Khối chà nhám tay STIKIT

Ideal for all manual sanding work; the Stikit sanding paper adheres under slight pressure to the surface covered with a tough felt; the ideal shape of the block permits sanding work at very difficult-to-access positions; not including sanding paper roll.

Usable with: 382388 Self-adhesive sanding paper roll STIKIT 3M 426U

Made in France

Giấy nhám 3M, with hook-and-loop fastening, 3M 245 HookitTM

Strips with hook-and-loop fastening, no hole. The open abrasive coating makes it especially suitable for intermediate sanding on wood and metals.

Appropriate accessories: 382399 Hand block for Hookit strips

Made in United kingdom

Giấy nhám 3M, with hook-and-loop fastening, 3M 618 HookitTM

Strips with hook-and-loop fastening, no hole. For sanding between coats and fine sanding after painting. The silicon carbide grit makes them sharp and durable even in very fine grit.

Appropriate accessories: 382399 Hand block for Hookit strips

Made in United kingdom

Tay cầm cho giấy nhám

Usable with: 382395 Abrasive sheets with 3M hook-and-loop fastening 3M 245 HookitTM

382397 Abrasive sheets with 3M hook-and-loop fastening 3M 618 HookitTM

Made in Usa

Khối chà nhám bọt SIA Abrafoam-382405

Abrafoam Standard Block, foam, aluminium oxide, coated on 4 sides, for wet and dry sanding, all-purpose on metal, plastic, wood, primer, filler, paint etc.

Made in Switzerland

Khối chà nhám bọt SIA Abrafoam-382406

Standard pad, blue, made of foam, aluminium coated on 2 sides, for wet and dry sanding, low clogging, all-purpose on wood, plastic, primer, filler, paint, etc. Stock package 50 pcs

Made in United kingdom

Khối chà nhám 3M -382410

Coated on 4 sides, with 2 grits, for wet or dry sanding, for sanding work on wood, metal, plastic. The hard emery surfaces are securely bonded to a flexible foam core, making them suitable for sanding down edges, rebates and flat surfaces. Cleaning: rinse under a water tap, allow to dry and re-use.

Made in United kingdom

Giấy nhám đục lỗ SIA, 1950 siaspeed -382415

With centre hole and 14 extraction holes, all-round product with high removal rate, perfect surface quality and long service life. Grain 40–80 with ceramic content, grain 100–600 with semi-precious corundum, paper base with siafast hook-and-loop system, ideally suited for grinding of coatings and impurities, corrective grinding of irregularities along the edge of repairs, surface and fine grinding of putty and filler and grinding of old and new lacquer surfaces. Machinable materials: Paint, fillers, putties, lacquer, old lacquer, primers, plastics, acrylic glass, polyester gel coat, GFRP

Made in Switzerland

Khối chà nhám SCHLEIFFIX -382420

Silicon carbide, synthetic bonding. Semi-friable cleaning agent permeated with abrasive grain; polishes, matts, cleans, smoothes all metals, plastics, ceramics, wood, paints, etc.; effectiveness is increased by adding water, soap or kerosine. Versatile product for all kinds of tasks.

Made in Germany

Khối chà nhám AX-O -382430

Ideal for cleaning and refinishing in workshop and factory, for brushing, smoothing, fine sanding, stripping, rust removal, removal of paint residue, etc.; chemically neutral and silicone free; can be used dry or wet; suitable for all metals, wood and plastics.

Made in Germany

Khối chà nhám SIAFAST, 9090 siabloc

Foam, with hook-and-loop fastener for abrasive sheets, for dry sanding, 1 side extra-soft (white), 1 side medium-hard (blue), for sanding flat surfaces, corners, edges, curves, etc.

Appropriate accessories: 382450 Sanding paper siarexx 1960 siarexx cut Stock packages 10 pieces

Made in Switzerland

Giấy nhám Siarexx, 1960 siarexx cut

siafast hook-and-loop fastening system, semi-friable aluminium oxide, with special stearate coating, reduces premature clogging. For keying and sanding off paint and varnish, sanding of solid wood and veneer, keying and fine sanding of primer and filler, sanding after wetting the wood surface, and sanding between coats on surfaces and curves.

Sheet size 70 mm x 125 mm

Usable with: 382440 Hand sanding block siafast 9090 siabloc

Stock package 100 pcs, grit 60 = 50 pcs

Made in Switzerland

Thanh chà nhám

Wedge-shaped sheet support surface of plastic, with quick clamping device. Ideal for sanding in hard-to-reach areas.

Appropriate accessories:

382600 Economy roll of corundum cloth sia 2915 siarol

382620 Economy roll of corundum cloth 3M 3M 314D

382630 Economy roll of aluminium oxide cloth FUTURO

Made in Eu

Thanh chà nhám

For filing, sanding, deburring; quick and easy replacement of the abrasive band, for corundum cloth abrasive band.

Appropriate accessories:

382600 Economy roll of corundum cloth sia 2915 siarol

382620 Economy roll of corundum cloth 3M 3M 314D

382630 Economy roll of aluminium oxide cloth FUTURO

Made in Switzerland

Thanh chà nhám

Excellent for work on sand moulds and cores; for removing and re-finishing intersections and separators; the wedge shape makes them ideal for both very tight spaces and large surfaces.

Stock package 10 pcs

Made in Germany

Thanh chà nhám-382475

Buff sticks made of wood, covered with sandpaper, soft emery, hide glue bonding, resistant to deformation; soft, polishing abrasion. For polishing and fine work on precious metals (watches and jewellery), manual pre-polishing of precision parts, very fine deburring work. Precise shape and edge grinding; high surface quality, no scratches. Stock package 100 pcs Other shapes and grits available upon request.

Made in Switzerland

Thanh chà nhám-382476

Buff sticks made of wood, covered with sandpaper, soft emery, hide glue bonding, resistant to deformation; soft, polishing abrasion. For polishing and fine work on precious metals (watches and jewellery), manual pre-polishing of precision parts, very fine deburring work. Precise shape and edge grinding; high surface quality, no scratches. Stock package 100 pcs Other shapes and grits available upon request

Made in Switzerland

Thanh chà nhám-382478

Wooden buff files, covered with sandpaper, soft emery, bound with hide glue, dimensionally stable, polishing, soft grinding. For polishing and ultra-fine processing of premium-quality precious metals (watches and jewellery), manual polish-grinding of precision parts, ultra-fine deburring. Precision form and edge grinding, high surface quality, no scratches.

Made in Switzerland

Đế chà nhám

For neat manual dressing or sanding of surfaces and edges; ground on all sides, fitted on both sides with one each self-adhesive abrasive sheets grain 150 and 220, four pendulum feet enable quick changeover from coarse to fine-grain sanding paper, worn sheets can be pulled off quickly and easily; standard accessories: 5 each abrasive sheets grain 150 and 220.

Appropriate accessories: 382490 Abrasive sheet

Made in Switzerland