluminium sheets of up to 1.2 mm thickness, plastic of up to 2.0 mm thickness
For cutting materials without deformation, leaving clean cut edges, no post-work required, with chip breaker
Tool body: Special tool steel, rolled, oil-hardened
Blade: Special tool steel, oil-hardened, replaceable

Made in France

Dao cắt tôn FORMAT

Hand shear machines are suitable for cutting steel in sheet, plate, flat, rod.

There is a round blade with the machine for bar cutting.

Shears:

Frame is made of steel SS41.
Long handle is attached with each machine.
The blades are made of SKS tool from Japan : JIS G4404.
Cutting by our machines is precise.
The specifications are the best cutting range of our suggestion.

Made in Germany